INTRODUCTION

Top Abstract Introduction Materials and Methods Results Discussion References

Polyadenylation is the process by which the 3' ends of most mammalian mRNAs are formed. In a tightly coupled set of reactions the precursor RNA is endonucleolytically cleaved at a specific site. Next, approximately 250 adenosine residues are polymerized to the cleaved end, forming the poly(A) tail of the final mRNA. It has been clearly established that a poly(A) tail is essential for the survival, transport, stability, and translation of most mRNAs (reviewed in references 8, 32, and 42 to 44).

The elements of the polyadenylation signal in the precursor RNA define the site of polyadenylation through specific binding with a complex of proteins which orchestrate cleavage and polyadenylation. The central, nearly invariant, element of mammalian polyadenylation signals is the AAUAAA sequence, which is the binding site for the cleavage and polyadenylation specificity factor (CPSF) (19). AAUAAA is located 11 to 25 nucleotides upstream of the actual cleavage and polyadenylation site. In addition, it is now well established that sequence elements located 14 to 70 nucleotides downstream of AAUAAA greatly increase the efficiency of utilization of the polyadenylation signal (4, 9, 14, 15, 23, 24, 25, 31, 33, 34, 45, 46, 49). Comparison of the downstream elements (DSEs) of many polyadenylation signals has not provided a clear consensus sequence other than various lengths (6 to 20 nucleotides) of GU- or U-rich sequences. However, the position of the DSE relative to the AAUAAA sequence appears to be important, since the DSE is the binding site for the cleavage-stimulatory factor (CStF) (38), which interacts with CPSF bound at AAUAAA to form a stable polyadenylation complex. Interestingly, the site of polyadenylation and DSE of the human T-cell leukemia virus type 1 polyadenylation signal, which is relatively efficient, are located more than 200 nucleotides downstream of AAUAAA. However, a large stem-loop secondary structure brings the DSE into an optimal position (i.e., 14 to 70 nucleotides away) relative to AAUAAA (1, 3A).

Many mammalian polyadenylation signals appear to conform to the simple structure of an AAUAAA and a GU- or U-rich DSE. However, a growing number of polyadenylation signals have been shown to contain additional efficiency elements located upstream of AAUAAA. These upstream elements (USEs) were originally studied in viral polyadenylation signals, such as the polyadenylation signals of the simian virus 40 (SV40) late genes (7, 36), human immunodeficiency virus (HIV) (6, 13, 40, 41), the adenovirus major late region (12), cauliflower mosaic virus (35), and ground squirrel hepatitis virus (29, 30). More recently, USEs have been found in some cellular genes as well (5, 27). Our studies of the SV40 late polyadenylation signal (LPA signal) suggest that the USEs impart characteristics which provide efficiency, or special levels of control, to the polyadenylation signal. For example, mutation of the LPA signal USEs reduces polyadenylation efficiency by 75 to 85% both in vivo and in vitro (7, 36).

Few generalizations can be made about USEs. Among the USEs which have been studied, no definitive characteristics have been noted. However, functional upstream motifs in the LPA signal and the HIV polyadenylation signal have been characterized (36, 40, 41). In HIV these motifs appear to be involved in the formation of a secondary structure which aids CPSF recruitment to the HIV type 1 polyadenylation signal (16).

The LPA signal is a very efficient polyadenylation signal which contains a more complex structure than most. As shown in Fig. 1, it contains both USEs and DSEs. In addition, the downstream region is more unusual in that it contains three defined elements, two U-rich elements (DSE-U and DSE-U') (Fig. 1) (9, 33, 34) and a G-rich region (DSE-G) (Fig. 1) (3, 28) in between. The DSE closest to AAUAAA (DSE-U) contains the site for CStF binding. The G-rich region has been shown to interact with a protein of the hnRNP H family, which increases polyadenylation efficiency (2, 3, 28). The other downstream U-rich DSE (DSE-U') can bind hnRNP C proteins (45, 46) and functions as a DSE under certain conditions. Specifically, in an in vitro polyadenylation reaction with a substrate representing the entire LPA signal, deletion or mutation of DSE-U' had little effect on polyadenylation efficiency (our unpublished observations). However, if the LPA signal is combined with a splicing cassette, such that a coupled splicing and polyadenylation substrate is formed, mutation of DSE-U' causes diminished polyadenylation and splicing, suggesting that the element may function under conditions of coupled polyadenylation and splicing (10).

