Previous Article | Next Article ![]()
Molecular and Cellular Biology, November 2003, p. 8189-8201, Vol. 23, No. 22
0270-7306/03/$08.00+0 DOI: 10.1128/MCB.23.22.8189-8201.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Microbiology and Immunology and Department of Biochemistry and Biophysics, University of California, San Francisco, San Francisco, California 94143
Received 6 June 2003/ Returned for modification 18 July 2003/ Accepted 11 August 2003
|
|
|---|
cells and show that the gene which encodes it (MF
) is required for
cells, but not a cells, to mate. We also identify the receptor for this mating pheromone as the product of the STE2 gene and show that this gene is required for the mating of a cells, but not
cells. Cells of the a mating type respond to the
mating pheromone by producing long polarized projections, similar to those observed in bona fide mating mixtures of C. albicans a and
cells. During this process, transcription of approximately 62 genes is induced. Although some of these genes correspond to those induced in Saccharomyces cerevisiae by S. cerevisiae
-factor, most are specific to the C. albicans pheromone response. The most surprising class encode cell surface and secreted proteins previously implicated in virulence of C. albicans in a mouse model of disseminated candidiasis. This observation suggests that aspects of cell-cell communication in mating may have been evolutionarily adopted for host-pathogen interactions in C. albicans. |
|
|---|
The second aspect of C. albicans biology relevant to this paper is the recently discovered ability of this organism to undergo sexual mating. Most clinical isolates of C. albicans (including the most common laboratory strain, CAF2-1) are the a/
type and are unable to mate. If these strains are converted to a and
strains through specific mutations or through chromosome loss, a cells can mate with
cells to form tetraploid cells (17, 29). These tetraploids can, in turn, lose chromosomes to produce diploid a and
cells, thereby completing a parasexual cycle (1). Naturally occurring a and
clinical isolates have also been identified (26), and these, too, can undergo mating (25). However, for a and
cells (regardless of their origin) to become mating competent, they must first undergo a heritable, but reversible, transition from the so-called white phase to the opaque phase (30). This switch involves changes in the expression of many genes, including a number of genes implicated in mating (21).
In this paper, we identify the
mating pheromone (
-factor) of C. albicans and characterize the response it elicits in recipient a cells. The gene encoding
-factor is predicted to encode a precursor protein that is processed into three identical tridecapeptides representing the mature
-factor. We show that a synthetic tridecapeptide of this sequence produces long polarized projections in C. albicans a cells, but only when those cells were in the opaque (mating-competent) form; those projections had been previously observed in bona fide mating mixtures (25, 30). The tridecapeptide failed to elicit any morphological response in
cells (white or opaque) or in a/
cells. Additional support for this tridecapeptide being an authentic
-factor comes from the demonstration, using gene knockout strains, that the C. albicans STE2 gene, which is homologous to the Saccharomyces cerevisiae
-factor receptor gene (15, 19), is required for the morphological response of a cells to
-factor. To complete the link between the tridecapeptide and mating, we also show that
cells (but not a cells) with the
-factor gene (MF
) deleted are deficient in mating; likewise, a cells (but not
cells) with the gene encoding the
-factor receptor deleted (STE2) are mating deficient. Microarray analysis of the transcriptional response of a opaque cells to
-factor revealed 62 genes that are induced more than threefold. These genes can be divided into several categories. As expected, one group of C. albicans pheromone-induced genes (18 in all) closely resemble genes previously implicated in mating in S. cerevisiae. However, the C. albicans and S. cerevisiae pathways have diverged considerably, and the majority of the pheromone-induced genes in C. albicans are specific to that organism. These genes include 18 open reading frames (ORFs) with no close relatives in any sequenced genome (including that of S. cerevisiae) and 15 ORFs with at least one close relative but no obvious clues to specific function. The most surprising group of pheromone-induced genes in C. albicans are a set of seven cell surface and secreted proteins that were previously shown to be required for virulence in a mouse model of disseminated candidiasis. This observation indicates that C. albicans utilizes a number of the same cell surface and secreted proteins for both mating and pathogenesis and suggests an evolutionary link between the two processes.
|
|
|---|
-Factor (synthesized by Genemed Synthesis) was dissolved in dimethyl sulfoxide (DMSO) at a concentration of 100 mg/ml and then brought to a final concentration of 10 mg/ml in 10% DMSO.
