Previous Article | Next Article ![]()
Molecular and Cellular Biology, July 2006, p. 4794-4805, Vol. 26, No. 13
0270-7306/06/$08.00+0 doi:10.1128/MCB.02053-05
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Department of Biological Chemistry, University of California-Irvine, Irvine, California 92697-1700
Received 21 October 2005/ Returned for modification 5 December 2005/ Accepted 4 April 2006
|
|
|---|
|
|
|---|
Ste12 is regulated by the Fus3 and Kss1 mitogen-activated protein (MAP) kinases (2, 41). Fus3 and Kss1 have overlapping functions in mating (12, 39). Both Fus3 and Kss1 can phosphorylate Dig1 and Dig2, two functionally redundant inhibitors of Ste12 (9, 43). Dig1 binds to the middle region of Ste12 that is responsible for transcriptional induction in response to pheromone, whereas Dig2 binds to the N-terminal region of Ste12 (34). During pheromone induction, the inhibition of Dig1 and Dig2 is relieved, leading to the activation of Ste12 (3, 9, 34, 35, 43). Fus3 and Kss1 play opposing roles on filamentation. Kss1 kinase activity is necessary for filamentation, while Fus3 kinase activity is inhibitory to filamentation (3, 10, 29). During the pheromone response, Fus3, but not Kss1, specifically phosphorylates Tec1 and triggers ubiquitin-mediated Tec1 degradation, preventing the induction of filamentation genes (1, 7, 8).
Although Ste12 is bound to the promoters of filamentation genes (47), we find that promoters of most filamentation genes do not contain FREs, but they all contain TCS. A genetic study by Kohler et al. suggests that Tec1 can regulate the expression of filamentation genes by TCS control when overexpressed (24). Similar to FREs, TCS-driven expression is inhibited by active Fus3 and activated by Kss1 (7, 8). Here, we show that Ste12 forms two distinct complexes, the known Ste12/Dig1/Dig2 complex for mating and also a novel Tec1/Ste12/Dig1 complex that regulates the expression of filamentation genes through TCS. Tec1 by itself does not have significant transcriptional activity, but it tethers Ste12 transcriptional activity to the TCS site to allow the activation of filamentation genes. Our work demonstrates a mechanism for how Ste12 can control transcriptional programs of distinct pathways by its association with different cofactors.
|
|
|---|
1278b background unless otherwise specified. Strain HLY2187 was obtained from a cross between strains 10560-6B and L6149. dig1::TRP1, dig2::TRP1, and dig2::KANR were introduced into yeast according to Longtine et al. (28). TRP1 or KANR cassettes were amplified by PCR from plasmid pFA6a-TRP1 or pFA6a-KanMX6 with a pair of primers that included 50 bp upstream and downstream of the DIG1 or DIG2 open reading frame (ORF) and integrated into the genome by homologous recombination. ste12::LEU2 was created by transforming plasmid pSUL16 digested with SacI and SphI (13). The tec1::KANR deletion was introduced by transformation of the PCR product amplified with primers upstream and downstream of the TEC1 ORF from the genomic DNA of a tec1::KAN strain from the S. cerevisiae gene deletion MATa set (Invitrogen). |
View this table: [in a new window] |
TABLE 1. S. cerevisiae strains used in this study
|
Plasmid construction. The TCS-lacZ plasmid (pHL710) was constructed by inserting the sequence AGAATGTGCATTATCGATTCATTCT into the Xho1 site in the pLG669Z plasmid (17).
To construct plasmids pHL711 (ADH1p-lexA-TEC1 HIS3) and pHL712 (ADH1p-lexA-STE12 HIS3), STE12 and TEC1 ORFs were amplified by PCR and inserted into the yeast vector pEG202 (16) between the EcoRI and XhoI sites.
To construct plasmid pHL731 (ADH1p-TEC1-HA3 TRP1), a 1.5-kb ADH1 promoter region was amplified by PCR and inserted into the yeast expression vector pRS314 (40) between the NotI and EcoRI sites to generate pRS314/ADH1p. Then a Tec1-3HA cassette with an ADH1 terminator sequence was PCR amplified from the epitope-tagged Tec1-HA strain HLY3324 and cloned into the plasmid pRS314/ADH1p between the EcoRI and XhoI sites. To construct pHL732 (ADH1p-TEC1-myc13 TRP1), a Tec1-myc13 cassette with the ADH1 terminator sequence was PCR amplified from the strain HLY3324 and cloned into the plasmid pRS314/ADH1p between the EcoRI and XhoI sites.
