Previous Article | Next Article ![]()
Molecular and Cellular Biology, May 2002, p. 3264-3275, Vol. 22, No. 10
0270-7306/02/$04.00+0 DOI: 10.1128/MCB.22.10.3264-3275.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Division of Biology and Center for Molecular Genetics, University of California, San Diego, La Jolla, California 92093-0634
Received 1 November 2001/ Returned for modification 14 December 2001/ Accepted 7 February 2002
|
|
|---|
131) subunit of TFIIIC. The analysis also identifies a connection between Bdp1 and posttranscriptional processing of Pol III transcripts. Yeast genomic library screening identified RPR1 as the specific overexpression suppressor of very slow growth at 37°C due to deletion of Bdp1 amino acids 253 to 269. RPR1 RNA, a Pol III transcript, is the RNA subunit of RNase P, which trims pre-tRNA transcript 5' ends. Maturation of tRNA was found to be aberrant in bdp1-
253-269 cells, and RPR1 transcription with the highly resolved Pol III transcription system in vitro was also diminished when recombinant Bdp1
253-269 replaced wild-type Bdp1. Physical interaction of RNase P with Bdp1 was demonstrated by coimmunoprecipitation and pull-down assays. |
|
|---|
In human cells, two TFIIIB-related assemblies have been identified (46, 60). TFIIIB
, which contains TBP, Bdp1 (previously called hTFIIIB150), and Brf2 (a hBrf1 paralogue previously called hTFIIIB50), is required for transcription of Pol III genes with upstream promoter elements, such as 7SK and U6 (53, 61). TFIIIBß, containing TBP, Bdp1, and Brf1, is required for transcription of genes with internal promoters (53). Alternatively spliced variants of hBrf1 have also been noted (44). Human TFIIIB interacts with a subcomplex of Pol III-specific subunitshRPC32, hRPC39, and hRPC62 (homologues of yeast Rpc31, Rpc34, and Rpc82, respectively)through direct interactions hBrf1 and hTBP with hRPC39 (63). The conservation of interactions of yeast and human Brf1 and yRPC34/hRpc39 implies a conservation of TFIIIB functions between yeast and higher eukaryotes. Functional domains of the subunits of yeast TFIIIB have been analyzed by in vitro transcription, gel shift assay and DNA footprinting (3, 13, 24, 26, 29, 30, 36, 55, 56). Although TFIIIB can bind directly to genes with strong TATA boxes (43), most Pol III-transcribed genes of S. cerevisiae, including most tRNA genes, require prior TFIIIC binding to boxA and boxB promoter sites (6, 34). TATA box-directed binding of TFIIIB is mediated by TBP. TFIIIC-dependent recruitment of TFIIIB to Pol III promoters is mediated through interaction with Brf1 and potentially with Bdp1 and TBP (5, 15, 20, 42). The fully assembled TFIIIB-DNA complex is very stable against dissociation by high concentrations of simple electrolytes and polyanions.
The ability to recruit Pol III to the transcription start site is a key property of TFIIIB, but its Brf1 and Bdp1 subunits also play an essential role in postrecruitment steps of transcriptional initiation in vitro (22, 29, 31, 32). Less is known about functions in vivo (22), particularly in regard to Bdp1. The work that is presented here is intended to fill this gap.
Recent studies of RNA polymerase II (Pol II) focused on the relationship between transcription and mRNA maturation. mRNA processing factors, capping enzyme, splicing factors, and polyadenylation factors interact with general transcription initiation factors or with Pol II itself (reviewed in reference 49). Pol III transcripts also undergo processing. In particular, three processing steps are required for tRNA maturation: 5' end processing by RNase P, 3' end processing involving La (yeast Lhp1) and intron excision by endonuclease- and ligase-mediated splicing (2, 4, 17, 45, 67, 69). La is not essential for yeast viability (68); all genes encoding subunits of RNase P and splicing endonuclease are essential (8, 62). Direct interactions of transcript-processing enzymes with the Pol III transcription apparatus of yeast have not been examined. Human La, a phosphoprotein, is involved in 5'- and 3'-end processing of tRNA (18, 25), but little is known about its interaction with the relevant endonucleases.
In this work, we present the results of an analysis that identified the parts of Bdp1 that are essential to its functioning in vivo. The effects of deleting segments of Bdp1 on viability were examined, and core essential segments of Bdp1 were identified. We also report on suppressors and enhancers of conditional viability that indicate interactions of particular segments of Bdp1 with other components of Pol III transcription and identify a relationship between Bdp1 and posttranscriptional processing of Pol III transcripts.
