Previous Article | Next Article ![]()
Molecular and Cellular Biology, March 2002, p. 1379-1389, Vol. 22, No. 5
0270-7306/02/$04.00+0 DOI: 10.1128/MCB.22.5.1379-1389.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Institut Pasteur Fondazione Cenci-Bolognetti, Department of Genetics and Molecular Biology, University "La Sapienza," 00185 Rome, Italy,1 Department of Cell Biology, Biozentrum, University of Basel, CH-4056 Basel, Switzerland2
Received 26 September 2001/ Returned for modification 30 October 2001/ Accepted 4 December 2001
|
|
|---|
|
|
|---|
Like genes coding for mRNAs, snoRNA genes are transcribed by RNA polymerase II. 3'-end formation of pre-mRNAs is accomplished by a two-step reaction, which involves endonucleolytic cleavage followed by addition of a poly(A) tail to the upstream cleavage product (60). The yeast cleavage and polyadenylation machinery consists of several complexes: for specific cleavage, cleavage factor IA (CF IA), CF IB, and CF II are required, while polyadenylation occurs when CF IA, CF IB, Pap1p, and polyadenylation factor I (PF I) are present (3, 18, 31, 32, 36, 37). A complex containing PF I and CF II activity (named cleavage and polyadenylation factor [CPF]) has been isolated from yeast extracts by affinity purification (41). Since PF I and CF II subunits were found in a stable and stoichiometric association, it has been suggested that this complex forms a functional unit in vivo.
Previously it was shown that the presence of a pre-mRNA-derived cleavage and polyadenylation signal, such as the one found in the CYC1 gene, is not compatible with the production of a functional box C/D snoRNA. In this case, only polyadenylated unprocessed RNA molecules which did not associate with snoRNP-specific factors and which were unable to methylate their physiological rRNA substrates accumulated (22). Instead, sequences downstream of the snR13 snoRNA coding unit were able to direct efficient 3'-end formation of the upstream snoRNA, and only the cleavage activity of the pre-mRNA 3'-processing machinery was required.
In the present paper we show that this is a more general phenomenon, since box C/D and H/ACA snoRNAs and snRNAs require this type of 3'-end maturation. Thus, uncoupling of cleavage and polyadenylation is necessary for the biosynthesis of a large class of cellular RNAs, in particular for species that do not require the poly(A) tail but instead require 3'-end processing.
Analysis of a large number of mutant alleles in CF IA and CPF components in vivo suggests that CF IA but not CPF is essential for 3'-end formation of small RNAs. Furthermore, sequence comparison and mutational analysis have pointed out the importance of two conserved sequence elements which are presumptive binding sites for processing factors. These findings suggest that, for snoRNA and snRNA 3'-end formation, CF IA can work in cooperation with factors different from those involved in the cleavage and polyadenylation of pre-mRNAs.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Strains used in this study
|
Oligonucleotides.
Sequences of the oligonucleotides used for the different cloning steps are as follows (5'-3'): R13ter-a, CCGCTCGAGCTTTTAACTTCCTCGTAGA; R13ter100-b, GGGGTACCCCCAACGTACTAACATCTTT; R13ter30-b, GGGGTACCGCAGCGCTACGATACAAT; R13ter25-b, GGGGTACCAAGATTTTCTACGAGGAAGTTA; R13ter100-30-a, CCGCTCGAGCGCTGCATATATAATGCGT; R50ter-a, CCGCTCGAGACTAATGTAAGAAACATTTCC; R50ter-b, GGGGTACCGTTGAAATAATTAGTGGCAAC; R47ter-a, CCGCTCGAGATATATTTTCGCGTCATTCTTGC; R47ter-b, GGG GTACCTTTGTACTGCAGATACACAGATTC; R189ter-a, CCGCTCGAGCTATTCTTGTTACTCACTGAT; R189ter-b, GGGGTACCCCAATTCATTTCAACTGTCTAC; RU5ter-a, CCGCTCGAGCTCATTTTCTTGTTTCGGT; RU5ter-b, GGGGTACCCGCGAAACTTTAAAAGCGC; RU2ter-a, CCGCTCGAGTACCACGCAACCAAATATGTA; RU2ter-b, GGGGTACCATTATGAGATGCTGGAGGTAG; RTLC1ter-a, CCGCTCGAGATAATAAAGCCCACCAAATGG; RTLC1ter-b, GGGGTACCCAGTACGGACAACATACTTTA; 1-2a, TCGAGGCGGTAACCTTCTTACATGTAAATCAGAGTAGGTAC; 1-2b, CTACTCTGATTTACATGTAAGAAGGTTACCGCC;