For plasmid pHL754 (ADH1p-STE12(1-215)-myc13 HIS3), the Tec1 ORF region of pHL732 was replaced with an STE12(1-215) fragment (STE12 with residues 1 to 215) amplified by PCR. And the ADH1p-Ste12(1-215)-myc13 module was cloned into the plasmid pRS313.
N-terminal and C-terminal Tec1 deletion fusions with HA3 were cloned into pHL731 by replacing the TEC1 coding region of pHL731 with PCR-amplified fragments of TEC1, digested with EcoRI and BamHI. The same TEC1 fragments, flanked with EcoRI and XhoI and followed by a stop codon, were amplified and cloned into the vector pEG202 for transcriptional activity assays. High-fidelity Pfx DNA polymerase (Invitrogen) was used in all PCR amplifications that were used for cloning in this study, and clones used in this study were confirmed by sequencing.
Immunoprecipitation. Cell cultures (50 ml) were grown to an optical density at 600 nm (OD600) of about 1.0, and cells were washed twice with ice-cold water and then broken with FastPrep (Eppendorf) for 40 s twice in 0.7 ml of high-salt breaking buffer (20 mM Tris-HCl, 300 mM NaCl, 0.1% NP-40, 1m M EDTA) plus protease inhibitors (0.5 mM phenylmethylsulfonyl fluoride [PMSF], 2 mM benzamidine, 1 µM leupeptin, 2 µM pepstatin, 4 µM chymostatin, 2.6 µM aprotinin). After a 10-min spin in a microcentrifuge, the lysates were incubated with 1.5 µg of anti-HA antibody (clone 12C5; Roche) at 4°C for 1.5 h, and subsequently 50 µl of a 1:1 slurry of protein A-Sepharose beads was added and incubated for another 1.5 h at 4°C. Bound proteins were washed five times with breaking buffer and eluted with 1% sodium dodecyl sulfate (SDS) in Tris-EDTA buffer, pH 8.0.
In vitro transcription/translation and in vitro binding. Plasmids used for in vitro transcription/translation were constructed by PCR amplification of TEC1, STE12, DIG1, and DIG2 with EcoRI and XhoI on each end and cloned in frame into the EcoRI and XhoI sites of the plasmid pCITE4b(+) (Novagen). Tec1-FLAG was constructed by adding a FLAG sequence in frame to the C terminus of Tec1 in a PCR primer for cloning into the pCITE4b(+) vector. mRNA was transcribed from plasmid DNA for 20 min and subsequently translated for 90 min with the STP3 T7 Single Tube Transcription/Translation System (Novagen). For myc-Ste12, mRNA was transcribed from plasmid pGEM4Z-meSTE12 (3) using the STP3 SP6 Transcription Mix (Novagen). In vitro translated proteins were incubated in IPP150 binding buffer containing 50 mM Tris-HCl (pH 7.5), 150 mM NaCl, 0.1% Triton X-100, and 1 mM PMSF with rotation at 4°C for 1 h. The proteins were immunoprecipitated with either anti-FLAG M2-agarose (Sigma) or a 1:100 dilution of anti c-myc (A-14) rabbit polyclonal immunoglobulin G (Santa Cruz Biotechnology) with protein A-Sepharose CL-4B (Amersham Biosciences) overnight at 4°C with rotation. The beads were then washed five times with IPP150 binding buffer before being boiled for 5 min in 5x SDS sample buffer. The proteins were resolved on 9% SDS-polyacrylamide gels, fixed, dried, and detected with a phosphorimage cassette.
ß-Galactosidase assay. ß-Galactosidase assays were performed as previously described (37) but with the addition of protease inhibitors in the cell-breaking buffer (0.1 M Tris, pH 8.0, 20% glycerol, 0.5 mM PMSF, 2 mM benzamidine, 1 µM leupeptin, 2 µM pepstatin, 4 µM chymostatin, 2.6 µM aprotinin). The following calculation was used: ß-galactosidase activity = OD420 x (1.7/0.0045) x 1,000/time x volume x concentration, where time is measured in minutes, volume is in microliters, and concentration is in micrograms/microliter.