|
|
|---|
bdp1::TRP1 ura3-52 lys2-801amber ade2-101ochre trp1-
63 his3-
200 leu2-
1) carrying a BDP1 expression plasmid (51). The originally resident BDP1-expressing the 2µm plasmid (YEp24; URA+) was replaced by the CEN plasmid pRS316 BDP1WT (constructed as specified below) in two steps. First, the strain was transformed with pRS315 BDP1WT and transformants were grown on 5-FOA medium to eliminate YEp24 BDP1. Second, pRS315 BDP1WT was displaced by freshly introduced pRS316 BDP1WT by selection on SD plates for Leu- Ura+ growth. Plasmids and primers. BDP1 expression plasmids with a centromere (CEN6/ARSH4) or 2µm origin were constructed by PCR cloning. The BDP1 expression cassette plasmid pRS315UD was constructed by inserting the flanking segments of the BDP1 open reading frame, 0.5 kbp upstream from its ATG codon and 0.5 kbp downstream from its stop codon, as appropriately cleaved PCR products, using primers AIP003, AIP004, AIP005, and AIP006. The upstream and downstream fragments were inserted between the XhoI and PstI sites and between the BamHI and SacI sites of pRS315 (CEN6/ARSH4 LEU2) (57). The BDP1 wild type and all internal deletion mutants were transferred with the use of primers AIP007 and AIP010 from previously described Escherichia coli expression plasmids (36) between the PstI and BamHI sites of pRS315 UD. Terminally truncated bdp1 mutant expression plasmids were cloned with the use of the following primers: bdp1-(1-487), AIP007-AIP071; bdp1-(1-464), AIP007-AIP072; bdp1-(1-441), AIP007-073; bdp1-(1-352), AIP007-AIP008; bdp1-(40-594), AIP068-AIP010; bdp1-(40-487), AIP068-071; bdp1-(40-464), AIP068-AIP072; bdp1-(40-441), AIP068-AIP073; bdp1-(138-594), AIP013-010; bdp1-(138-487); AIP013-AIP071; bdp1-(138-464), AIP013-AIP072; bdp1-(158-594), AIP069-AIP010; bdp1-(158-487), AIP069-AIP071; bdp1-(186-594), AIP070-AIP010; and bdp1-(352-594), AIP009-AIP010. Wild-type and mutant BDP1 with flanking sequence or the flanking sequence alone was transferred as XhoI/SacI fragments into vectors pRS316(CEN6/ARSH4 URA3) and pRS423(2µm HIS3) (10, 57). Multicopy plasmids pRS423TBP, pRS423B70 (BRF1), and pRS423B90 (BDP1) were gifts from I. Willis (54). pRS423 PCF1 and pRS423 PCF1-1 were derived from pRS313 PCF1 and pRS313 PCF1-1 (50, 66), also from I. Willis, by transfer between the two PvuI sites of pRS423.
A multicopy S. cerevisiae genomic library constructed with 4- to 5-kbp inserts from a partial Sau3AI digest inserted into the BamHI site of YEp352 (58) was a gift from S. Emr (University of California, San Diego). The RPR1 gene was lifted out of suppressor plasmid pDm1SR#14 by PCR amplification using primers AIP095 and AIP096 and inserted between the SalI and EcoRI sites of YEp352 (CEN4/ARS1, URA3) and pBluescript KS(+), respectively, to generate YEp352 RPR1 and p RPR1.
The following primers were used: AIP003 (5'-AACTCGAGCGAACACTGGCTCACTGCTAATTCTTTCG-3'), AIP004 (5'-AACTGCAGCTGGTAATCAGTGGCTCCTTGCCGC-3'), AIP005 (5'-AAGGATCCTTTATATGCATACATAATGGATAAATAGC-3'), AIP006 (5'-AAGAGCTCTTATAATTAAGATCTGGAAACTTCGC-3'), AIP007 (5'-AACTGCAGATGAGTAGTATTGTTAATAAAAGTGG-3'), AIP008 (5'-AAGGATCCTTAAGGAATGTCAGCGTTGAGTAGTTTATC-3'), AIP009 (5'-AACTGCAGATGCCTGAGTCAGACCGCAAAGCACATACG-3'), AIP010 (5'-AAGGATCCTTATTGATCAATCTCAGGCTCTTC-3'), AIP013 (5'-AACTGCAGATGGACAACGAAAGTCGTCCAAGTTTTAA-3'), AIP068 (5'-AAACTGCAGATGGAAAGTAAAGAAATAGAAGAAGAT-3'), AIP069 (5'-AAACTGCAGATGGGGACTGCGCGACGTTTATCTAC-3'), AIP070 (5'-AAACTGCAGATGCTGAAAACTTTCAAAAGACATAGG-3'), AIP071 (5'-AAGGATCCTTATTCGCAGCAATACTCATCAAAATT-3'), AIP072 (5'-AAGGATCCTTATTTCTTCTCCTCATTAACGAATTTG-3'), AIP073 (5'-AAGGATCCTTACAAATTGAAATCTGTCCCCCACAT-3'), AIP095 (5'-AAAGAATTCTAAAAATCAATCAATCATCGTGTG-3'), AIP096 (5'-AAAGTCGACGCCGATAAGGTGTACTGGCG-3').
In vitro transcription.
TFIIIC, Pol III, and the recombinant proteins TBP, Brf1, and Bdp1 were purified as previously described (32). Preinitiation complexes were formed in 20 µl of transcription buffer (40 mM Tris-HCl [pH 8.0], 70 mM NaCl, 7 mM MgCl2, 3 mM dithiothreitol [DTT], 100 µg of bovine serum albumin [BSA] per ml) with 100 ng of template plasmid (pTZ1 [SUP4] or p RPR1) at 21°C for 40 min. Transcription was started by adding 5 µl of transcription buffer containing 1 mM (each) GTP, ATP, and CTP and 125 µM [
-32P]UTP (10,000 cpm/pmol) and continued at 21°C for 30 min (30). Transcripts were separated by 8 M urea-8% polyacrylamide gel electrophoresis (PAGE) and analyzed with phosphorimager plates.