-Factor was added to media at a final concentration of 10 µg/ml unless otherwise noted.
Strains.
C. albicans CAF2-1 (URA3/
ura3::imm434) (13), the
mating type strain, CHY247 (a1::hisG-URA3-hisG), and the a mating type strain, CHY420 (
1::hisG-URA3-hisG
2::hisG) have been described previously (30). Strains RBY731 (MTLa/MTLa) and RBY734 (MTL
/MTL
) were derived from strain CAI4 (
ura3::imm434/
ura3::imm434) (13) by growth on sorbose-containing medium for 7 days at 37°C, which selects for loss of one copy of chromosome 5, the chromosome containing the MTL locus (18, 29). Following loss of a single copy of chromosome 5, strains were grown on yeast extract-peptone-dextrose, and faster growing colonies were chosen. This step has been proposed to select for duplication of the remaining chromosome 5, resulting in homozygosis of the MTL locus (18). These strains will be referred to in this paper as a/a or
/
. A ste2/ste2 strain was constructed by the method of Wilson et al. (42) in strain CAI4. Both alleles of STE2 were deleted using a construct derived by PCR from pDDB57, and Ura- colonies were generated on medium containing 5-fluoroorotic acid. Two completely independent ste2/ste2 strains were constructed in this way. MTLa (MMY566 and MMY567) and MTL
(MMY565 and MMY568) strains were then generated from the ste2/ste2 strains by growth on sorbose-containing medium, as described above. Similarly, mf
/mf
strains were constructed using a PCR construct based on pDDB57, Ura- colonies were generated on 5-fluoroorotic acid-containing medium, and MTLa (MMY563) and MTL
(MMY563) derivatives were selected on sorbose-containing medium. Control strains for the quantitative mating assays were CHY257, CHY439, CHY477, and MMY278 (30). The mating type of all mating strains was periodically confirmed by PCR as previously described (30).
Mating assays of C. albicans. Quantitative mating analysis of C. albicans strains was performed as described previously (30). Briefly, Ade- and Ura- mating strains in the opaque phase were grown at 25°C overnight, and approximately 3 x 107 cells of each strain were mixed and deposited onto 0.8-µm-pore-size nitrocellulose filters using a Millipore 1225 vacuum sampling manifold. The filters were then grown on the surface of a yeast extract-peptone-dextrose plate containing 55 µg of adenine per ml and incubated for 6 days at 23°C. Cells were collected from the filters and plated onto Ade- Ura- media to select for conjugants and onto Ade- and Ura- plates to monitor each parent population and conjugants.
Construction of C. albicans microarray.
A C. albicans microarray containing
11,000 spots was constructed by PCR amplification of predicted ORF sequences derived from sequencing the C. albicans genome (http://www-sequence.stanford.edu/group/candida). Primer design and ORF amplification were performed in collaboration with the laboratory of Gerald Fink, Whitehead Institute, Massachusetts Institute of Technology (MIT). Successful PCR products were ethanol precipitated and printed onto glass slides as previously described (8). Printed slides were rehydrated and snap dried, and the DNA was cross-linked (8). Slides were then blocked with bovine serum albumin by incubation in a solution containing 0.5 M sodium chloride, 0.05 M sodium citrate, 0.1% sodium dodecyl sulfate, and 1% bovine serum albumin for 5 min at room temperature followed by 5 min at 42°C. Slides were rinsed and spun dry in a clinical centrifuge and used within 1 h of processing.
Preparation of cDNA for microarray experiments.
Five-milliliter cultures were grown overnight at 23°C and used to inoculate a large overnight culture (4 liters). When the optical density of the culture reached 1.0, a sample of the culture was harvested and frozen (zero time point). To the remainder of the culture, 10% DMSO or
-factor dissolved in 10% DMSO was added (final concentration, 10 µg/ml). Samples (500 ml) were taken from the
-factor- or mock-treated cultures after 20 min, 1 h, 2 h, or 4 h. The cells were collected by filtration and stored at -80°C.