1a, TCGAGGCGGTAACCACATGTAAATCAGAGTAGGTAC;
1b, CTACTCTGATTTACATGTGGTTACCGCC;
2a, TCGAGGCGGTAACCTTCTTACACAGAGTAGG TA;
2b, CTACTCTGTGTAAGAAGGTTACCGCC;
1-2a, TCGAGGCGGTAACCACACAGAGTAGGTAC;
1-2b, and CTACTCTGTGTGGTTACCGCC. Oligonucleotides used for Northern hybridization or primer extension were as follows (5'-3'):
tag, TGCGGACTGCCTGGATCGCG;
snR13, TTCCACACCGTTACTGATTT;
U5, CCTGTTTCTATGGAGACAACACCCGGATGGTTCTG;
snR50, GGGGTACCACGTACTTGTGAAAGTAAATAC;
U2, CCAGTTATGGTGTGTGGCGA;
snR47, GGGGTACCTTTGTACTGCAGATACACAGATTC; and
TRS31, CGCTTGCTTAGGCCCAACAG.
Plasmid construction.
The starting construct GAL/U24* (here renamed CYC1) and T100 construct were described by Fatica et al. (22). The constructs used in this study were obtained by removing the CYC1 terminator from the CYC1 construct by XhoI-KpnI digestion and replacing it with PCR products obtained with the following oligonucleotides: R13ter-a and R13ter100-b (construct C/D13 [named T100 + 20 in Fig. 9C]); R13ter-a and R13ter30-b (construct T30 + 20); R13ter-a and R13ter25-b (construct T25); R13ter100-30-a and R13ter100-b (construct T100-30); R50ter-a and R50ter-b (construct C/D50); R47ter-a and R47ter-b (construct C/D47); R189ter-a and R189ter-b (construct ACA189); RU5ter-a and RU5ter-b (construct U5); RU2ter-a and RU2ter-b (construct U2); RTLC1ter-a and RTLC1ter-b (construct TLC1). To obtain1-2,
1,
2, and
1-2 constructs, the appropriate oligonucleotides (1-2a and1-2b,
1a and
1b,
2a and
2b, and
1-2a and
1-2b) were annealed, phosphorylated, and subsequently cloned in the XhoI-KpnI-digested CYC1 construct.
![]() View larger version (39K): [in a new window] |
FIG. 9. Analysis of the sequences required for 3'-end processing. (A) Alignment of the sequences around the cleavage sites mapped in vivo in the rat1-1 xrn1 strain. The conserved elements are boxed, and their consensus sequences are shown underneath. Grey and black boxes represent the CTT repeat and the TGTAAAT element, respectively. Numbers indicate distance from the 5' end of the corresponding transcript. (B) Oligonucleotides downstream from the U2 and snR50 coding regions were used as primers for a reverse transcription reaction on RNA extracted from W303 (lanes 1 and 3) and the rat1-1 xrn1 strain (lanes 2 and 4). A sequence reaction was run in parallel to map the extension of the 3' cutoff molecules (arrows). The numbers indicate distance from the 5' end of the corresponding transcript. (C and D) Deletion mutants of the natural snR13 3" downstream region (C) and artificial sequences designed on the basis of the two conserved elements found in the snoRNA 3" downstream regions (D). Numbers indicate the extension of the cloned regions according to panel A. The different constructs were transformed into W303; cells were grown in 2% raffinose-0.08% glucose (0 h) and then shifted to 2% galactose for 2 h. Northern blot analysis of 5 µg of total RNA was performed with a 32P-labeled tag-specific oligonucleotide ( tag). The lower panels show control hybridizations with an snR13 snoRNA-specific probe ( snR13).
|
RNA analysis.
Total RNA was extracted from exponentially growing yeast cultures by the hot-phenol method as previously described (47). RNA concentrations were calibrated by absorbance at 260 nm and normalized by hybridization with snR13- and U5-specific oligonucleotides. For Northern blot analysis, typically 5 µg of total RNA was resolved on 6% polyacrylamide-7 M urea gels and electrotransferred at 4°C to Amersham Hybond-N+ filters in 0.5x Tris-borate-EDTA buffer for 16 h at 10 V. All hybridizations and primer extensions were carried out as previously described (57). Oligonucleotides (10 pmol) were routinely 5'-end labeled with 30 µCi of [
-32P]ATP.