Immunoprecipitation and pull-down assays.
Yeast total cell extracts were prepared from 50 g of S. cerevisiae (strain YBS334; MAT
pep4-3 prb1-1122 ura3-52 leu2-3,112 reg1-501 gal) (23) grown in YPD medium. Cells were broken in 100 ml of disruption buffer (75 mM Tris HCl [pH 8.0], 6% [vol/vol] glycerol, 200 mM ammonium sulfate, 1.5 mM DTT, 0.15 mM EDTA, 1 mM phenylmethylsulfonyl fluoride [PMSF], and 0.5% benzamidine HCl) with glass beads. After centrifugation (10,000 x g, 1 h), the supernatant was dialyzed against buffer containing 50 mM Tris HCl (pH 8.0), 10% (vol/vol) glycerol, 100 mM NaCl, 0.5 mM DTT, 0.1 mM EDTA, and 0.01% Tween 20. Rabbit antibodies to E. coli-produced recombinant yeast TBP (full length), Brf1 (full length), and Bdp1 (amino acids 40 to 487) were prepared. Protein A affinity beads (protein A-Sepharose CL-4B; 25 µl) were saturated by incubation with each antiserum (250 µl) and used for immunoprecipitation. Recombinant Bdp1, Bdp1
253-269, or BSA (50 µg each) was immobilized on cyanogen bromide-activated Sepharose 4B beads (10 µl) in 1 ml of buffer containing 50 mM HEPES (pH 7.8), 10% (vol/vol) glycerol, 100 mM NaCl, 0.5 mM DTT, 0.1 mM EDTA, and 0.01% (vol/vol) Tween 20 overnight at 4°C and blocked with the same buffer containing BSA (100 µg/ml). These beads were incubated with yeast cell extract (5 mg of protein) in 1 ml of binding buffer (50 mM Tris HCl [pH 8.0], 10% [vol/vol] glycerol, 100, 200, or 300 mM NaCl, 0.5 mM DTT, 0.1 mM EDTA, 0.01% [vol/vol] Tween 20, 1 mM PMSF) for 3 h at 4°C. After two washes with 1 ml of the corresponding binding buffer, ligands were eluted in 200 µl of binding buffer with 100 mM NaCl and 1% (wt/vol) sodium dodecyl sulfate (SDS) (see Fig. 7A) or in 200 µl of 50 mM Tris HCl (pH 8.0)-10% (vol/vol) glycerol-1 M NaCl-0.5 mM DTT-0.1 mM EDTA-0.1% Tween 20-1 mM PMSF (Fig. 7B). These samples were extracted with phenol-chloroform-isoamyl alcohol (25:24:1), ethanol precipitated with carrier sonicated salmon sperm DNA (6 µg), separated by 6 M urea-6% PAGE, and analyzed by Northern blotting.
![]() View larger version (57K): [in a new window] |
FIG. 7. Affinity purification of RPR1 RNA with Bdp1. (A) Immunoprecipitation by TFIIIB-specific antibodies. Yeast total cell extracts were mixed with anti-TBP, anti-Brf1, and anti-Bdp1 immobilized on protein A affinity beads. Protein A beads without antibody were used as a control (lane 2). Material eluting from washed beads with buffer containing SDS was separated by PAGE, and RPR1 RNA was detected by Northern blotting for RPR1 RNA (top) and for tRNAIle (bottom). Three percent of input RPR1 RNA is pulled down by immobilized Bdp1 while the greatly overexposed lower panel shows less than 0.01% of input tRNAIle binding to immobilized Bdp1 (compare lanes 5 and 1). (B) Pull-down assay using immobilized recombinant Bdp1. RNase P was pulled down from yeast total cell extract by these beads in buffer containing 100 (lanes 2, 3, and 6), 200 (lanes 4 and 7), or 300 (lanes 5 and 8) mM NaCl. Immobilized BSA was used as a negative control (lane 2; buffer with 100 mM NaCl). Material eluting from washed beads with buffer containing 1 M NaCl was resolved and detected by Northern blotting as in panel A. The averages of three experiments are given at the bottom of the panel as a percentage of input RPR1 RNA. Input controls (lanes 1 of all panels) were loaded with 10% of the total nuclear extract used for each assay.
