INTRODUCTION

Top Abstract Introduction Materials and Methods Results Discussion References

A 4.6-kb double-stranded RNA (dsRNA) virus, ScV-L-A (also known as ScV-L1), can be found in many laboratory strains of the yeast Saccharomyces cerevisiae. Like most fungal viruses, ScV-L-A is exclusively cytoplasmic, has no infectious cycle, and is known to be naturally transmitted only by budding or by cell fusion during mating (16). It is a member of the Totiviridae, which are dsRNA viruses with a single essential viral dsRNA (6).

The viral genome has two open reading frames (ORFs) on its plus strand that overlap by 129 bases (Fig. 1). The first ORF is designated cap or gag (after the retrovirus nomenclature) and encodes the 76-kDa major capsid polypeptide. The second, pol, encodes the viral RNA-dependent RNA polymerase (12, 14, 21). Translation of pol as a 171-kDa Cap-Pol fusion protein is permitted by a programmed 1 ribosomal frameshift (12, 14, 21, 40) (Fig. 1). A second, separately encapsidated viral dsRNA (M₁) encodes a secreted polypeptide toxin (k1 killer toxin) that provides a convenient phenotype for detecting synthesis of Cap and Cap-Pol (4, 34, 37).

View larger version (18K): [in this window] [in a new window]   FIG. 1.   (A) The 4.58-kb dsRNA genome of ScV-L-A. (B) The two ORFs, cap and pol, of the ScV-L-A plus strand, separated by the 1 frameshift within the overlapping region. (C) The ScV-L-A 76-kDa 0 frame protein product Cap and the 171-kDa fusion protein Cap-Pol.

Programmed, or directed, ribosomal frameshifting (PRF) is of particular value to viruses that package their plus strands, as it eliminates the need to splice their mRNAs and reduces the risk of packaging defective genomes. It also regulates the ratio of viral proteins synthesized. Examples of the phenomenon (both +1 and 1 shifts) have been found in a wide range of systems. In addition to the ScV systems, programmed translational frameshifting has been identified in retroviruses (17, 23, 30, 32); coronaviruses (5, 20); giardiaviruses, which are also members of the Totiviridae (41); two bacterial genes (3, 8); bacteriophage genes (7); astroviruses (28); the yeast EST3 gene (27); and the rat, mouse, Xenopus, and Drosophila ornithine decarboxylase antizymes (29) (reviewed in references 13 and 18). A significant number of cellular genes may utilize 1 PRF (19).

The ScV-L-A frameshifting site fits a fairly well described motif for promoting a 1 translational frameshift. There is a heptanucleotide slippery site (bases 1958 to 1964, GGGUUUA) and a region capable of forming a pseudoknot (bases 1969 to 2023) (14, 40) that together comprise the 71-nucleotide (nt) region that has been shown sufficient to support frameshifting (40) (Fig. 2). The existence of the stems of the pseudoknot and the requirement of the pseudoknot for frameshifting have been verified by mutagenesis (14, 40).

View larger version (15K): [in this window] [in a new window]   FIG. 2.   Possible structure of the ScV-L-A pseudoknot. The slippery site is in italics starting at base 1958. The second stem is shown with two more base pairs than in some formulations (14).

The proposed mechanism for the 1 translational frameshift, simultaneous slippage, was verified for Rous sarcoma virus by sequencing the frameshift product (22). In the case of L-A, the model predicts that the tRNA^Gly-tRNA^Leu in the P and A sites of the ribosome slips backward one base to pair with the Gly-Phe codons of the 1 pol reading frame (Fig. 3). Translation of the Cap-Pol fusion protein can then proceed in the 1 frame. This predicts a sequence of GLRS through the frameshift site, which has been verified by protein sequencing (T.-H. Tzeng and J. A. Bruenn, unpublished data). This frameshifting event has been shown to take place in vitro in rabbit reticulocyte lysates approximately 3.5% of the time a ribosome encounters the slippery site (40) and is important in regulating the stoichiometry of Cap and Cap-Pol in vivo (15). The 1 translational frameshifting event has been shown to require a ribosomal pause at the slippery site (38, 39), presumably because the ribosome is physically impeded by the intact pseudoknot just 3' to the slippery site (39). The 5' end of the ribosome paused at the slippery site has been previously mapped to bases 1946 and 1949 (39) by ribosomal heelprinting (42). Analysis of mutants demonstrates that ribosomal pausing is necessary but not sufficient for frameshifting (38, 39).