Yeast extract and immunoprecipitation experiments were performed as previously described (23, 34).
Preparation of extracts and CPF and CF IA. Extracts competent for in vitro 3'-end processing (processing extracts) were prepared as described previously (12) by cell homogenization in liquid nitrogen (4). For production of whole-cell extracts, the fractionation step using 40% ammonium sulfate was omitted.
CPF was obtained by affinity purification from yeast extracts as previously described (41). Briefly, extracts from cells expressing protein A-tagged Pfs2p fusion protein (strain MO20) were first incubated with immunoglobulin G (IgG)-agarose, the matrix was extensively washed, and bound proteins were released by cleavage with TEV protease (46). The purification of CF IA will be described elsewhere (B. Dichtl and W. Keller, unpublished results).
In vitro transcription and in vitro cleavage assays. Runoff transcription to obtain internally 32P-labeled RNAs was performed as described in reference 37. Conditions for in vitro cleavage of pre-mRNAs were as previously described (36). For processing with factors, 1 µl of CPF and 1 µl of CF IA were incubated in either the absence or presence of 100 ng of glutathione S-transferase (GST)-Nab4p (CF IB) (38) with 20 fmol of labeled RNA for 1 h at 30°C (36). When extracts were assayed, approximately 10 µg of total protein in processing extract or whole-cell extract, respectively, replaced purified factors. To allow cleavage only, magnesium acetate was replaced by EDTA and ATP was replaced by CTP.
|
|
|---|
![]() View larger version (26K): [in a new window] |
FIG. 1. Schematic representation of the constructs used in this study. The GAL1 promoter and the U24* coding region are boxed. The lengths of the regions downstream of the mature 3' end of the corresponding transcript are indicated (in nucleotides [nt]); in the case of U2 and U5, the regions 3' to the Rnt1p site were utilized. All these fragments were amplified by PCR and were cloned in the GAL/U24* backbone.
|
Figure 2 shows the behavior of the sequences present in the 3' downstream regions of several snoRNA genes: snR13 (C/D13), snR50 (C/D50), and snR47 (C/D47) belong to the box C/D family, whereas snR189 (ACA189) is a member of the H/ACA class. The constructs were expressed in strains carrying temperature-sensitive mutant alleles for the RNA15 (rna15-2) and PAP1 (pap1-5) genes and in the isogenic W303 strain. After a 1-h shift to the nonpermissive temperature, transcription was induced by addition of galactose (time zero), and the cells were grown for 2 h more. 3'-end processing can be monitored by the accumulation of product B, whose 3" end corresponds to the 3" end of the mature U24* snoRNA. This species still contains the 5' trailer sequences present in the construct utilized. Since the 5' end of this RNA is capped and no endonucleolytic cleavage sites are present, 5"-3" exo-trimming can occur only after decapping. For this reason the accumulation of a U24 snoRNA with a matured 5" end (band U24*) is quite inefficient.
![]() View larger version (41K): [in a new window] |
FIG. 2. Analysis of different 3' downstream regions on snoRNA processing. The rna15-2 and pap1-5 mutant strains and the isogenic strain W303 were transformed with the constructs indicated above each panel. After a 1-h shift to the nonpermissive temperature (0 h), cultures were induced with galactose for the indicated times. Northern blot analysis of 5 µg of total RNA was performed with a 32P-labeled tag-specific oligonucleotide ( tag). A schematic representation of the A+, B, and U24* molecules is given on the far right. A+ bands correspond to polyadenylatedproducts, while B and U24* molecules have mature 3' ends. The lower panels show control hybridizations with a snR13 snoRNA-specific probe ( snR13). The migration of the size marker (MspI-digested pBR322) is indicated on the far left; sizes are in nucleotides.