|
253-269 mutant cells were grown at 30°C in YPD containing 20 µg of adenine, 15 µg of L-lysine, 10 µg of L-histidine, and 10 µg of uracil per ml and harvested just before and 30, 60, 120, and 240 min after a temperature shift to 37°C. Harvested cells were frozen, disrupted with glass beads in disruption buffer (100 mM NaCl, 10 mM EDTA, 50 mM Tris-HCl [pH 7.5], 5% SDS), and extracted with an equal amount of phenol-chloroform-isoamyl alcohol (50:50:1). After precipitation with ethanol, aliquots of extracted total RNA (10 µg) were separated by 7 M urea-PAGE (6 or 8%) and transferred to nylon membranes in 20x SSC (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). Membranes were incubated in hybridization buffer (40% formamide, 180 mM NaCl, 20 mM Na cacodylate [pH 7.5], 1 mM EDTA, 0.1% SDS, 120 µg sonicated salmon sperm DNA/ml, and 1% dextran sulfate) for 2 h and then overnight at 45°C in the same buffer containing each radioactively labeled probe (1 µCi/ml). Membranes were washed with 2x SSC at room temperature and again with 0.2x SSC-0.1% SDS at 60°C to dissociate nonspecifically binding hybridization probe. Signals were analyzed and quantified by phosphorimager plate analysis. The following 5' 32P-labeled DNA probes were used: RPR1 (5'-GGCTCCACTGTGTTCCACCGAATTTCCCAC-3'), U4 snRNA (5'-CACCGAATTGACCATGAGGAGACGGTCTGG-3'), 5S rRNA (5'-CAGTTGATCGGACGGGAAACGGTG-3'), U6 snRNA (5'-CGGTTCATCCTTATGCAGGGGAACTGC-3'), and tRNAIle(UAU) (5'-GCTCGAGGTGGGGTTTGAACCCACGACGG-3').
|
|
|---|
253-269, bdp1-
312-325, bdp1-
327-338, bdp1-
340-353, and bdp1-
355-372 mutants] were viable and five of these [bdp1-(1-487), bdp1-(40-487), bdp1-
253-269, bdp1-
312-325, and bdp1-
355-372 mutants] showed different growth phenotypes (Fig. 1). In the multicopy (2µm) plasmid series, three additional mutants [bdp1-(138-487), bdp1-(158-594), and bdp1-(158-487) mutants] were viable, and only one mutant that was viable in the CEN series, the bdp1-
355-372 strain, was inviable in the multicopy series (Fig. 1). These results identified three separate regions of Bdp1 (amino acids 158 to 252, 269 to 312, and 372 to 487; regions III, II, and I, respectively) that are required in vivo. Regions II and I overlap with domains of Bdp1 that interact with other components of the TFIIIB-DNA complex, as determined by protein footprinting (36), and region I overlaps with the relatively conserved SANT structural domain (amino acids 415 to 472) of Bdp1 (Fig. 1). In general, the requirements for Bdp1 in vivo are more restrictive than for function in the resolved Pol III transcription system in vitro (36; unpublished results) (Fig. 1, right).
![]() View larger version (27K): [in a new window] |
FIG. 1. Viability of cells producing truncated and internal-deletion Bdp1. Bars show the extent of the retained BDP1 open reading frame (594 amino acids) in expression cassette plasmids pRS315UD (CEN LEU2) and pRS423UD (2µm HIS3), both of which contain flanking 0.5-kbp promoter- and terminator-proximal segments of BDP1. Shading indicates growth at 30°C after 5 days. Open bars, completely defective; black bars, viable; gray bars, viable but showing Ts and/or Cs conditional growth with a CEN or multicopy plasmid, as indicated on the right. Growth of strains in the CEN series was observed on SD plates lacking tryptophan and leucine but containing 5-FOA. Growth of strains in the multicopy plasmid series was observed on SD plates lacking histidine and leucine but containing 5-FOA. The abilities of the corresponding proteins to support TFIIIC-dependent transcription of the SUP4 tRNATyr gene and TFIIIC-independent transcription of the U6 snRNA gene are shown on the right (data from reference 36 and unpublished data). The locations of the SANT domain and of two segments of Bdp1( ) that are protected from hydroxyl radical-mediated cleavage upon assembly into a TFIIIB-DNA complex ( ) are indicated at the bottom. nd, not determined.
|
131, TFIIIC131, and Pcf1) interact directly with Bdp1 (5, 9, 13, 35, 47, 52). To detect suppression by plasmid shuffling, strains carrying pRS316 BDP1WT and mutant genes on CEN plasmids were transformed by multicopy pRS423 plasmids carrying the SPT15 (encoding TBP), BRF1, or TFC4 gene or the TFC4 dominant mutant PCF1-1 gene with a mutation in the second tetracopeptide repeat (originally isolated as a suppressor of negative effect of a tRNA gene boxA promoter mutation [50]), and also the wild-type BDP1 gene as a control. None of the bdp1 deletion mutants that were inviable when harbored on CEN plasmids in Fig. 1 were rescued by TBP, Brf1, or Tfc4 overexpression. One bdp1 deletion strain, bdp1(40-487), which was Ts and Cs in the initial screen (Fig. 1), failed to grow in the somewhat more complex multicopy suppression screen in attempts with two different CEN vectors (data not shown). The remaining eight bdp1 mutant strains that retained viability after loss of pRS316 BDP1WT (by 5-FOA counterselection followed by verification of uracil auxotrophy) were examined for growth phenotype at 18, 30, and 37°C in the multicopy suppression strains. The amino acid 355 to 372 deletion proved to be lethal at 30°C in cells overexpressing PCF1-1, the dominant gain-of-function variant of Tfc4 (data not shown), and was not examined at other temperatures. The Cs phenotype of bdp1-(1-487) was weakly suppressed by SPT15 (TBP) overexpression (Table 1; Fig. 2A, left). The completely Ts phenotype of bdp1-
312-325 was suppressed by overexpression of BRF1 (Table 1; Fig. 2C, right). The Ts phenotype of another internal deletion mutant, the bdp1-
253-269 mutant, was evidently dominant, as it was not suppressed by wild-type BDP1 (Fig. 2B, right). The normal growth phenotype of the bdp1-(40-594) strain at 37°C was somewhat impaired by overexpression of PCF1-1 both at 18°C and at 37°C (Table 1). Curiously, the bdp1-(138-594) strain, with the more extensive N-terminal deletion, did not show any influence of PCF1-1 overexpression. |
View this table: [in a new window] |
TABLE 1. Effects of overexpression of Bdp1-interacting proteins on temperature phenotypes of Bdp1 mutant strains
|
![]() View larger version (114K): [in a new window] |
FIG. 2. Multicopy suppression by Bdp1-interacting proteins. 5-FOA-resistant strains (Table 1) were tested for growth at 18, 30, and 37°C. (A) The bdp1-(1-487) partial Cs phenotype (very slow growth at 18°C) is partly suppressed by TBP overexpression. (B) The partial Ts (very slow growth) at 37°C phenotype of the bdp1- 253-269 internal deletion mutant is not suppressed, even by BDP1. (C) Brf1 overexpression suppresses the Ts phenotype of bdp1- 312-325.