View larger version (17K): [in this window] [in a new window]   FIG. 3.   Simultaneous slippage model (22) shown here for ScV-L-A. A tRNAGly-tRNALeu pair in the 0 frame (underlined) P and A site of the ribosome slips back one nucleotide to pair with the 1 frame (pol) Gly-Phe codons, leaving mispaired nucleotides in the wobble position of each 1 frame codon.

In this report, the primary pause site is shown to be at base 1945 rather than 1946. The translational intermediate associated with a ribosome paused at this position is detected; using in vitro translation and quantitative heelprinting, the rates of synthesis, the ribosomal pause time, the proportion of ribosomes paused at the slippery site, and the fraction of paused ribosomes that frameshift are estimated. About 10% of ribosomes pause at the slippery site in vitro, and some 60% of these continue in the 1 frame. Ribosomes that continue in the 1 frame pause on the average about half a minute at the slippery site in vitro.

	MATERIALS AND METHODS

Top Abstract Introduction Materials and Methods Results Discussion References

Plasmid construction. Plasmid pGEM7ZCTU was constructed as previously described (40). Briefly, an L-A cDNA fragment of 396 bp (1783 to 2179) was inserted into a HindIII-Csp451 digested pGEM-7Zf(+) vector (Promega). The fragment contained the 71-nt minimal region necessary to support frameshifting. Plasmid 7zCTUSS was constructed by site-directed mutagenesis according to the method of Kunkel (26), with modifications as described elsewhere (40). In 7zCTUSS, base 1958 (G) is changed to an A to inhibit the 1 frameshift by preventing the simultaneous slippage of the tRNA^Gly-tRNA^Leu backward into the pol reading frame. Mutants 7ZCTUm3, a disruption of stem 1 of the pseudoknot, 7ZCTUm5, an inverted restoration of stem 1, and 7ZCTUd9, a deletion of the L-A bases beyond 2012, which truncates stem 2 of the pseudoknot, were constructed as described elsewhere (40).

In vitro transcription. Transcripts for in vitro translations and heelprint analysis were made as described by Kreig and Melton (25) from the plasmids described above linearized with SspI (Bethesda Research Laboratories). Transcription for protected fragment analysis used [³²P]UTP (specific activity, 3,000 Ci/mmol) at a final concentration of 1 µM and nonradioactive UTP at 0.1 mM. Transcripts for the pulse-chase translations and the heelprint showing artifacts (Fig. 5) were done with SspI-linearized pGEM constructs that yielded a 1,114-base message. Transcripts for the heelprint in Fig. 6, the translations in Fig. 8, and the protected fragment analysis were made with XbaI-linearized pGEM constructs that gave a 480-base transcript.

In vitro translation. Translations were performed with rabbit reticulocyte lysates as previously described (39). A standard translation was at 26°C for 25 min without a chase with nonradioactive methionine. Translation products were expected to be 75 amino acids long (slipper site stop [SST] product), 110 amino acids 0 frame stop [0ST] product, and 234 amino acids (frameshift [FS] product) for SspI-linearized template transcripts of 1,114 bases. XbaI-linearized templates give a runoff translation FS product of 160 amino acids, while the SST and 0ST products are the same. For [³⁵S]Met-labeled translations, the final volume of the reaction was 50 µl, of which 33 µl was lysate. Protected fragment translations were done in a 25-µl volume, of which 17.5 µl was lysate. In each translation, the FS and SST products have a single methionine (at the N terminus), while the 0ST product has three methionines.