|
The presence of polyadenylated species originating from the same coding unit prompted us to check whether these molecules have a different fate than the 3'-processed transcripts. To test whether these species represent stable and functional RNAs, we performed a transcription pulse-chase experiment and an immunoprecipitation analysis. C/D50 was chosen because it showed the highest abundance of A+ products. After 2 h of growth in galactose-based medium, cultures were shifted to glucose-containing medium, and the accumulation of the A+ and B molecules was tested after one additional hour of incubation. As shown in Fig. 3A, the A+ band completely disappeared after 1 h, whereas the B band remained stable. Construct C/D50 was also expressed in strain YAF2 (22), which contains the Nop56p protein, a box C/D-specific factor, fused to the TAP tag (46). The incorporation of the different RNA species into snoRNPs was tested by IgG immunoprecipitation. Figure 3B shows that the RNA present in band B is coprecipitated with the Nop56p, whereas the polyadenylated species is not. The observation that the A+ species is not found in snoRNP complexes argues against the possibility that it is rapidly converted into B molecules. Further support for the hypothesis that A+ molecules do not chase into B molecules comes from the observation that the A+ transcripts produced by the CYC1 construct are not converted to 3'-processed U24 RNA (Fig. 2) (22).
![]() View larger version (55K): [in a new window] |
FIG. 3. Polyadenylated snoRNAs are unstable and do not associate with snoRNP proteins. (A) W303 cells were transformed with the C/D50 construct and grown in 2% raffinose-0.08% glucose (lane 1). Cultures were shifted to 2% galactose for 2 h (lane 2) and then transferred to 4% glucose-containing medium and incubated for 1 h more (lane 3). Northern blot analysis of 5 µg of total RNA was performed with a 32P-labeled tag-specific oligonucleotide ( tag). The lower panel shows a control hybridization with a snR13 snoRNA-specific probe ( snR13). (B) Strain YAF2, containing the NOP56-TAP fusion, was transformed with the C/D50 construct. After 2 h of growth in galactose, cells were lysed and immunoprecipitated with IgG beads. RNA was extracted from pellets (P) and supernatants (S) and run on a 6% polyacrylamide-urea gel. Lane T, RNA extracted from nonimmunoprecipitated extracts. Northern blot analysis was performed with tag. The lower panel shows a control hybridization with a U5 snRNA-specific probe ( U5) which monitors the specificity of the immunoprecipitation. The migration of the size marker (MspI-digested pBR322) is indicated on the left; sizes are in nucleotides.
|
The 3' downstream regions of snoRNA genes are sensitive to CF I but not to CPF. The pre-mRNA cleavage and polyadenylation machinery in yeast is made up of many different factors associated in complexes which have been separated biochemically and classified on the basis of their in vitro activity (60). To test whether CPF activity was required for 3'-end formation of snoRNAs, we expressed the C/D13 construct in strains carrying temperature-sensitive mutant alleles for individual CPF components. As controls, the same strains were transformed with construct CYC1. Figure 4 shows that several mutant alleles of the YTH1 gene, which codes for a CPF component (8), show a strong reduction of the A+ species transcribed from the CYC1 construct (lanes yth1-7, yth1-1, and yth1-4). Similarly, alleles with mutations of the CPF component Yhh1p have a lower level of transcript A+. As expected, rna14-1, rna15-2, and pap1-5 display strong inhibition of A+-RNA accumulation (22). The levels of the A+ CYC1 transcripts were the same in all strains following growth at the permissive temperature (not shown). In comparison to CYC1, the construct containing the 3' downstream region of the snR13 gene is affected only by mutations in proteins belonging to the CF IA complex (rna14-1 and rna15-1), and it is totally unaffected by mutations within CPF subunits.
![]() View larger version (58K): [in a new window] |
FIG. 4. Analysis of 3'-end processing in mutants with mutations in different components of the pre-mRNA 3'-processing machinery. The C/D13 and CYC1 constructs were transformed into the mutant strains and into the isogenic strain W303. After a 1-h shift to the nonpermissive temperature (0 h), cultures were induced with galactose for 2 h. Temperature- and formamide-sensitive mutants (tfs) were grown in 3% formamide. Northern blot analysis of 5 µg of total RNA was performed with a 32P-labeled tag-specific oligonucleotide ( tag). The lower panels show control hybridizations with a snR13 snoRNA-specific probe ( snR13).