|
![]() View larger version (85K): [in a new window] |
FIG. 3. Viability of cells producing split Bdp1. Twelve combinations of plasmids were tested by plasmid shuffling. Three-plasmid transformant cell lines carrying pRS315 BDP1WT and two other plasmids in various pairwise combinations were constructed. Neither of the terminally truncated bdp1-(1-352) nor bdp1-(352-594) mutants confers viability separately after elimination of the wild-type BDP1 gene, but they do so in combinations of plasmids pRS315 bdp1-(1-352) with pRS423 bdp1-(352-594) and pRS315 bdp1-(352-594) with pRS423 bdp1-(1-352) after elimination of the wild-type gene (bold).
|
253-269.
Cells producing Bdp1
253-269 in place of wild-type Bdp1 grow very slowly at 37°C but normally at 30 and 18°C. The Ts phenotype conferred by this deletion was not suppressed by overexpression of TBP, Brf1, or Tfc4 (Table 1). As noted above, even the BDP1 wild-type gene on plasmid pRS423 did not rescue temperature sensitivity (Fig. 2B). In order to isolate suppressors, a yeast genomic library in the multicopy plasmid YEp352(URA3) was screened. From 10,000 transformants, 16 candidates were isolated (Dm1SR#1 to -16) at 37°C as cells that grew well. Seven of these were 5-FOA sensitive at 37°C (Dm1SR#3, -4, -8, -9, -10, -12, and -14). The corresponding candidate plasmids were isolated and used to retransform the bdp1-(
253-269) strain. All retained the normal growth phenotype at 37°C, and their inserts were sequenced. Five plasmids (pDm1SR#8, -9, -10, -12, and -14) contained DNA from the same location on chromosome V (bp 116,000 to 120,000) (Fig. 4A); two plasmids (pDm1SR#3 and -4) contained BDP1.
![]() View larger version (80K): [in a new window] |
FIG. 4. Identification of a suppressor gene of bdp1- 253-269. Arrows show inserted yeast genomic DNA fragments (from a partial Sau3AI digest genomic library) and orientations in the BamHI site of YEp352. (A) Five of seven suppressor plasmids cover the same region of chromosome V. YEp352 RPR1 has the indicated RPR1 fragment cloned between the EcoRI and SalI sites of YEp352 by PCR cloning (gray arrow). (B) Suppression of bdp1- 253-269 by YEp352 RPR1. Extremely slow growth at 37°C is fully restored by RPR1 overexpression.
|
253-269, because this mutation was found to be dominant relative to coexpression of BDP1 in the pRS423 multicopy plasmid (Table 1). It is conceivable that expression efficiency differs between pRS423B90 (BDP1) and the genomic library BDP1 suppressors in YEp352 (Fig. 2B and Table 1). In fact, Western blotting indicated lower levels of Bdp1 accumulation when BDP1 was expressed in pRS423B90 relative to the genomic BDP1 clone pDm1SR#3 (in YEp352) (data not shown).
The suppressor is RPR1.
All five non-BDP1 suppressor clones harbor three genes: TIM9 (a mitochondrial inner membrane protein), YELC (a transposon Ty4 long terminal repeat), and RPR1 (the RNA subunit of RNase P). The suppressor gene was anticipated to be RPR1, for three reasons. First, RNase P is one of the tRNA maturation enzymes, processing the 5' ends of pre-tRNAs. Yeast RNase P is composed of one RNA subunit (RPR1) and nine protein subunits; eight of the nine proteins are common to RNase P and MRP (the mitochondrial rRNA processing enzyme, which also processes nuclear rRNAs). Although the function of RNase P has been characterized, the possibility of a relationship between tRNA recognition and Pol III transcription has not been examined. Second, RPR1 has been isolated as a suppressor gene of a mutation in TFC3, the gene encoding
138, the largest subunit of TFIIIC (39). Third, RPR1 appears to be transcribed by RNA Pol III in vivo, as its transcription is impaired by both a temperature-sensitive lesion in RNA Pol III and point mutations in putative boxA and boxB TFIIIC recognition elements (37). To confirm this expectation, RPR1 with its promoter region (see below) was cloned into the multicopy vector YEp352 (2µm, URA3) and used to transform cells producing Bdp1
253-269 (off pRS315). YEp352 RPR1 (Fig. 4A) restored normal growth at 37°C (Fig. 4B).