View larger version (24K): [in this window] [in a new window]   FIG. 1.   SV40 LPA signal. (A) Features of the SV40 LPA signal. AAUAAA and the cleavage site (An) are shown along with the three USEs (USE1 to -3; blue boxes) and the three DSEs (DSE-U [orange box], a predominantly U-rich element just downstream of the cleavage site; DSE-G [green box], a G-rich region downstream of DSE-U; and DSE-U' [purple box], a second U-rich element further downstream). The numbering above the diagram indicates the SV40 nucleotide numbering. (B) Summary of nuclease structure analyses of the LPA signal. Regions sensitive to the double-strand-specific RNase V1 are indicated in red, and regions sensitive to the single-strand-specific RNase T1 or PhyM are indicated in blue. The white box and asterisks indicate regions which appeared to be inaccessible to the nucleases in the structural analyses (see the text). Note that the diagram does not continue as far upstream as does the structural analysis shown in Fig. 2. (C) Sequence of the region downstream of the cleavage site. The approximate regions of the three DSEs are shown; DSE-U is in orange letters, DSE-G is in green italic letters, and DSE-U' is in purple letters. Regions of the double-stranded structures SR1 to SR4 identified in this study are shown as black bars. The locations of the various linker substitution mutations used in these studies are indicated (see the text).

The USEs of the LPA signal consist of three regions with sequences similar to the sequence AUUUGURA (36). We have previously shown that the U1A protein interacts with the LPA signal and that the USEs are necessary for efficient U1A binding (21). Our data suggest that the interaction of U1A protein may facilitate polyadenylation complex formation or be involved in the coupling of polyadenylation and splicing (22).

The existence of secondary structures in human T-cell leukemia virus type 1 (1, 3A) and HIV polyadenylation signals (11, 16) has been mentioned above. In addition, secondary structures have been suggested to be significant in the functions of several other polyadenylation signals, including those of the equine infectious anemia virus (18), the bovine growth hormone gene (17), the adenovirus L4 gene (37), the human CD59 gene (39), and the murine immunoglobulin M secretory gene (27a). Given these findings and the complexity of the LPA signal, we have used nuclease structure analysis techniques to analyze the secondary structure in the LPA signal. We find that the LPA signal forms a functionally significant secondary structure. Much of the region upstream of AAUAAA is sensitive to single-strand-specific nucleases. The downstream region has both double- and single-stranded characteristics. Both U-rich DSEs are predominately sensitive to the double-strand-specific nuclease RNase V₁, while the G-rich element is primarily single stranded. We find that the U-rich element closest to AAUAAA contains four distinct RNase V₁-sensitive regions. Mutational analyses indicate that the ability to form downstream double-stranded regions correlates with efficient in vitro cleavage. We discuss the possibility that a secondary structure downstream of AAUAAA may be important for the function of polyadenylation signals in general.