|
![]() View larger version (56K): [in a new window] |
FIG. 5. Rna15p is required for 3'-end formation of the chromosomal snR13 transcripts. An oligonucleotide complementary to the coding strand of the TRS31 gene was utilized for primer extension analysis on RNA extracted from the rna15-2 and sen1-1 mutant strains and from the isogenic strain W303. Cultures were grown at 25°C up to an optical density of 0.2 and then shifted to 37°C for the indicated times. As shown schematically below the gel, extended product 1 identifies the 5' end of the TRS31 mRNA, while product 2 corresponds to an elongated RNA starting at the 5' end of the snR13 transcript. Migration of the size marker (MspI-digested pBR322) is indicated on the left; sizes are in nucleotides.
|
![]() View larger version (49K): [in a new window] |
FIG. 6. The U5 and U2 genes contain sequences that respond only to the cleavage activity of the pre-mRNA 3'-processing machinery. The U5 and U2 constructs were transformed into different mutant strains and into the isogenic strain W303. After a 1-h shift to the nonpermissive temperature (0 h), cultures were induced with galactose for 2 h. Temperature- and formamide-sensitive (tfs) mutants were grown in 3% formamide. Northern blot analysis of 5 µg of total RNA was performed with a 32P-labeled tag-specific oligonucleotide ( tag). Migration of the size marker (MspI-digested pBR322) is indicated on the left; sizes are in nucleotides. The lower panels show control hybridizations with an snR13 snoRNA-specific probe ( snR13).
|
So far, only one small nuclear RNA has been described as being transcribed as a poly(A)+ species; this is the RNA component (encoded by the TLC1 gene) of telomerase (17). It was shown that the synthesis of TLC1 RNA under the control of a GAL-inducible promoter produced at the steady-state level 60% of polyadenylated RNA that was then converted into poly(A)- molecules (17). A 195-nucleotide sequence, derived from the 3' downstream region of the TLC1 gene, was cloned in the U24* reporter plasmid and tested for the ability to produce correctly 3'-processed U24* molecules. Figure 7 shows that all observed transcripts accumulate as poly(A)+ species. In agreement with this, the accumulation of the transcripts is affected not only by the rna15-2 mutation but also by pap1-5. This suggests that 3'-end formation of the TCL1 RNA is directed by sequences that respond to the pre-mRNA cleavage and polyadenylation machinery.
![]() View larger version (45K): [in a new window] |
FIG. 7. The telomerase RNA downstream region produces only polyadenylated transcripts. The TCL1 construct was transformed into the rna15-2 and pap1-5 mutant strains and the isogenic strain W303. After a 1-h shift to the nonpermissive temperature (0 h), cultures were induced with galactose for 2 h. Northern blot analysis of 5 µg of total RNA was performed with a 32P-labeled tag-specific oligonucleotide ( tag). Migration of the size marker (MspI-digested pBR322) is indicated on the left; sizes are in nucleotides. A control hybridization with a snR13 snoRNA-specific probe ( snR13) is shown at the bottom.
|
![]() View larger version (52K): [in a new window] |
FIG. 8. CPF, CF IA, and CF IB are not sufficient for correct cleavage of a box C/D snoRNA substrate at the in vivo processing site. The RNA precursors and processing products are indicated on the sides of the panels. Internally 32P-labeled RNAs were incubated with CF IA (lanes 2), CF IA and CPF (lane 3), CF IA, CPF, and 100 ng of GST-Nab4p (lanes 4), processing extract (lanes 5), or whole-cell extract (lanes 6). Input RNA alone was loaded in lanes 1. RNAs were resolved on a 6% polyacrylamide-8.3 M urea gel. HpaII-digested pBR322 fragments were 5'-end labeled and served as markers (lane M). A+ bands identify the sites that become polyadenylated, while the 5' and 3' bands are the 5" and 3' cutoff products when cleavage occurs at the UA"AU sequence, which is utilized as the entry site for 3" processing in vivo.