Comparative promoter analysis of Tec1 and Ste12 sites. Ste12- and/or Tec1-regulated genes were obtained from two microarray experiments of dig1 dig2 versus wild type (21), available at http://www.rii.com/publications/2000/cell_hughes.htm. Only genes whose expression levels in dig1 dig2 were at least twofold higher than wild type in both experiments were used in our analysis. Ty genes or genes whose promoters overlap with a Ty element were also excluded. Sequences of promoters 1,000 bp upstream of the selected Ste12-regulated genes in S. cerevisiae were extracted from the yeast genome database (http://www.yeastgenome.org/). Their coding sequences were blasted with the genome sequences of three other Saccharomyces species (http://www.broad.mit.edu/annotation/fungi/compyeasts/) to identify their orthologs and obtain 1,000-bp upstream regions of these orthologs. Promoter sequences from different Saccharomyces species were used to search for Ste12 (TGAAACR) and Tec1 (CATTCY) consensus sequences, and maps of potential sites were created using the regulatory sequence analysis tools website at http://rsat.ulb.ac.be/rsat/ (results are compiled in the figures in the supplemental material).
ChIP assay. Chromatin immunoprecipitation (ChIP) analysis was performed as previously described (22, 42). The same set of protease inhibitors as described previously for immunoprecipitation was added to the ChIP lysis buffer. Two micrograms of anti-myc antibody (Santa Cruz) was incubated with the cell extract from 50 ml of cells grown to an OD600 of 1.0. PCR primiers used in the ChIP analysis are listed in Table 2.
|
View this table: [in a new window] |
TABLE 2. Primers used in ChIP assays
|
|
|
|---|
|
View this table: [in a new window] |
TABLE 3. Comparative promoter analysis for conserved Ste12 and Tec1 binding sites in four closely related Saccharomyces speciesa
|
Our promoter analysis is in agreement with transcription patterns of these genes. Fus3 plays a positive role in the transcriptional activation of Ste12, whereas it specifically phosphorylates Tec1 and triggers ubiquitin-mediated Tec1 degradation during the pheromone response (1, 7, 8). Therefore, transcription of TCS-driven genes in a fus3 mutant is expected to be higher than that in wild type, while PRE-driven transcription in fus3 mutants should not be higher than that in wild type during the pheromone response. Ratios of gene expression in fus3 mutants treated with 50 nM
-factor versus wild type treated with 50 nM
-factor have been determined by Hughes et al. (21) and are listed in Table 3. As expected, all genes with only PREs have a ratio of
1.0, and genes with only TCS unanimously have a ratio of >1.0 (Table 3). The ratios also correlate well with the functional assignments for genes with both PREs and TCS (Table 3, right column).
Tec1 is in a complex with Ste12 and Dig1, which is distinct from the complex of Ste12 with Dig1 and Dig2. Since Ste12 can regulate filamentation genes without binding to PREs, there must be an alternative way for Ste12 to associate with the promoters. One likely model for Ste12 to control TCS-driven transcription is by direct association of Ste12 with Tec1. Ste12 is suspected to interact with Tec1 because Tec1 and Ste12 can bind cooperatively to FREs both in vitro and in vivo (5, 29), although it has not been shown whether the two proteins can interact in the absence of their binding to adjacent cis elements on DNA. The only report of Ste12 association with Tec1 independent of cis elements was from a systematic identification of protein complexes by mass spectrometry in cells that overexpressed TEC1-FLAG from the GAL1 promoter (20). To further investigate whether Tec1 interacts with Ste12 and Ste12-associated proteins Dig1 and Dig2, we tagged these proteins at their C termini with either HA3 or myc13 on chromosomes. The tagged proteins were expressed from their own promoters and were functional (data not shown). Fractionation experiments with epitope-tagged Ste12 showed that over 90% of Ste12 was in the pellet fraction with DNA after an ultracentrifugation when 150 mM NaCl was used for protein extraction, whereas Ste12 was effectively extracted when 300 mM NaCl was used (data not shown). Therefore, 300 mM NaCl was used in all of our in vivo immunoprecipitation experiments in this study. Immunoprecipitation of Tec1-HA with an anti-HA antibody was able to bring down similar amounts of Dig1-myc and Ste12-myc (Fig. 1A), despite the fact that Dig1 was more abundant than Ste12 in the whole-cell lysate. The interaction was specific, as immunoprecipitation of the cell extracts of untagged strains did not pull down any myc-tagged proteins. Reciprocal immunoprecipitation of Dig1 or Ste12 also detected Tec1 (data not shown). In contrast to Dig1 and Ste12, immunoprecipitation of Tec1-HA did not bring down a substantial amount of Dig2 (Fig. 1A, lane 3). Repeating the Tec1 immunoprecipitation showed that Tec1 consistently pulled down Dig1 and Ste12, but the Dig2 signal in the Tec1 immunoprecipitation (IP) was sometimes weak and sometimes undetectable. As Dig1 is more abundant than Dig2 in whole-cell lysate, one may argue that the lack of detectable Dig2 in the Tec1 IP could be caused by the difference in protein abundance. But this is unlikely because immunoprecipitation of Dig2-HA specifically brought down Ste12-myc, as previously reported (43), as well as Dig1-myc (Fig. 1B), but the amount of Tec1 in the Dig2 IP was barely detectable, despite the fact that similar levels of Ste12 and Tec1 were in the cell lysate (Fig. 1). Therefore, Tec1 and Dig2 are likely in two different complexes with Ste12 and Dig1. The Ste12/Dig1/Dig2 complex is the known Ste12 complex for the mating program (34), while the newly identified Tec1/Ste12/Dig1 complex is likely for the filamentation program.