Heelprinting. Heelprinting (see Fig. 4) was performed as described elsewhere (39, 42), with additional modifications as follows in later heelprints. The final reaction volume was 25 µl, of which 17.5 µl was lysate. All translations and heelprints were done at room temperature and used about 3 µg of RNA. The Flexi (Promega) rabbit reticulocyte system was used. The nuclease digestion to degrade all RNA not protected by ribosomes was performed in 40 µl of 1 mM cycloheximide-3.5 mM magnesium acetate-3 mM CaCl₂, first with micrococcal nuclease (final concentration, 10 U/µl; Boehringer Mannheim) at room temperature for 10 min, then with RNase V1 (Pharmacia) at a concentration of 17.5 U/ml for 10 min, and then with pancreatic RNase A (25 µg/ml) for an additional 5 min. The heelprinting reaction was completed as described previously (39) except that the nuclease-liberated monosomes with protected fragments were spun through the sucrose cushion at 70,000 rpm in a Beckman TLA 100.3 rotor for 30 min.

Protected fragment quantification. Protected RNA fragments were generated by translation of gel-purified [³²P]UTP-labeled RNA combined with cold transcripts generated from the same template. The transcription reactions containing the [³²P]UTP were run on an 8 M urea-4.5% polyacrylamide gel. The positions of the full-length transcripts were visualized with a Molecular Dynamics PhosphorImager, after which they were cut from the gel and eluted. Approximately 10⁶ cpm of the purified transcript was then combined with 3 µg of the corresponding cold transcript and used to program the rabbit reticulocyte translations. The reactions were then taken through the heelprinting procedure described above to the point where ribosome-protected RNA fragments were precipitated in ethanol. The fragments were then dissolved in 8 µl of diethyl pyrocarbonate-treated H₂O and subjected to a modified version of the RNase reaction described by Myers et al. (31). In this procedure, 2 µl of protected fragments was added to each of three separate reactions containing 27 µl of a solution of 80% formamide, 40 mM piperazine-N,N'-bis(2-ethanesulfonic acid) (PIPES; pH 6.4), 0.4 M NaCl, and 1 mM EDTA; 2 µg of a 76-base oligonucleotide identical to the minus strand of L-A from bases 1985 to 1910 was added to one of the three reactions for each mutant. The SS hybridizations used an oligonucleotide identical to this with the single change of C to T at 1958. Each reaction was then brought to a final volume of 30 µl, heated to 90°C for 2 min, and placed at 45°C for 30 min to ensure hybridization of the RNA fragments to the oligonucleotide. The samples were spun briefly and then diluted to 60 µl with a solution containing 20 mM Tris-HCl (pH 7.5), 2 mM EDTA, 400 mM NaCl, and 200 mM LiCl. To one of the reactions with RNA fragments and no oligonucleotide and to the reaction with RNA fragments and oligonucleotide, 0.06 µg of pancreatic RNase (RNase A) was added. The reaction mixtures were incubated at room temperature for 20 min, after which 1 µl of 3' RNAsin was added to each. The samples were phenol-chloroform-isoamylalcohol extracted twice, made to 0.3 M sodium acetate, diluted twofold with cold ethanol, incubated at 20°C for at least 1 h, spun for 20 min at 4°C, rinsed with 70% ethanol, and vacuum dried. The samples were then dissolved in 4 µl of 1× sequencing gel loading buffer (36), boiled for 2 min in a water bath, and resolved on an 8 M urea-8% polyacrylamide gel next to a DNA sequencing reaction as a size marker. The resulting bands for each mutant were quantified relative to that of the controls for that mutant, using a Molecular Dynamics PhosphorImager.

In vivo frameshifting assays. Wild-type (WT) killer⁺ cells were transformed with a series of plasmid-based GCN2^c-constitutively active alleles of the eIF-2^c kinase, which inhibit translational initiation to various degrees from strong to weak (33) (kindly provided by A. Hinnebusch and T. Dever). PRF was measured with the tester pTI25 (0 frame control), pF8 or pJD104 (1 or +1 ribosomal frameshift tester respectively), or pT124 (1 frameshift suppression) (2, 14).