	MATERIALS AND METHODS

Top Abstract Introduction Materials and Methods Results Discussion References

Plasmids and substrate RNAs. Substrate RNAs containing the LPA signal were produced by in vitro transcription using T7 RNA polymerase and the plasmid templates described below. RNAs were synthesized either unlabeled or labeled internally with [³²P]UTP. Unlabeled RNAs were transcribed either with (for 3'-end labeling) or without (for 5'-end labeling) a 5' cap structure. RNAs were then dephosphorylated using calf intestinal alkaline phosphatase. After calf intestinal alkaline phosphatase inactivation, the RNAs were extracted with phenol-chloroform and precipitated with ethanol. 5'-end labeling was performed using [-³²P]ATP and polynucleotide kinase, while 3'-end labeling was accomplished using ³²P-pCp and T4 RNA ligase (20). All RNAs were gel isolated by separating the full-length RNAs from smaller transcripts on 5% polyacrylamide-8 M urea gels. The full-length transcripts were eluted from gel slices by overnight incubation in 20 mM Tris HCl (pH 7.5)-400 mM NaCl-0.1% sodium dodecyl sulfate (SDS). The eluted RNAs were phenol extracted and ethanol precipitated.

In vitro polyadenylation cleavage assays. Substrate RNAs were synthesized by in vitro transcription and internally labeled with [³²P]UTP as described above. Labeled RNAs (10⁵ cpm) were incubated in a final volume of 25 µl containing 64 µg of HeLa nuclear extract (26), 250 µM ATP, 1 mM cordycepin, 250 mM phosphocreatine, and 6.5 µl of 10% polyvinyl alcohol. The cleavage reaction mixtures were incubated at 30°C for 30 min. Reactions were stopped by the addition of a high-concentration salt-SDS buffer (20 mM Tris HCl [pH 7.5], 400 mM NaCl, 0.1% SDS), and RNAs were purified by phenol-chloroform extraction and then ethanol precipitation. RNA products were fractionated on a 5% acrylamide-8 M urea gel and visualized by autoradiography. Products were quantitated using a Molecular Dynamics Storm PhosphorImager.

RNA sequencing and structure analysis. RNAs, either 3' or 5' end labeled, were analyzed by both sequencing and structure-probing reactions which were modified from previously established procedures (20). Prior to all reactions, the RNAs were thawed slowly and then incubated at 37°C for 15 min.

2

3

3

	RESULTS

Top Abstract Introduction Materials and Methods Results Discussion References

Secondary-structure analysis of the wild-type SV40 LPA signal. We made use of RNase sequencing and structure analysis techniques to determine the RNA secondary structure of the LPA signal. The RNases used included RNase T₁, which cleaves at single-stranded G residues; RNase PhyM, which cleaves at single-stranded A and U residues; and RNase V₁, which cleaves double-stranded RNA with no nucleotide specificity.

View larger version (75K): [in this window] [in a new window]   FIG. 2.   RNase sequencing and structure analyses of the region upstream of AAUAAA. Sequencing and structure analysis reactions were carried out with a substrate in which the wild-type LPA signal was labeled at its 5' end with 32P as described in Materials and Methods. The labeling of the lanes indicates the nucleotide(s) (G or AU) being analyzed and whether the analysis is for sequence (Seq.) or structure (Struct.). The lane marked Struct. ds reflects results of the structural analysis using RNase V1, which is specific for double-stranded RNA with no nucleotide preference. The lane marked Ladder contains the oligonucleotide ladder generated by alkaline hydrolysis of the substrate RNA. The panel on the left shows the mock-digested sample (lane Mock), an additional hydrolysis ladder, and the results of repeated sequencing analyses, which provided for better analysis of the structural data. The positions of single-stranded (SS) and double-stranded (DS) regions are indicated on the right as well as the positions of the three USEs, USE1, USE2, and USE3. The asterisks indicate G nucleotides which were not well cleaved by either RNase T1 or V1 in the structure analyses (see the text).