Total RNA was obtained from cells using a hot phenol protocol as previously described (30). Poly(A) RNA was isolated using the Qiagen Oligotex mRNA isolation mini kit. Each cDNA pool was generated from 4 µg of poly(A) by first annealing the poly(A) RNA with oligo(dT) (10 µg) and pdN6 (10 µg). cDNA was then synthesized using Stratascript reverse transcriptase (Stratagene;100 units of reverse transcriptase) in reaction mixtures containing 0.5 mM (total) deoxynucleoside triphosphates (aminoallyl-dUTP and deoxynucleoside triphosphates [3:2]). After cDNA synthesis for 2 h at 42°C, the RNA was hydrolyzed with 0.2 N NaOH and 0.1 M EDTA. The reaction was neutralized with 0.33 M Tris (pH 7.4), and the cDNA washed several times with H2O in a Microcon-30 filter. The cDNA was recovered and dried in a speed-vac.
Coupling of cDNA and hybridization to microarrays. The cDNA was coupled with fluorescent dyes by resuspension in 0.05 M sodium bicarbonate buffer, pH 9.0, and incubation with either Cy3 or Cy5 dye (Amersham Biosciences) for 1 h at room temperature in the dark. Unincorporated dye was removed using a Qiagen PCR purification kit, and the samples were dried in a speed-vac. The samples of cDNA coupled with fluorescent dyes were resuspended in a solution containing 50% formamide, 1 M sodium chloride, 0.1 M sodium citrate, and 0.2% sodium dodecyl sulfate. The appropriate Cy3-cDNA and Cy5-cDNA samples were then mixed and heated for 3 min at 100°C before the samples were applied to the microarray slide. Samples were hybridized for 18 to 24 h at 45°C, and the slides washed, dried, and then analyzed as described below.
Analysis of microarrays. Arrays were scanned on a GenePix 4000 scanner (Axon Instruments, Foster City, Calif.), and data were quantified by using GENEPIX PRO version 3.0 and further processed by using NOMAD (http://ucsf-nomad.sourceforge.net/). Pairwise average linkage clustering analysis was performed by using the program CLUSTER and visualized by using TREEVIEW (10). Genes whose expression changed by threefold or more (in two experiments) relative to the zero time point were selected for further analysis. The Saccharomyces Genome Database (http://www.yeastgenome.org/) and the Stanford Candida database (http://sequence-www.stanford.edu/group/candida/index.html) were used to facilitate further analysis.
|
|
|---|
-factor.
We utilized conserved features of the
-factor pheromone family to devise a computer algorithm to search for putative
-factor candidates in the publicly available database of C. albicans (http://www-sequence.stanford.edu/group/candida). This search revealed one gene (ORF6.4306) with several features characteristic of the
-factor family (Fig. 1). Conceptual translation of this gene produced a hydrophobic leader sequence, consensus Kex2 protease processing sites, and three repeats of a 13-amino-acid sequence, GFRLTNFGYFEPG. These repeats were predicted to be processed into the mature pheromone (Fig. 1). This predicted processing scheme is supported by the observation that the KEX2 gene is required for mating of
cells in C. albicans (28); additional processing steps were suggested on the basis of analogy with those of S. cerevisiae and should be regarded as provisional. The overall structure of the C. albicans gene is similar to that of the S. cerevisiae MF
genes, MF
1 and MF
2 (Fig. 1), although there is no amino acid sequence similarity between the S. cerevisiae mature
-factor and the predicted C. albicans
-factor. Newport et al. (34) had previously noted that ORF6.4306 may encode an
-factor.