Statistics. Standard errors in rates or ratios of rates were determined by calculating the limits of intercepts or slopes of straight lines with the statistical program StatView. Standard errors of individual values were determined from repeated measurements.

	RESULTS

Top Abstract Introduction Materials and Methods Results Discussion References

A number of parameters of pausing can be estimated in vitro. From the rate of in vitro translation and the time it takes all ribosomes to finish translating in the 1 frame after a chase with nonradioactive methionine, it is possible to estimate the maximum time a ribosome pauses at the slippery site. An independent estimate of the average pause time can be made from heelprinting. From the heelprinting data and from the ratio of the rates of synthesis of the SST and FS products, it is possible to derive independent estimates of the fraction of paused ribosomes that frameshift. Similarly, by altering the rates of initiation, it is possible to estimate the fraction of paused ribosomes that frameshift in vivo.

Heelprinting. Heelprinting experiments with ribosomes translating the L-A message were repeated in order to develop conditions for making quantitative measurements of paused ribosomes. The heelprinting technique (outlined in Fig. 4) is designed to map the 5' position of some factor (in this case a ribosome) that protects mRNA from nuclease digestion. The same primer and template are used to generate the sequencing ladder and the primer extension that becomes the heelprint. Where the primer extension is inhibited by a protected RNA fragment hybridized to the template, a band results, migrating on the gel to a position corresponding to the most 5' nucleotide of the message protected by a ribosome from nuclease digestion. The position is identified by comparison with the adjacent sequencing ladder.

View larger version (20K): [in this window] [in a new window]   FIG. 4.   Heelprinting technique (42). In step 1, translating ribosomes are stopped on the template with cycloheximide and EDTA and unprotected mRNA is digested away, liberating monosomes. In step 2, the monosomes are collected through a sucrose cushion and the ribosomal proteins are stripped away, yielding protected RNA fragments. In step 4, the fragments are annealed to an ssDNA that has a region complementary to the message used in the translation. The heteroduplexes stop the extension of a primer at the 5' ends of the RNA fragments that were protected from nuclease by the ribosome. In step 5, the primer extensions are elaborated next to a DNA sequencing ladder generated with the same primer on the same ssDNA template, thereby mapping the 5' end of the protected RNA fragment.

View larger version (76K): [in this window] [in a new window]   FIG. 5.   Heelprinting results with micrococcal nuclease. Lanes represent the SS and d9 mutants, control with mRNA left out of translation, and control with no reticulocyte or RNA used in the heelprinting reaction (no frag).

View larger version (130K): [in this window] [in a new window]   FIG. 6.   WT and mutant heelprints and a heelprint without added RNA ().

Quantification of ribosome-protected fragments. Using conditions such that the majority of ribosome-protected fragments are derived from ribosomes paused at the slippery site, it is possible to determine what proportion of ribosomes pause here.

View larger version (29K): [in this window] [in a new window]   FIG. 7.   Quantitative protected fragment recovery. Protected RNA fragments from the WT, SS, and M3 constructs are shown after recovery from the hybridization procedure (see Materials and Methods) with no DNA oligonucleotide and no RNase (lanes a), no DNA with RNase (lanes b), or with DNA and with RNase (lanes c).

Identification of translation products. Ribosomal pausing during 1 translational frameshifting has also been demonstrated by in vitro translation using the coronavirus infectious bronchitis virus pseudoknot (38). A transient translational intermediate of a size expected for a ribosome paused at the pseudoknot was identified. Ribosomal pausing (albeit at reduced levels) using a simple stem-loop with the same base pairs as the pseudoknot is also demonstrable. While ribosomes did pause in the latter construct, they did not frameshift, indicating that pausing may be required but is insufficient for frameshifting, as also demonstrated by heelprinting (39).

View larger version (55K): [in this window] [in a new window]   FIG. 8.   Standard translation of WT, SS, M3, M5, and M6 constructs. Positions of 0ST, SST, and FS products are indicated. These translations had no chase with nonradioactive methionine.