|
strain. Total RNA extracted from this strain was subjected to reverse transcription analysis with primers specific for regions approximately 200 nucleotides downstream from the 3" end of the mature transcript. This analysis was carried out on box C/D snoRNAs (snR13, snR47, and snR50) and on snRNAs (U2 and U5). It was not possible to map such cleavage sites on U5 snRNA, since most of the signals detected corresponded to the products of U5L snoRNA, which is produced by Rnt1p cleavage (data not shown). Figure 9A
shows the alignment of mapped snoRNA and snRNA downstream regions with respect to the cleavage sites, while Fig. 9B shows an example of such mappings on the U2 and snR50 genes. Conserved sequences can be identified: a TGT/AAAAT element is found in all four genes at a fixed distance (seven nucleotides) from the cleavage site (A"Pu). In addition, several CTT repeats were found upstream and downstream of the cleavage site; however, this sequence was exclusively found in box C/D snoRNA genes. To analyze the significance of these elements, we generated several deletion mutants of the snR13 downstream region and tested their ability to direct 3'-end formation of the reporter U24* snoRNA. Figure 9C shows that a 58-nucleotide region containing all the conserved elements (construct T30 + 20) has the highest activity in terms of the amount of 3'-processed molecules. If only the elements upstream of the cleavage site are maintained (construct T25), cleavage still occurs efficiently, while if they are deleted (construct T100), processing is less efficient. The removal of all three conserved elements (construct T100-30) leads to the almost complete absence of processed RNA.
In order to dissect more precisely the contribution of the two conserved sequences, we made additional constructs in which the two elements (CTTCTT and TGTAAAT) are cloned together (clone 1-2) or separately (clones
1 and
2) in the 3' downstream region of our model construct. The in vivo analysis shows that the highest 3'-end formation activity is obtained when the two elements are present together, while lower activity is revealed when they were cloned separately. Quantitative analysis of the bands indicated that the TGTAAAT element is at least twice as efficient as the CTT repeat. The deletion of both elements completely abolishes 3"-end formation. These results indicate that each single element is able to drive 3"-end formation even though a synergistic effect is obtained when the two sequences are linked.
|
|
|---|
We showed previously that the presence of a pre-mRNA-derived cleavage and polyadenylation signal downstream of a box C/D snoRNA-coding unit was incompatible with snoRNA maturation and function. Instead, a specific sequence which directed efficient 3'-end processing of the test snoRNA and which required only the cleavage components of the CF I complex and not the Pap1 activity was found (22). This finding led us to propose that for a specific set of polymerase II transcripts, the cleavage activity of the pre-mRNA 3'-end formation machinery could be uncoupled from polyadenylation.
In the present paper we extend this mechanism of 3'-end formation to a larger group of nuclear and nucleolar RNAs. Several box C/D snoRNA genes were analyzed, as well as box H/ACA and the U2 and U5 snRNA genes. In all cases, the 3' downstream regions of these genes directed efficient 3"-end processing of a reporter RNA and only minimal amounts of transcripts accumulated as polyadenylated species. Both U2 and U5 snRNA genes contain a downstream Rnt1p cleavage site that was suggested to be the entry site for 3" processing. Nevertheless, it was found that in strains depleted of the Rnt1p factor, mature U2 and U5 snRNA continued to accumulate, although to a lower extent (1, 14, 57). This indicated that processing should have occurred from the 3" end of the primary transcript. Regions downstream of the Rnt1p site were cloned in the test construct and were shown to direct 3"-end processing in a polyadenylation-independent manner.
The only exception among the genes tested is the one encoding the RNA component of telomerase. It was previously shown that when TLC1 was expressed under the control of the GAL1 promoter, poly(A)+ transcripts accumulated and were then chased into poly(A)- species. This suggested a model in which the telomerase RNA is first polyadenylated and then rapidly processed to give the stable poly(A)- form (17). When the 3' downstream region of the TLC1 gene was analyzed in our test system, we found that only polyadenylated RNA species were produced. This case represents an exception to a general model of 3'-end formation by uncoupled cleavage and polyadenylation, but it demonstrates that the model system we used is able to respond specifically to the different 3"-processing signals. Analysis of the endogenous transcripts produced in a rna15-2 strain at the nonpermissive temperature showed the accumulation of a read-through RNA extending inside the gene downstream to the snR13 coding region, showing that CF IA is indeed involved in the 3"-end formation of chromosomal snoRNA transcripts.