![]() View larger version (29K): [in a new window] |
FIG. 1. Schematic diagram of the proposed C. albicans -factor pheromone precursor. The conceptually translated protein consists of a hydrophobic leader sequence and three copies of a 13-amino-acid (aa) sequence. For comparison, the two -factor genes from S. cerevisiae are also shown. The mature S. cerevisiae -factor peptide is formed by several protein processing steps, including cleavage by the Kex2 protease (37).
|
-factor, the GFRLTNFGYFEPG tridecapeptide was synthesized in vitro and added at 10 µg/ml to C. albicans cells of the following types:
white,
opaque, a white, a opaque, and a/
white cells (a/
cells cannot form opaque cells). The construction of these strains and the isolation of white and opaque forms are described in Materials and Methods. We observed that only a opaque cells morphologically responded to the tridecapeptide: they produced long polarized projections which were easily distinguishable from pseudohyphal or other elongated cell types by the absence of a constriction at the site of polarized growth (Fig. 2). These projections, which closely resemble those observed in bona fide mating mixtures of a and
opaque cells (25, 30), were first observed after 2 h of peptide exposure (Fig. 3 and Table 1). No change in the response of any of the cell types was detected when the concentration of the peptide was increased 10-fold to 100 µg/ml: a slight decrease in the response of a opaque cells was observed at peptide concentrations of 1 µg/ml (data not shown). Because the response of C. albicans to this tridecapeptide is highly cell type specific, we will hereafter refer to it as
-factor. Additional evidence presented below verifies this initial identification.
![]() View larger version (78K): [in a new window] |
FIG. 2. Response of C. albicans cells to synthetic -factor. C. albicans a and cell types in both the white phase (A) and the opaque phase (B) were treated with 10% DMSO or -factor (10 µg/ml) dissolved in 10% DMSO. Cells were examined after 4 h of incubation at 25°C. The a and cell types were generated by gene knockouts (e.g., a1/ 1 2) or by selection on medium containing sorbose (e.g., MTL /MTL ), as described in Materials and Methods.
|
![]() View larger version (53K): [in a new window] |
FIG. 3. Time course of the response of a cells to -factor. Cells were treated with -factor (10 µg/ml) or mock treated with DMSO and incubated at 25°C. Samples were taken and analyzed for their response to -factor at 0, 1, 2, and 4 h.
|
|
View this table: [in a new window] |
TABLE 1. Response of C. albicans strains to -factora
|
-factor once they were switched to the opaque form. However, the a/a strains showed a more pronounced morphological response to
-factor than did the a/
1
2 strains (Table 1). For example, roughly 20% of the a/
1
2 strains exhibited polarized projections by 4 h, whereas 50% of the a/a strains had projections at the same time point. This difference may be due to a haploinsufficiency effect at the MTLa locus, as haploinsufficiency has been observed for many other genes in C. albicans (20, 40).
We also investigated whether the C. albicans
-factor caused cell cycle arrest, as has been observed for S. cerevisiae. To this end, we performed halo assays by spotting
-factor on filters (at concentrations of 10 mg/ml, 1 mg/ml, and 100 µg/ml) placed on lawns of a opaque cells (approximately 2,000 colonies/plate). We observed no inhibition of cell proliferation by
-factor, as judged by colony size (data not shown). However, colonies of a opaque cells exposed to
-factor had a marked wrinkled appearance, and individual cells within the colony exhibited mating projections as described above. In contrast, this same type of experiment performed with S. cerevisiae reveals pronounced areas of growth arrest (halos) around the
-factor spots. These observations suggest that C. albicans, unlike S. cerevisiae, does not undergo prolonged growth arrest in the presence of
-factor. It is, of course, possible that cell cycle arrest occurs only transiently in C. albicans, that it occurs in only a subset of the population, or that the synthetic
-factor is unstable or improperly modified.
MF
is required for
cells to mate.
We next determined whether deletion of the C. albicans
-factor structural gene (MF
) affected the mating efficiency of a and
cells. Both alleles of the MF
gene were deleted in a CAI4 strain of C. albicans, and a and
strains were isolated by selecting for loss of a homolog of chromosome 5 on medium containing sorbose. a and
Ura- white strains (either wild-type or MF
mutant strains) were switched to opaques and mated with Ade- control mating strains. From the fraction of prototrophs obtained, mating efficiency could be estimated (for details, see Materials and Methods). Deletion of the MF
gene from opaque a cells did not significantly affect the efficiency of mating of these cells (Table 2). In contrast, the mating of
cells in which the MF
gene had been deleted was drastically lower (more than a millionfold) than that of the parental strain (compare strains MMY564 and MMY563 in Table 2). The MF
gene is therefore specifically required for the mating of
cells. This analysis also indicates that C. albicans has only one gene encoding a functional
-factor, whereas S. cerevisiae has two (MF
1 and MF
2), either of which can support mating (Fig. 1).
|
View this table: [in a new window] |
TABLE 2. Mating efficiency of mf and ste2 mutants of C. albicansa
|
-factor.