Kinetics of synthesis of translation products. Translations of WT, SS, and M3 mRNAs terminated after 20 min are shown in the first lanes in Fig. 9. Immediately after the zero point was taken, the reaction was divided into two halves, one of which was brought to 40 µM cold methionine to chase transient products. The other half of the reaction was allowed to continue without dilution of the labeled methionine, and aliquots were taken from each half of the reaction as indicated. As in Fig. 8, the WT construct clearly shows the production of the FS, 0ST, and SST proteins, while the SS mutant shows the SST and 0ST products but not the FS product. The presence of the SST in both the WT and SS constructs but its absence in M3 is predicted by the heelprint shown in Fig. 6, which indicates that there is a ribosomal pause at the slippery site (heelprint at 1945) for the WT and SS constructs but not for M3. By PhosphorImager analysis, the accumulation of the translation products 0ST, SST, and FS shown in Fig. 9 can be quantified and the rate of synthesis can be estimated. The rate of synthesis of any in vitro translation product should be proportional to the number of ribosomes translating it. Hence, the frameshift efficiency can be estimated either from the relative rates of synthesis of the FS and 0ST products, corrected for the molarity of methionine in the products, or from the molar ratio of the total amounts of FS and 0ST that accumulate during synthesis. (The 0ST product has three methionines, while the SST and FS products each have only one, so the 0ST product is three times more intense per mole.) From the kinetics of synthesis of the FS and 0ST products (Fig. 10 and 11), the relative ratio of rates of synthesis, corrected for methionine content in the products, gives a frameshift efficiency of 6.1% ± 0.7%. From the accumulation of translation products after 60 min of synthesis (in the absence of a methionine chase), still in the linear portion of the curve, the molar proportion of FS product to total products is 5.2%, fairly close to measured in vivo rates of frameshifting (see below).

View larger version (66K): [in this window] [in a new window]   FIG. 9.   Pulse-chase in vitro translations. Reaction mixtures were incubated for 20 min and divided in half. One half was chased with cold methionine, and aliquots were taken from each half (with [+] or without [] Met) at the indicated time points. Positions of the SST, 0ST, and FS products are indicated.

View larger version (20K): [in this window] [in a new window]   FIG. 10.   Kinetics of synthesis of the WT 0ST product from the data of Fig. 9. The ordinate is relative molar units, generated by the PhosphorImager volume report but divided by 3 to account for the difference in the number of methionines between the 0ST and the FS and SST products. The equation for the least squares line calculated is given.

View larger version (22K): [in this window] [in a new window]   FIG. 11.   Initial kinetics of synthesis of the WT SST product and FS product, as in Fig. 10, from the same experiment as that of Fig. 10, in relative molar amounts.

Fraction of ribosomes that are paused from in vitro translations. As above, the number of ribosomes translating an in vitro translation product should be proportional to its rate of synthesis. Hence the percentage of ribosomes that pause at the slippery site can be calculated from the relative initial molar rates of accumulation of the SST and 0ST products. From Fig. 10 and 11, this is 14.5% ± 2.2%. However, not all of this represents paused ribosomes. It is clear from Fig. 9 that not all of the SST product can be chased into FS or 0ST; some of it persists, presumably due to incorrect termination of ribosomes and release of SST (1, 24), which is not degraded as it would be in vivo.

Percentage of paused ribosomes that frameshift. The relative numbers of paused ribosomes that pause and that go on in the 1 frame can be estimated from the ratio of rates of synthesis of FS and SST from Fig. 11. The percentage of paused ribosomes that frameshift at the slippery site is the ratio of FS rate to SST rate times 100 = 100 × (6.1 ± 0.7)/(10.6 ± 2.2) = 57.5% ± 23%. This assumes that all ribosomes translating in the 1 frame have undergone a detectable pause at the slippery site, an assumption justified by the demonstrable dependence of frameshifting on pausing (Fig. 5, 6, and 8).