The Ts phenotype of cells producing Bdp1
253-269 and its suppression by overexpression of RPR1 might reflect three possible situations. (i) Assembly of TFIIIB with Bdp1
253-269 in vivo may lead to defective transcription of RPR1, which has a tRNA-like promoter with a boxA and a suboptimally placed, imperfect (nonconsensus) boxB (38). (ii) Interaction between RNase P and Bdp1 in the Pol III initiation complex may be required for effective RNA processing; the deletion of amino acids 253 to 269 may weaken that interaction. (iii) Globally lower Pol III transcription levels due to Bdp1
253-269 may generate a deficit of RPR1 RNA that is critical at high temperatures. However, TFIIIBs assembled with Bdp1
253-269 and wild-type Bdp1 have approximately the same in vitro transcription activity, DNA-binding activity, and DNase I footprint as TFIIIB assembled with wild-type Bdp1 (36), arguing against the probability of a global effect on all Pol III transcription in vivo.
RPR1 was also tested for suppression of other Bdp1 deletion Ts and Cs phenotypes (Table 1). Introducing pDm1SR#14 (multicopy expression of RPR1) into strains producing Bdp1(1-487), Bdp1
312-325, and Bdp1
355-372 did not restore normal growth at 37°C or, in the case of Bdp1(1-487) and Bdp1
355-372, growth at 18°C (data not shown). We conclude that RPR1 is uniquely a suppressor of bdp1-
253-269.
Pol III transcripts of cells producing Bdp1
253-269.
In order to understand the Bdp1-RPR1 connection, Pol III transcripts were analyzed by Northern blotting. Cells producing wild-type Bdp1 and Bdp1
253-269 (off the appropriate pRS315 plasmid) were grown in YPD medium at 30°C and collected before temperature shift to 37°C as well as 0.5, 1, 2, or 4 h later (Fig. 5A). Aliquots of total RNA (prepared as described in Materials and Methods) were separated on 7 M urea 6 or 8% polyacrylamide gels (Fig. 5B and C) and transferred to nylon membranes for hybridization to detect Pol III transcripts. Specific probes for RPR1 RNA, 5S rRNA, U6 snRNA, and tRNAIle(UAU) were used, and a U4 snRNA (a Pol II transcript) probe served as an internal control. Levels of 5S rRNA, U6 snRNA, and U4 RNA in cells producing wild-type Bdp1 and Bdp1
253-269 were comparable at 30°C and after a shift to 37°C (Fig. 5C). RPR1 RNA and tRNAIle precursors were abnormal in cells producing Bdp1
253-269 at both temperatures (Fig. 5C, lanes 1 and 6). The accumulation of RPR1 RNA was also deficient in mutant cells and the proportion of mature to pre-RPR1 RNA was very different (Fig. 5D). Although tRNAIle levels were approximately normal, the pools of tRNAIle processing intermediates were elevated. Maturation of tRNA can proceed along two pathways: either the 5' and 3' ends of the primary transcript are processed first and the intron is excised subsequently, or both termini are processed after splicing. In wild-type Bdp1-producing cells, intron-retaining intermediates of tRNAIle maturation accumulated to the same levels at 30 and 37°C and the +5'/3' form was not detected (Fig. 5C, bottom). In mutant cells, transcripts retaining the 5' leader (reflecting absence of cleavage by RNase P) were much more abundant than in wild-type cells. Thus, very clearly, 5'-end processing of the tRNAIle Pol III transcript is defective in cells producing Bdp1
253-269. These results eliminate globally defective Pol III transcription in vivo as a primary cause of temperature sensitivity in cells producing Bdp1
253-269 and argue in favor of an RPR1-specific effect, possibly involving a direct interaction of a Bdp1 and RNase P.
![]() View larger version (83K): [in a new window] |
FIG. 5. RNA analysis of cells producing Bdp1 253-269 and wild-type Bdp1. (A) Growth in YPD medium. Cells were harvested at 30°C and 30, 60, 120, and 240 min after a shift to 37°C. (B) Total RNA (10 µg) was separated by 7 M urea-PAGE. The gel is stained with ethidium bromide. (C) Northern blotting of Pol III transcripts (transcr): RPR1 RNA, 5S rRNA, U6 snRNA, and tRNAIle(UAU). U4 snRNA, a Pol II transcript, was used as the internal standard. Two forms of RPR1 RNA were detected; their abundances differ in cells producing Bdp1 253-269. There are distinct differences of tRNA processing at 30 and 37°C. (D) Data from panel C, quantified and compared. Shaded bars, pre-RPR1 primary transcript; open bars, mature RPR1 RNA; diamonds, ratio of mature RPR1 to pre-RPR1 RNA.