In S. cerevisiae, the STE2 gene encodes the receptor for
-factor (15, 19). C. albicans has a closely related gene (also called STE2) (39), and we tested whether this gene is required for a cells to respond to
-factor. In the experiment shown in Fig. 4, wild-type a opaque cells and ste2/ste2 a opaque cells (see Materials and Methods for strain construction details) were treated with
-factor for 4 h and analyzed microscopically for morphological changes. The wild-type cells responded as described above, forming mating projections with approximately 50% of cells responding (Fig. 4B). In contrast, the a ste2/ste2 opaque cells showed no morphological response to
-factor (compare Fig. 4C and D). We note that deletion of the STE2 gene did not affect the ability of a cells to switch from the white form to the opaque form. Moreover, prior to the addition of
-factor, wild-type and ste2/ste2 a opaque cells both formed similar elliptical cells characteristic of the opaque phase (Fig. 4A and C). The STE2 gene in C. albicans is therefore not required for formation of opaque cells but is required for a opaque cells to form mating projections in response to synthetic
-factor.
![]() View larger version (73K): [in a new window] |
FIG. 4. The STE2 gene is required for the response of a cells to -factor. Opaque a cells or opaque ste2/ ste2 MTLa cells were treated with 10 µg of -factor per ml and incubated for 4 h at 25°C. The ste2/ste2 mutant showed no response to -factor.
|
cells, the mating frequency was reduced by more than a millionfold relative to the parental strain (strains MMY566, MMY565, MMY567, and MMY568 [Table 2]). In contrast, deletion of ste2 from
opaque cells did not significantly affect mating efficiency. These results show that the C. albicans STE2 gene encodes the receptor for
-factor and that this is required for mating only in a cells.
Genome-wide expression profiling of the response of C. albicans to mating pheromone.
To identify the genome-wide changes in transcription that accompany the response to
-factor, C. albicans a and
opaque strains were treated with
-factor and the transcriptional response was monitored using microarrays. The microarrays used in this analysis contained 11,325 spots representing approximately 6,550 protein-encoding nuclear genes, at least 95% of the estimated number of these genes in the C. albicans genome. For this experiment, a/a and
/
strains were generated by chromosome loss on sorbose-containing medium, and opaque cells of each mating type were isolated (see Materials and Methods for details on the isolation of forms). Two time course experiments studying the response to
-factor (10 µg/ml) were performed. In one, samples were taken at 20 min, 1 h, and 4 h, while in the second, samples were taken at 1, 2, and 4 h. Cells were also examined microscopically to confirm that the morphological changes described earlier had taken place; as expected, the a opaque cells exhibited polarized growth in response to
-factor (approximately 50% of the population), while the
opaque cells (a control for the experiment) showed no apparent morphological response.
As shown in Fig. 5, the expression of many C. albicans genes changes in both a and
cells on exposure to DMSO, the solvent used for the synthetic
-factor. However, an obvious cluster of 62 genes was induced only in a cells and only when
-factor was present in the DMSO (Fig. 5 and Table 3). Moreover, this set of genes was reproducibly induced during both time course experiments. Although a few genes were induced 1 h after pheromone addition, most show maximal induction after 2 to 4 h. In comparison, the response to
-factor in S. cerevisiae has been shown to be much more rapid, with increased expression of many pheromone-responsive genes observed after only 15 min (35). Although there are minor differences in the medium conditions used for the microarray analysis, it appears that the pheromone response occurs more slowly in C. albicans than in S. cerevisiae.