Translation rate. A number of calculations depend on knowing the actual rate of in vitro protein synthesis under our conditions. The average rate of translation can be estimated from the initial time of appearance of products of known size. The initial times of appearance of the control protein (luciferase, 552 amino acids) and the 0ST product (110 amino acids) are 33.5 ± 3 min (not shown) and 17.8 ± 0.5 min (Fig. 10), respectively. If both have the same initial delay before synthesis (mainly due to the time it takes to equilibrate the tRNA^Met with labeled methionine), a rate of 28.2 ± 7 amino acids/min in the in vitro translation (considerably slower than in vivo) is calculated. A similar answer results from making the same assumption about the synthesis of luciferase and the SST. The initial delay is calculated to be 13.9 min, which agrees well with data obtained by chasing with nonradioactive methionine (see below).

Estimate of pause time from translation rates. The minimum pause time in the 1 frame can be estimated from the intercepts of the SST and FS synthesis lines (Fig. 11). The SST is first visible at about 10 min (10.2 ± 1 min), and the FS appears at about 20 min (20.2 ± 2 min). Hence, it takes about 10 min (10.1 ± 3 min) minus the time it takes to translate the remaining 159 amino acids, or 10.1 ± 3  (159/28.2 ± 7) = 4.5 ± 5 min, minimum, to resolve the paused ribosome at the slippery site in the 1 frame. The standard deviation here is very large, and the minimum pause time is not significantly different from zero.

View larger version (20K): [in this window] [in a new window]   FIG. 12.   Translation activity remaining during the chase with nonradioactive methionine for the M3 0ST (m3 ST) and WT FS. The percent activity remaining (AR) is calculated from the plateau value of the PhosphorImager volume report for the FS or 0ST (P) and the value at 0 to 50 min after the chase of the volume report (V), as follows: AR = 100[(P  V)/P].

Estimate of average pause time from translation chases. The small percentage of ribosomes continuing on in the 1 frame takes much longer to clear, and the average pause time for these can also be calculated (Fig. 12) from the time it takes half of them to clear (16.5 min) minus the time it takes half the 0ST ribosomes to clear (6 min). Again, as above, subtracting the time it takes to translate from the 0 frame termination codon to the 1 frame termination codon gives 10.5  (4.4 ± 1.5) = 6.1 ± 1.5 min for an average pause time. A meaningful standard error cannot be calculated for either the maximum or average pause times derived from Fig. 12, but the maximum pause time of 5.6 ± 1.5 min calculated above is not significantly different from the average pause time. The relatively long time necessary to equilibrate the tRNA^Met pool makes this estimate of average pause time inherently inaccurate, but these translational measurements place an upper limit on the pause time.

Ribosome spacing in vivo. It is also possible to perturb 1 PRF in vivo in order to measure some of its characteristics. Since the RNA pseudoknot must denature to allow passage of the ribosome, the passage of subsequent ribosomes will be affected by (i) the relative rates of pseudoknot renaturation, (ii) ribosome transit speeds, and (iii) the temporal distance between elongating ribosomes. If pseudoknot renaturation rates and ribosome transit speeds are constant, then mutations or conditions affecting initiation rates could result in changes in the temporal spacing between elongating ribosomes. This would change the amount of time available for renaturation of the pseudoknot (which was denatured by a prior transiting ribosome) before it encountered the next transiting ribosome. Therefore, those conditions which decrease rates of translational initiation would result in elongating ribosomes being spaced further apart. Consequently, the pseudoknot would have more time to renature, leading to an increase in the percentage of ribosomes that encounter the renatured pseudoknot, increasing the percentage of paused ribosomes and thereby increasing the overall efficiency of 1 ribosomal frameshifting. Conversely, mutations or conditions which increase initiation rates would yield lower efficiencies of 1 ribosomal frameshifting. Further, since Ty1-directed +1 ribosomal frameshifting and frameshift suppression are independent of an RNA pseudoknot, changing the temporal spacing between elongating ribosomes should have no effect on these mechanisms.