|
253-269 (Fig. 6A, bottom, compare lanes 2 to 5 with lanes 7 to 10) the yield of RPR1 transcripts with Bdp1
253-269 was reduced to approximately one-half to one-third of the wild-type level (Fig. 6A, top, compare lanes 2 to 5 with lanes 7 to 10, and 6B), comparable with what was observed in vivo (Fig. 5C and 5D). The transcriptional defect of the RPR1 promoter with Bdp1
253-269 was not compensated for by doubling its concentration or the concentrations of TFIIIC (Fig. 6B). Doubling the concentrations of both Brf1 and TBP approximately doubled RPR1 transcription with both wild-type Bdp1 and Bdp1
253-269 (Fig. 6A and data not shown) and did not compensate for the Bdp1
253-269 defect (Fig. 6B, 2xB'). These results indicate that the RPR1 and SUP4 tRNA promoters require the same complement of initiation factors but suggest a greater sensitivity of transcription of the RPR1 gene, with its variant promoter, to deletion of amino acids 253 to 269 in Bdp1.
![]() View larger version (41K): [in a new window] |
FIG. 6. Transcription. (A) In vitro transcription of the RPR1 (top) and SUP4 (bottom) genes with highly purified Pol III (5 fmol), TFIIIC (1x, 26 fmol), TBP (1x, 50 fmol), Brf1 (1x, 35 fmol), Bdp1 (1x, 150 fmol; wild type or Bdp1 253-269), and template DNA (50 fmol). Lanes 1 to 5, full-length Bdp1; lanes 6 to 10, Bdp1 253-269; lanes 1 and 6, no TFIIIC; lanes 2 and 7, standard quantities of TFIIIC and components of TFIIIB; lanes 3 and 8, twofold-higher quantity of TFIIIC; lanes 4 and 9, twofold-higher quantities of TBP and Brf (B'); lanes 5 and 10, twofold-higher quantity of wild-type or mutant Bdp1. r.m., recovery marker. (B). Ratios of transcript yields with Bdp1 253-269 relative to wild-type Bdp1 for transcription of the SUP4 (closed bars) and RPR1 genes. std, 1x quantities of all components. The averages and standard errors of the means for three experiments are shown.
|
253-269 with somewhat lower efficiency (compare lanes 3 and 6), but the dependence of RPR1 capture by wild-type Bdp1 and Bdp1
253-269 on electrolyte concentration in the binding buffer was comparable (lanes 3 to 8). These experiments point to a physical interaction (though not necessarily a direct one) between Bdp1 and RNase P, although they do not account directly or entirely for the multicopy suppression by RPR1 of the temperature sensitivity conferred by bdp1-
253-269. The interaction that associates RPR1 RNA with Bdp1 is not especially strong, since it can be dissociated with neutral salt. |
|
|---|
10 bp upstream of the TATA box (55). Deleting amino acids 272 to 292 in region II also abolishes TFIIIC-dependent transcription in vitro (36). However, in general, the global requirements for Bdp1 function in vivo are more demanding and restrictive than requirements for function in the defined Pol III in vitro transcription system (36).
![]() View larger version (68K): [in a new window] |
FIG. 8. Functional map of Bdp1. (A) Summary of this work. Solid bars show absolutely required regions I, II, and III. Lightly shaded segments cover abnormal but viable alleles. Open segments are not necessary for normal growth at 18, 30, or 37°C. Sites associated with suppression by RPR1, Brf1, and TBP and synthetic lethality with Tfc4 (Pcf1-1) are marked. (B) Regions of Bdp1 required in vitro (29, 36). U6 gene transcription requires one of the two darkly shaded segments, and both segments are required for tRNA (SUP4) gene transcription. The lightly shaded segment is required for transcription of linear but not supercoiled DNA. (C) Alignment of fungal Bdp1 homologues. Region I and II consensus residues in at least three species are boxed and shaded. Region I is the most conserved and includes the SANT domain. Region II is also conserved. Region III is divergent and not required for in vitro transcription. The preliminary sequences of Bdp1 from C. albicans, N. crassa, and A. fumigatus were obtained from Stanford Genome Technology Center Contig6-2237 (http://www-sequence.stanford.edu/group/candida), WIMCGR Contig2.668 assembly 2 (http://www-genome.wi.mit.edu), and TIGR_5085 (http://www.tigr.org), respectively. The GenBank accession numbers for Bdp1 from S. cerevisiae and Schizosaccharomyces pombe are AAC49073 and CAA22645, respectively.
|
312-325 Ts phenotypes were suppressed by overexpression of TBP and Brf1. In contrast, the bdp1-
355-372 deletion, which confers Ts phenotype on its own, was seen to be synthetically lethal with overexpression of the dominant gain-of-function variant PCF1-1 of the TFC4 gene. These effects suggest that specific segments of Bdp1 are required for (normal) interactions with other components of TFIIIB and with TFIIIC. Although the lethality of deletions covering regions I, II, and III was not rescued by overproducing Brf1, TBP, or Tfc4, this does not exclude these regions as potential sites of such interaction. In fact, the rescue of conditional phenotypes generated by deletions at the boundaries of these Bdp1 segments suggests their involvement also. On the other hand, the ability to split Bdp1 at amino acid 352 is consistent with the nonessential nature of the surrounding 325-to-355 segment of Bdp1.