View larger version (56K): [in this window] [in a new window]   FIG. 3.   RNase sequencing and structure analyses of the region downstream of AAUAAA. Sequencing and structure analysis reactions were carried out with an RNA substrate in which the wild-type LPA signal was labeled at its 3' end with 32P as described in Materials and Methods. The lanes indicate the nucleotide(s) (G or AU) being analyzed and whether the analysis is for sequence (Seq.) or structure (Struct.). The lane marked Struct. ds shows the results of the structural analysis using RNase V1, which is specific for double-stranded RNA with no nucleotide preference. The lane marked Ladder contains the oligonucleotide ladder generated by alkaline hydrolysis of the substrate RNA. The lane marked Mock contains the mock-digested sample. The panel on the left provides additional sequence and structural analyses to show reproducibility. The locations of AAUAAA, the cleavage site (An), DSE-U, DSE-G, and part of DSE-U' are indicated at the left of the panels. The positions of single-stranded (SS) and double-stranded (DS) regions as well as the positions of the four prominent double-stranded regions, SR1 to SR4 (see the text), are indicated at the right of the panels. It should be noted that the sample used in the Struct. ssAU lane was overly digested with RNase PhyM, which resulted in low levels of cleavage at A's and U's in the double-stranded regions SR1 to SR4.

Structure of the regions upstream of AAUAAA. A more detailed examination of the data for the upstream region (Fig. 1B and 2) shows that USE1, the upstream element closest to the AAUAAA (Fig. 1), was consistently sensitive to the single-strand-specific nucleases and resistant to RNase V₁. This element is very AU rich, and its single-stranded nature can be seen by the prominent RNase PhyM cleavages. Previous linker substitution mutational analysis (36) to examine the individual effects of the three USEs indicated that USE1 has the most significant effect on polyadenylation efficiency. Thus, the marked single-stranded characteristic of USE1 may be functionally significant. Interestingly, it was difficult to determine the structures of USE2 and USE3. The asterisks in Fig. 1B and 2 indicate specific examples of G's which were cleaved by RNase T₁ in the sequencing reactions but failed to be cleaved by either RNase T₁ or RNase V₁ in the structure analysis. This result indicates that there are structural features in the RNA which protect these nucleotides from access by the relatively large nucleases. Please note that the results of our sequencing and structure analyses in Fig. 2 extend further upstream than is diagrammed in Fig. 1B.

Structure of the regions downstream of AAUAAA. As mentioned above, a significant portion of the downstream region is sensitive to the double-strand-specific nuclease RNase V₁. A distinct pattern of four double-stranded regions can be seen. These are denoted structural regions 1, 2, 3, and 4 (SR1 to -4) (Fig. 3). The positions of these regions with respect to those of the three DSEs (DSE-U, DSE-G, and DSE-U') and the nucleotide sequence of the downstream region are shown in Fig. 1C. The first U-rich DSE (DSE-U) (Fig. 1C), nearest AAUAAA, is predominantly double stranded, whereas the G-rich DSE (DSE-G) is single stranded. The final U-rich DSE (DSE-U') is again within a double-stranded region as indicated by RNase V₁ sensitivity (note that the RNase V₁ sensitivity of DSE-U' is not shown in Fig. 3). Figure 3 and results of additional structural analyses (not shown) suggest that the structure of AAUAAA is predominantly single stranded; however, the first two A's of AAUAAA consistently show sensitivity to RNase V₁.

Integrity of the downstream structure during mutation of the upstream region. We next asked whether the formation of the four downstream double-stranded regions, SR1 to SR4, was dependent on the presence of the upstream region. Figure 4 shows the structures of SR1 to SR4 as analyzed with RNase V₁. It is clear that the wild-type structure of the region (lane WT) changed very little either by the deletion of all sequences upstream of AAUAAA (lane US Seq.), or by specific linker substitution mutagenesis of the three USEs (lane UM123). Thus, the formation of the downstream SRs, SR1 to SR4, is independent of upstream sequences.

View larger version (56K): [in this window] [in a new window]   FIG. 4.   Integrity of SR1 to SR4 during mutation of the upstream region. The RNase V1 sensitivity of the prominent downstream double-stranded regions SR1 to SR4 was analyzed using substrates in which the wild-type LPA signal RNA was labeled at its 3' end with 32P (lane WT) and two mutants in which (i) the entire region upstream of AAUAAA was deleted (lane US Seq.) or (ii) the three USEs were mutated by specific linker substitution mutagenesis (lane UM123).