![]() View larger version (58K): [in a new window] |
FIG.5. Microarray analysis of the response of a and opaque cells to -factor. All spots on the microarray that were induced more than threefold in at least two of the time points are shown. In the first time course experiment (EXPT 1), samples were taken 20 min, 1 h, and 4 h after the addition of DMSO (lanes 2 to 4) or -factor (lanes 5 to 7) to a cells. In the second time course experiment, samples were taken at 1, 2, and 4 h after the addition of DMSO (lanes 9 to 11) or -factor (lanes 12 to 14). As an additional control, DMSO or -factor were also added to cells, and samples were taken after 4 h (lanes 16 and 17, respectively). All samples were normalized to the opaque a cells at the zero time point. The array results clustered into six sets of genes: a- and -specific genes (including the MTL genes), DMSO-induced or -repressed genes, and -factor-induced or -repressed genes. The cluster corresponding to -factor-induced genes is shown enlarged on the right. Selected genes are indicated to the right of the cluster. Note that many genes are represented by multiple spots on the array (the duplicates are not labeled).
|
|
View this table: [in a new window] |
TABLE 3. Genes whose transcription is induced more than three-fold in a opaque cells in response to -factora
|
-factor (18 of 62) encode proteins of unknown function, with no known close relatives in other organisms, including S. cerevisiae (Table 3 and Fig. 6). Another group (15 of 62) includes genes with at least one close relative but no obvious clue to specific function. As will be discussed in more detail below, the remainder of the induced genes include homologs of 18 genes involved in mating in S. cerevisiae, several genes previously implicated in the control of filamentous growth in C. albicans, and several genes previously shown to be required for virulence in C. albicans. In addition to the 62 C. albicans genes induced by
-factor, a few genes showed reproducible pheromone-induced repression, and we discuss these first.
![]() View larger version (29K): [in a new window] |
FIG. 6. Pie chart of genes induced by -factor in C. albicans opaque a cells.
|
-factor in C. albicans.
In S. cerevisiae, more than 200 genes are repressed in response to pheromone treatment (35). The large majority of these genes are shut down as part of the cell cycle arrest in G1, which precedes polarized growth and formation of mating projections. Virtually all gene repression in S. cerevisiae is mediated by the Far1 protein, a cyclin-dependent kinase inhibitor (4, 35). In contrast to S. cerevisiae, pheromone treatment of C. albicans cells resulted in lowered expression of only very few genes. In part, this may reflect the fact that only a fraction (at most 50%) of a opaque cells form projections in response to
-factor. Therefore, it might be difficult to observe gene repression that occurs only in a subset of cells. Nonetheless, several genes do show significant repression in the population as a whole, including several that function in DNA replication (MCM6, MCM7, PRI, and POL5a). The apparent lack of widespread gene repression supports the earlier observations that C. albicans does not appear to undergo whole-scale cell cycle arrest in response to
-factor. It is possible, however, that C. albicans transiently arrests DNA replication in response to
-factor.
Induction of mating genes by C. albicans
-factor.
Fifteen genes are induced in both C. albicans and S. cerevisiae by
-factor (Table 3). Among these 15 genes are genes that encode the STE2
-factor receptor and various components of the mitogen-activated protein (MAP) kinase cascade that mediate the response to
-factor in S. cerevisiae (37). Additional genes induced by
-factor in both yeasts include KAR4 and KAR5 required for karyogamy after cell fusion, SST2 and CPP1 (MSG5 in S. cerevisiae) required for pheromone adaptation, and AXL1 and HST6 (STE6 in S. cerevisiae), which are required for a-factor processing and export, respectively.
Interestingly, the RAM1 and RAM2 genes are induced (seven- and fivefold, respectively) by
-factor in C. albicans but not in S. cerevisiae. The S. cerevisiae gene products do, however, act in the mating pathway by prenylating a-factor prior to its export. Similarly, the KAR9 gene (required for karyogamy) is induced by
-factor in C. albicans but not in S. cerevisiae. Thus, even for genes likely to be involved in mating in both organisms, the precise induction pattern in response to
-factor differs between S. cerevisiae and C. albicans. Although a-factor has not yet been identified in C. albicans, the pheromone-induced transcription of AXL1, HST6, RAM1, and RAM2, in combination with the observation that HST6 mutants of C. albicans are deficient in mating (28), strongly support its existence. In all, C. albicans
-factor induces 18 genes implicated in mating, and this observation supports the idea that mating is an elaborate process in this organism involving many of the same genes described previously for S. cerevisiae.