The pre-mRNA cleavage and polyadenylation reaction is a very well characterized process mediated by the CF I (A and B) and CPF complexes (38, 41). CPF is essential for both steps of pre-mRNA 3'-end formation, i.e., cleavage and polyadenylation (41). Recently we showed that one function of CPF in pre-mRNA cleavage lies in recognition of the site of polyadenylation (21). Clearly, this activity of CPF would not be required for the recognition of sequences which direct snoRNA and snRNA 3'-end formation, since those are different from cis-acting elements which mediate cleavage and polyadenylation of pre-mRNAs (see below). But it remains unclear whether the requirement for CPF in cleavage of pre-mRNAs is limited to substrate recognition or whether CPF is more directly involved in catalysis of cleavage. Our analysis of mutant CPF subunits indicates that CPF activity is dispensable for 3"-end processing of snoRNAs and snRNAs. We cannot entirely exclude, however, the possibility that mutations in other CPF subunits might have an effect. In contrast to CPF, CF IA is essential for 3"-end formation of snoRNAs and snRNAs. In vitro analysis showed that CF IA alone is not able to cleave pre-snoRNA molecules and that CF IA and CPF together directed cleavage only at those sites that in vivo become polyadenylated and produce nonfunctional molecules. Cleavage at the specific site that in vivo directs 3"-end processing (22) was obtained only when the pre-snoRNA was incubated with whole-cell extracts. Combining these results with the in vivo data on the requirement of CF IA indicates that factors other than CPF and CF IB must cooperate with CF IA for the production of correct 3"-end processing of pre-snoRNA molecules.
Sequence comparison and mutational analysis revealed the presence of two conserved motifs (CTT repeat and TGTAAAT) which are essential for directing 3'-end processing of pre-snoRNAs. These elements are clearly distinct from cis-acting signals which direct 3'-end formation of pre-mRNAs (21, 26, 27). Consequently, recognition of pre-snoRNA cleavage sites is expected to involve a different set of trans-acting factors. Similar to the elements that are involved in pre-mRNA processing, the snoRNA elements are redundant and only one of them is sufficient for 3"-end formation. Our experiments indicate that the CTT repeat and the TGTAAAT element can function separately, even though the second is twice as efficient as the first. A synergistic effect is obtained when the two sequences are linked. The CTT repeat was previously described to be involved in controlling 3"-end maturation of snoRNAs and to respond to the Sen1p factor (45). The TGTAAA sequence was shown to produce the appearance of truncated transcripts when present in an intron downstream of a U6 snRNA coding region. The Nrd1 protein was shown to interact directly with the UGUAAA element and to mediate 3"-end formation in concert with the Sen1 factor (50, 51); Nrd1p was also shown to physically interact with the C-terminal domain (CTD) of polymerase II, with the RNA-binding protein Nab3p, and with the CTD kinase CTDK-1 (19). For this reason, this factor was previously proposed to be involved in transcription termination or transcription elongation, leading to a model in which it would act at the interface of transcription and processing (19, 49). Recent experiments have proved that the Nrd1 protein, together with Nab3, Sen1, and the CTD of polymerase II, is an essential factor for poly(A)-independent 3"-end formation of snRNAs and snoRNAs (52).
Taking all these data together, we propose a model in which CF IA not only functions in association with factors involved in cleavage and polyadenylation of pre-mRNAs but also acts in the 3'-end formation of nonpolyadenylated transcripts in cooperation with a different set of proteins, possibly Nrd1 and its associated factors. It remains to be shown whether these distinct complexes occur independently from each other in the cell or whether they are associated in a highly regulated supramolecular complex. Further work is also necessary for clarifying the role of these factors in processing or termination and for understanding the relationship between these two events. It is interesting that many of the components participating in this reaction also interact with the CTD of the largest subunit of RNA polymerase II (9, 19). This could indicate that specific commitments, with respect to 3'-end formation, could occur very early, possibly during the first steps of transcription. An important point to be addressed in future experiments is whether the type of 3"-processing complex, which forms on the nascent RNA, depends on the type of transcript and on the protein interactions that occur on it. In the case of snoRNAs it would be interesting to test whether snoRNP-specific factors, which are known to bind their substrates at the level of precursor molecules (22, 25), influence the type of 3"-end commitment complex. It seems reasonable to assume that efficient 3"-end formation should occur only when snoRNPs are formed; in contrast, when snoRNP particles are not assembled, the newly transcribed snoRNA would be polyadenylated and directed to the discard pathway.
This work was partially supported by grants to I.B. from MURST-CNR Biotechnology Program L.95/95, from MURST Biotecnologie and PRIN 40%, and from CNR Target Project on Biotechnology and Tecnologie di base della post-genomica. B.D. was the recipient of an EMBO Long-Term Fellowship and was supported by the University of Basel, the Swiss National Science Foundation, and the Louis-Jeanlet Foundation of Medicine.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»