![]() View larger version (40K): [in a new window] |
FIG. 1. Tec1 forms a complex with Ste12 and Dig1 but not with Dig2. (A) Immunoprecipitation of Tec1-HA. Protein lysates were subjected to immunoprecipitation with an anti-HA antibody, and the precipitation products were resolved by SDS-polyacrylamide gel electrophoresis and probed with an anti-myc antibody. As controls, cell lysates were subjected to Western blotting with anti-myc and anti-HA antibodies. The following yeast strains were used: lane 1, HLY3334 (TEC1-HA STE12-myc); lane 2, HLY3335 (TEC1-HA DIG1-myc); lane 3, HLY3336 (TEC1-HA DIG2-myc); lane 4, HLY3320 (TEC1-myc); lane 5, HLY3321 (STE12-myc); lane 6, HLY3322 (DIG1-myc); and lane 7, HLY3323 (DIG2-myc). The lower band in lane 2 is a breakdown product of Dig1-myc. (B) Immunoprecipitation of Dig2-HA, as in panel A. The yeast strains in each lane are as follows: lane 1, HLY3337 (DIG2-HA STE12-myc); lane 2, HLY3338 (DIG2-HA DIG1-myc); lane 3, HLY3339 (DIG2-HA TEC1-myc); lane 4, HLY3327 (DIG2-HA); lane 5, HLY3321 (STE12-myc); lane 6, HLY3322 (DIG1-myc); and lane 7, HLY3324 (TEC1-HA). The lower bands in lanes 2 and 6 are a breakdown product of Dig1-myc. (C) Tec1 binds to the N-terminal region of Ste12. The yeast strain HLY3350 (ste12 tec1) carrying plasmid pHL754 (ADH1p-Ste12(1-215)-myc) was transformed with either pHL731 (ADH1p-TEC1-HA) or a vector (pRS313), and the transformed strains were used in immunoprecipitation with an anti-HA antibody. The precipitated proteins were analyzed by Western blotting with an anti-myc antibody. IB, immunoblot.
|
![]() View larger version (26K): [in a new window] |
FIG. 2. Differential regulation of Ste12 and Tec1 transcriptional activities by Dig1 and Dig2. Relative ß-galactosidase activities of PRE(FUS1)-lacZ, FRE(Ty1)-lacZ, and TCS-lacZ (pHL710) in wild-type (10560-4A), dig1 (HLY3315), dig2 (HLY3316), and dig1 dig2 (HLY3317) strains and relative ß-galactosidase activities of LexA-Tec1 (pHL711) and LexA-Ste12 (pHL712) in lexAops-lacZ-integrated wild-type (HLY3328), dig1 (HLY3329), dig2 (HLY3330), and dig1 dig2 (HLY3331) strains are shown. The activity for each strain was an average from three independent transformants, and the relative activity was calculated by dividing activity by that of the dig1 dig2 strain for each reporter.