Overlap between pheromone induction and filamentous growth.
A number of C. albicans genes required for proper regulation of the blastospore-filament transition have been identified (for reviews, see references 3, 23, 31, 33, and 41), and several of these genes were observed to be significantly up-regulated in a opaque cells by
-factor, including CPH1, CEK1, and FGR23 (Table 3). As in the case of the mating genes, this result is not surprising, as a close relationship between mating and filamentous growth has been described for S. cerevisiae. While S. cerevisiae does not exhibit true hyphal growth, diploid strains grow as pseudohyphae on medium low in nitrogen, and haploid strains undergo invasive growth on rich medium (27). It was discovered that a number of genes in the mating pheromone signaling pathway also function in the signaling pathway for pseudohyphal and invasive growth. These genes include STE20, STE11, and STE7 (components of a MAP kinase cascade) and STE12, a transcriptional regulator that is a target of this cascade. Some of these same gene products were previously shown to be involved in mating and filamentous growth in C. albicans including CST20 (the STE20 homolog), HST7 (the STE7 homolog), and CPH1 (the STE12 homolog) (5, 7, 20, 22, 24, 28, 36). Thus, a signaling pathway required for mating in C. albicans (and presumably for pheromone induction) utilizes some of the same signaling components used in filamentous growth.
In addition to the overlap of mating and filamentation signaling pathways in S. cerevisiae, there appears to be a functional overlap under certain conditions. For example, a cells of S. cerevisiae respond to low doses of
-factor by forming filaments similar to pseudohyphal cells and by growing as invasive colonies on agar plates (11, 35). This association makes intuitive sense, as both processes require the formation of polarized outgrowth. Consistent with this idea are the recent observations of Hazan and Liu (16) showing that hyphal formation in C. albicans is accompanied by a localization of Cdc42 to the cell tip, a process that requires an intact actin cytoskeleton. Actin-dependent Cdc42 localization to the cell tip is also observed during shmoo formation in S. cerevisiae (43), suggesting an important cellular and biological link between these processes. Thus, in both C. albicans and S. cerevisiae, there seems to be significant overlap between mating and filamentation. The mating and filamentation pathways presumably diverged from a common ancestral pathway but have maintained several components still shared by both. This appears to be particularly true in C. albicans, where the elongated mating projections resemble filamentous cells much more so than their S. cerevisiae counterparts. In any case, the observation that C. albicans
-factor induces transcription of genes previously implicated in the control of filamentous growth supports a large body of evidence that these two processes are closely linked.
Overlap between the pheromone response and virulence in C. albicans.
Perhaps the most surprising aspect of the response of C. albicans a opaque cells to
-factor is the induction of seven genes (HWP1, SAP4, SAP5, SAP6, ECE1, RBT1, and RBT4) encoding cell surface or secreted proteins previously shown to be required for full virulence in the mouse tail vein model for disseminated candidiasis (discussed in the introduction). Although these genes are highly induced during filamentous growth, they are not required for filamentous growth per se, as mutants with these genes deleted still form hyphae and pseudohyphae. Most of these genes do not have clear homologs in S. cerevisiae and are therefore thought to define aspects of C. albicans-host interactions (3, 23, 31, 33, 41).
HWP1 is highly induced (more than 20-fold) when a opaque cells were exposed to
-factor. This gene encodes a glycosylphosphatidylinositol (GPI)-modified cell wall protein that is strongly induced during hyphal growth and mediates attachment of C. albicans to host epithelial cells (38). Three members of the secreted aspartyl proteinase family of genes, SAP4, SAP5, and SAP6, were also induced (between 9- and 15-fold) by
-factor. (Since these three SAP genes have similar nucleotide sequences, it is difficult, due to potential cross-hybridization on the microarray, to rigorously determine each induction ratio.) The three SAP genes are differentially transcribed when hyphal growth is induced and are known to contribute to the virulence of C. albicans in the mouse model, probably by allowing C. albicans to proteolyze tissues during invasion (6, 12). Other genes induced by
-factor include two additional cell wall proteins (ECE1 and RBT1) and one secreted protein (RBT4). The functions of these latter proteins are not well understood, but all these proteins are highly induced during filamentous growth and are required for full virulence in the mouse model.