Correlation of function with the formation of the downstream double-stranded structure. To determine the functional significance of the downstream double-stranded regions (SR1 to -4), we examined several linker substitution mutations in the downstream region. Each mutation was examined for its effect on structure, which was correlated with its effect on in vitro polyadenylation efficiency. The mutations tested are shown in Fig. 1C, where the exact bases substituted are indicated by boxes (mutants DM2 to -4) or lines (mutants aD2 and bD2). The mutant sequences substituted in each case are described in Materials and Methods.

View larger version (55K): [in this window] [in a new window]   FIG. 5.   Correlation of downstream structure with in vitro cleavage efficiency. The RNase V1 sensitivity of the downstream region, particularly SR1 to SR4, was analyzed using 32P-3'-end-labeled substrates representing the wild-type LPA signal (WT) and the LPA signal containing linker substitution mutants in the downstream region (DM2, DM3, DM4, aD2, bD2, and abD2). The locations of these mutations in the LPA signal are shown in Fig. 1C. The results of three WT structure analyses are provided to demonstrate reproducibility. The boxes at the bottom show the percentage of cleavage by each of the substrates as measured in an in vitro cleavage reaction by using a HeLa cell extract (see Materials and Methods). The wild-type cleavage activity is set at 100%, and the standard error of the analyses is ±5%.

	DISCUSSION

Top Abstract Introduction Materials and Methods Results Discussion References

In this report we have described RNA secondary structure as a functional feature of the LPA signal. In the introduction we noted a number of examples where the secondary structure of a polyadenylation signal appears to play a role in function. Many of these examples were based on a computer-predicted structure with minimal experimental conformation. We have provided experimental characterization of the secondary structure, concluding that the upstream region is predominantly single stranded and that the downstream region contains functionally significant double-stranded regions. We have not presented a diagram of a base-paired secondary structure, since attempts to generate such structures using available programs have resulted in either structures which do not completely correspond to the nuclease sensitivity data or structures which are thermodynamically unfavorable when the programs are forced to consider the nuclease sensitivity data. Our nuclease sensitivity analysis provides a first approximation of the solution structure of the LPA signal in the absence of proteins. Although our data suggest that this structure correlates with function, there are clearly many additional aspects of the structure which are yet to be determined as discussed below.

The upstream region. Our data indicate that the region upstream of AAUAAA is predominantly sensitive to single-strand-specific nucleases, suggesting a relatively large region of linear, nonstructured RNA. USE1, the USE closest to AAUAAA, is clearly single stranded; this is the USE with the greatest effect on polyadenylation efficiency. However, the structures of USE2 and -3 were difficult to determine because these regions were relatively resistant to both single- and double-strand-specific nucleases. This result is interesting, since it suggests a higher-order structure in which the nucleotides in the region of USE2 and -3 are folded such that they are not accessible to the comparatively large nucleases.

The downstream region. The downstream region's predominant characteristics are the double-stranded SRs, SR1 to SR4, within the U-rich DSE closest to AAUAAA (DSE-U), followed by the starkly single-stranded region encompassing the majority of the G-rich DSE (DSE-G). Our data show that the structures formed in SR1 to SR4 are solely a property of the downstream region, since mutation or deletion of sequences upstream of AAUAAA had no effect on the formation of SR1 to SR4.

Downstream secondary structure as a general characteristic of polyadenylation signals. Our data indicate the functional significance of the secondary structure in the downstream region of the LPA signal. However, the specific mechanism requiring this secondary structure for function is yet to be identified. The sequences encompassing SR1 to SR4 contain the site for CStF binding. It is possible that the secondary structure aids the CStF interaction. Indeed, the downstream secondary structure in the murine immunoglobulin M gene polyadenylation signal may affect polyadenylation complex formation (27a).