Relationships between transcription and RNA processing have remained largely unexplored for yeast Pol III. The finding that yeast genomic library screening captures RPR1 as a suppressor of the partial temperature sensitivity of the bdp1-
253-269 strain therefore holds particular interest. The product of the RPR1 gene is the RNA subunit of RNase P. RNase P trims 5' ends of pre-tRNAs to generate mature tRNA, and this function is universally conserved. Bacterial, archaeal, and eucaryal RNase Ps are composed of one RNA subunit and several protein subunits, and their catalytic activity is contained in the RNA subunit (67). Yeast RNase P is also composed of one RNA subunit (RPR1 RNA) and nine protein subunits that are all essential for cell viability (8, 11, 16, 38, 41, 59). Bacterial RNase P recognizes pre-tRNA structure directly (48). This is evidently not the case for the yeast enzyme (67), and how it is brought into contact with its substrate is not known. Finding RPR1 as a suppressor of the temperature sensitivity of the bdp1-
253-269 strain suggests a possible involvement of TFIIIB in posttranscriptional processing of tRNA but could also reflect defective transcription of RPR1 itself, due to the bdp1-
253-269 deletion. RPR1 has a relatively weak promoter with a nonconsensus and suboptimally placed boxB, and RPR1 transcription in vitro by Pol III in conjunction with wild-type TFIIIC and TFIIIB is relatively weak compared to that of the standard SUP4 tRNATyr gene with its near-consensus and optimally configured boxA and boxB promoter sites (Fig. 6A). Under the conditions of analysis, transcription of RPR1 with TFIIIB(Bdp1
253-269) is reduced
2- to 3-fold relative to transcription with wild-type TFIIIB when activities are normalized to SUP4 transcription (Fig. 6). When DNA templates are transcribed under favorable conditions in vitro (using genes with strong promoters, and with transcription factors in excess), Bdp1
253-269 does not generate quantitative defects of transcript yield or qualitative changes of DNA footprint (36, 55), but RPR1 and other genes with weaker promoters might be more sensitive indicators of defects in the transcription apparatus, particularly when transcribed in competition with all Pol III genes in the cell (Fig. 5B and C).
However, this is not the sole defect generated by bdp1-
253-269. Maturation of tRNA [assayed with tRNAIle(UAU)] is also aberrant at 30 and 37°C (Fig. 5C), and the relative accumulation of pre-RPR1 and mature RPR1 RNA is strongly affected (Fig. 5D). It remains conceivable that Bdp1, separately or in conjunction with promoter-bound TFIIIB, interacts directly with RNase P. Pol II processing factors, capping enzyme, and splicing and polyadenylation complexes interact with Pol II transcription through the C-terminal domain of the largest Pol II subunit (49). It is plausible to consider a comparable coupling between Pol III transcription and posttranscriptional processing. Because Pol III transcription units are characteristically short, it is also reasonable to consider the possibility that this coupling could be effected by a transcription initiation factor instead of the elongating RNA polymerase complex.
It might be thought that RPR1 suppression of temperature sensitivity conferred by the bdp1-
253-269 deletion is merely due to nonspecific relief of a quantitative defect of Pol III transcription. If this were the case it would point to RNA processing by RNase P as the Pol III transcript-supported cellular process that is quantitatively most limiting. A similar inference was made when RPR1, along with the genes encoding all three subunits of TFIIIB, the TFC1 and TFC4 subunits of TFIIIC, and the RPC10 subunit of Pol III turned up as multicopy suppressors of a temperature-sensitive mutation in TFC3, the gene encoding the largest subunit of TFIIIC (39, 52). However, we surmise that the connection between RNase P and Bdp1/TFIIIB has a wider significance. First, the temperature sensitivity of the bdp1-
253-269 mutant was not suppressed by overproduction of Brf1, TBP, or Tfc4 (Fig. 2; Table 1). Second, RPR1 multicopy suppression is specific to the 253-to-269 deletion in BDP1. If a mere two- to threefold reduction of RPR1 transcription in vivo were responsible for temperature sensitivity, then RPR1 multicopy suppression should be general to conditions and mutations that depress Pol III transcription. Instead, the RPR1 multicopy suppression is specific to a single BDP1 deletion. Other BDP1 mutations, which presumably also lower transcription in vivo, are specifically suppressed by overproducing TBP and Brf1, for example, but not RPR1 RNA. Third, the specificity of action of yeast RNase P in pre-tRNA processing evidently does not reside in direct substrate recognition. A mediator of specificity is called for; presumably, this additional component is required for efficient catalysis. Finding RPR1 multicopy suppression has, in fact, led to experiments demonstrating that Bdp1 interacts with RNase P/RPR1 RNA with a high degree of specificity and moderate affinity.
We are grateful to the National Institute of General Medical Sciences for support of this work. We appreciate access to the following information. Candida albicans sequence data was obtained from the Stanford Genome Technology Center. Sequencing of C. albicans was accomplished with support of the NIDR and the Burroughs Wellcome Fund. Aspergillus fumigatus sequence data was obtained from The Institute for Genomic Research. Sequencing of A. fumigatus was accomplished with support from NIH, NIAID, and the Wellcome Trust. Neurospora crassa sequence data were obtained from the Neurospora Sequencing Project; Whitehead Institute/MIT Center for Genome research. Sequencing of N. crassa was accomplished with support from NSF.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»