It should be noted that only a subset of C. albicans hypha-specific genes was induced by
-factor. Transcription profiling has shown that the expression of 18 genes was increased at least twofold during the transition from yeast form to hyphal cells and induced by addition of serum to the growth medium (32).
-Factor significantly increased the expression of only seven of these genes, namely, the genes discussed above (HWP1, ECE1, RBT1, RBT4, SAP4, SAP5, and SAP6). These observations indicate that the genes induced during hyphal growth and upon pheromone treatment overlap but that there are also many genes that are specific to each condition.
|
|
|---|
-factor mating pheromone in C. albicans and shown that mating-competent (i.e., opaque) a cells respond to it by forming projections characteristic of those observed in bona fide mating reactions. We also show that this response is blocked by mutation of the STE2 gene, which we identify as the
-factor receptor. The gene encoding the
-factor (MF
) is required for mating, but only by
cells; likewise, the receptor (STE2) is required for mating, but only by a cells.
Full genome transcriptional profiling of the response of a opaque cells to
-factor revealed 62 genes that were specifically induced. Eighteen genes induced by C. albicans
-factor had previously been implicated in mating in S. cerevisiae, and fifteen of these genes are also induced by S. cerevisiae
-factor. Overall, this overlap is not surprising and is consistent with the idea that C. albicans and S. cerevisiae share a conserved set of mating genes (5, 28, 39). What is perhaps unexpected is how different the sets of pheromone-induced genes are in the two organisms; with the exception of the known mating genes, the response of a cells to
-factor is highly distinctive for each organism. The largest class of pheromone-induced genes in C. albicans are ORFs with no known homologs in any other organism and ORFs with only poorly defined relatives. Clearly, much work remains in understanding mating in C. albicans. Given that many of these genes are not present in the genome of S. cerevisiae, it is possible that some of these genes function to promote mating of C. albicans in the hostile environment of a mammalian host.
Of particular interest are a set of seven C. albicans pheromone-induced genes (HWP1, ECE1, RBT1, RBT4, SAP4, SAP5, and SAP6) that encode cell surface or secreted proteins. As shown in previous work, each of these genes is required for full virulence of C. albicans in a mouse model of disseminated candidiasis (for references, see the introduction). These observations suggest that mating and virulence pathways in C. albicans share some of the same gene products to mediate cell-cell interactions. Consistent with this idea, preliminary experiments indicate that deletion of RBT1 and HWP1 in both mating partners reduced mating efficiency by a factor of approximately 20 (R. J. Bennett and A. D. Johnson, unpublished observations). (RBT1 and HWP1 are closely related proteins, and deletion of a single protein did not significantly affect mating.) It is tempting to speculate that since S. cerevisiae and C. albicans diverged from a common ancestor some 100 to 200 million years ago, structural components of the mating apparatus were adapted by C. albicans for use in interacting with its mammalian host.
|
|
|---|
-factor in a opaque cells. These are ORF6.2919 (no close homologs), ORF6.2933 (a homolog of RBT1 and HWP1), and ORF6.4306 (MF
).
We are grateful to Diane Inglis (UCSF), Joe DeRisi (UCSF), Mike Lorentz (MIT) and Gerald Fink (MIT) for the collaboration that produced the DNA microarrays used in this paper. We are also grateful to the Stanford Genome Technology Center (http://www-sequence.stanford.edu/group/candida) for providing sequence data for C. albicans. We thank David Kadosh for communicating results prior to publication, Hiten Madhani and Diane Inglis for comments on the manuscript, and Annie Tsong, Anita Sil, Burk Braun, and Bethann Hromatika for help with the microarrays.
This work was supported in part by grants from the Burroughs Wellcome Fund (993218) and NIH (R01 AI49187) to A.D.J. Sequencing of the C. albicans genome was accomplished with the support of the NIDR and the Burroughs Wellcome Fund. M.G.M. is a Howard Hughes Medical Institute Fellow.
|
|
|---|
strains. Science 289:310-313.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»