	DISCUSSION

Top Abstract Introduction Materials and Methods Results Discussion References

We have determined, by heelprinting and by analysis of in vitro translation products, that about 10% of ribosomes normally pause at the L-A slippery site and that many fewer pause when the downstream pseudoknot is disrupted. These measurements assume that ribosomes that incorrectly terminate at the pseudoknot do not detectably pause. By these same assumptions, about 60% of paused ribosomes frameshift. The extent of the pause at the slippery site can be calculated by several methods from in vitro translation data, all of which arrive at a pause of minutes, with some uncertainty. A calculation from the fraction of paused ribosomes, assuming a random distribution of ribosomes in the absence of pausing, gives a more exact pause time of about half a minute in vitro. All calculations of ribosomal pause time exceed by at least 10-fold the time it takes to make a single peptide bond.

Our in vitro experiments can best be interpreted to mean that ribosomes may suffer three fates at the frameshift site in L-A mRNA.

Fate 1. About 10% of ribosomes pause at the pseudoknot. Another 4% of the ribosomes prematurely terminate. The remaining ribosomes pass the pseudoknot before it causes an obstruction. This could occur in two ways: the first ribosome translating the message could resolve the pseudoknot, and all subsequent ribosomes could encounter the unwound pseudoknot before it could re-form; or a subset of the Mof proteins or the translational surveillance complex (SC) (35) could recognize and resolve these RNA structures independent of elongating ribosomes.

Fate 2. In the second mechanism, which permits a resumption of 0 frame translation after ribosomes are already paused at the pseudoknot, the MOF gene products seem to be involved, since altering their effectiveness alters the frequency with which the third method of passing the pseudoknot is chosen. Consequently, MOF gene products are probably involved in both the first and second mechanisms by which ribosomes pass the pseudoknot.

Fate 3. The third form of resolution, which is of most interest, requires both the pseudoknot and the slippery site. The pseudoknot is necessary since a simple secondary structure of similar stability causes pausing but not frameshifting (38) and because a mutant with two to four bases of the second stem deleted (depending on how the pseudoknot is drawn) demonstrates ribosomal pausing but not frameshifting (39). The slippery site is necessary, as shown by the present results, since the SS mutant shows essentially normal pausing both by heelprint analysis and by in vitro translation yet reduces frameshifting to very low levels. Therefore, this third mechanism of resolution of the ribosome-pseudoknot complex must require a specific interaction between the pseudoknot and some component(s) of the translation machinery not yet defined. This resolution may be a lengthy process, since ribosomes pause (in vitro) for at least 10 times as long as it takes to make a single peptide bond.

Relationship between in vitro and in vivo 1 PRF. The one experiment we have performed to change the kinetics of 1 PRF in vivo tells us that there are some differences between frameshifting in vivo and in vitro. Our preferred interpretation of the results is that decreasing the initiation rate results in an increase in frameshifting efficiency because the leading ribosome no longer clears the pseudoknot for trailing ribosomes; the pseudoknot now re-forms before a trailing ribosome arrives. The fact that there is a ceiling on frameshifting efficiency, twice the basal rate, regardless of how low the rate of initiation is most simply interpreted to mean that normally 50% of ribosomes pause at the pseudoknot, while with limited initiation, essentially all ribosomes pause. However, this would imply that only 7% of the paused ribosomes shift frame in vivo, while 60% do so in vitro.

Pause time in vivo. The time ribosomes spend paused at the pseudoknot is estimated by two independent methods, both of which arrive at a pause in the range of minutes. If the relationship between the pause time in vitro and the pause time in vivo is the same as the relative rates of translation, this would correspond to several seconds in vivo. However, since the slow rate of translation in vitro is probably due to the diffusion-limited accessibility of charged tRNAs and other components, which are probably closely associated with the translation complex in vivo, and since frameshifting probably requires only components closely associated with the ribosome both in vivo and in vitro, it is not clear that direct extrapolation of in vitro pause times to the in vivo situation is correct. It may be that pause times in vivo are more like those observed in vitro. At any rate, the pause time in vivo is a minimum of several seconds, or at least an order of magnitude longer than the time it takes to complete a single peptide bond.