|
45-fold in the dig1 mutant (Fig. 1). In contrast to LexA-Tec1, LexA-Ste12 activity was high only in the dig1 dig2 double mutant and not in the dig1 single mutant, as previously reported (34). Therefore, Dig1 is the major inhibitor of Tec1 activity. Since PRE-lacZ expression or LexA-Ste12 activity was similar in dig1 and dig2 single mutants, the observed difference in TCS-lacZ expression or LexA-Tec1 activity between dig1 and dig2 strains is unlikely due to the difference in Dig1 and Dig2 protein abundance but could be explained by the protein composition in the Tec1/Ste12/Dig1 and Ste12/Dig1/Dig2 complexes. Tec1 binds to the same region of Ste12 as Dig2. Since the two Ste12 complexes differ in Tec1 and Dig2, a possible mechanism that could give two distinct Ste12 complexes is one whereby Tec1 and Dig2 bind to the same region on Ste12 in a mutually exclusive way. Dig2 is known to bind to the N-terminal DNA binding region of Ste12 (34). We found that Tec1 also associated with the N-terminal region of Ste12 by immunoprecipitation (Fig. 1C). A myc-tagged N-terminal fragment of Ste12(1-215) in an ste12 mutant was used for IP to avoid the potential interaction of the Ste12 N terminus with full-length Ste12. Because Ste12(1-215) is not sufficient for the expression of Ste12-regulated genes, HA-tagged Tec1 was expressed from the ADH1 promoter. The N-terminal DNA binding region (residues 1 to 215) of Ste12 is sufficient for interaction with Tec1; other regions of Ste12 were not required for the interaction with Tec1, as immunoprecipitation of Ste12 with deletions between residues 253 to 355, 387 to 512, and 512 to 669 could still pull down Tec1 (data not shown).
Dig1 interaction with Tec1 requires Ste12. Because Dig1 can bind Ste12 and inhibit Ste12 activity (9, 43) and because Ste12 is a component of the Tec1 immunocomplex, it is possible that the interaction of Dig1 with Tec1 is not direct but is mediated through Ste12. To test this possibility, we examined whether Dig1 and Tec1 still interact in the absence of Ste12. Because TEC1 expression is Ste12 dependent, we placed TEC1-HA under the control of the ADH1 promoter. Dig1-myc was detected in the Tec1-HA immunoprecipitation in wild type but not in an ste12 mutant (Fig. 3A). Therefore, Ste12 is required for Tec1 interaction with Dig1.
![]() View larger version (28K): [in a new window] |
FIG. 3. Ste12 interaction with Tec1 is essential for the transcriptional activation of Tec1. (A) The Dig1 and Tec1 interaction is Ste12 dependent. Yeast strains HLY3335 (Tec1-HA Dig1-myc) and HLY3343 (Tec1-HA Dig1-myc ste12) with TEC1 under its endogenous promoter and strains HLY3322 (Dig1-myc) and HLY3342 (Dig1-myc ste12) bearing the plasmid pHL731 (ADH1p-Tec1-HA) were used for immunoprecipitation with an anti-HA antibody. The lysates and IP products were analyzed on Western blots with an anti-myc antibody. (B) Dig1 inhibition of LexA-Tec1 activity is Ste12 dependent. ß-Galactosidase assays of LexA-Tec1 (ADH1p-lexA-TEC1) in strains HLY3328 (wild type; lexAops-lacZ), HLY3329 (dig1 lexAops-lacZ), HLY3332 (ste12 lexAops-lacZ), and HLY3333 (dig1 ste12 lexAops-lacZ). (C) Ste12 interacts with a Tec1 C-terminal region. Yeast strain HLY3321 (STE12-myc) carrying plasmids expressing various fragments of Tec1-HA or pRS314 (vector) were grown to mid-log phase and subjected to immunoprecipitation with an anti-HA antibody. N- and C-terminal residues of each remaining Tec1 fragment are indicated. (D) ß-Galactosidase assays of the LexA-Tec1 fragments in the yeast strains HLY3328 (wild type; lexAops-lacZ) and HLY3329 (dig1 lexAops-lacZ). IB, immunoblot.
|
Stoichiometry of Ste12 interaction with Tec1, Dig1, and Dig2 in vitro. To further characterize the interaction between Tec1 and Ste12, we generated Tec1-FLAG and Ste12 by in vitro transcription/translation and examined whether Tec1-FLAG could interact with Ste12 in vitro. As shown in Fig. 4A, lane 4, IP with an anti-FLAG antibody brought down similar levels of 35S-labeled Tec1-FLAG and Ste12. Reciprocally, IP of 35S-labeled myc-Ste12 also brought down 35S-Tec1 at the molar ratio of about 1 Ste12 to 1.3 Tec1 (Fig. 4D, lane 8).
![]() View larger version (34K): [in a new window] |
FIG. 4. Formation of distinct Ste12 complexes in vitro. (A) Tec1 binds to Ste12 with an equal molar ratio. One microliter of in vitro translated and 35S-labeled Tec1-FLAG or Ste12 was loaded as input. A total of 15 µl of each was used for immunoprecipitation with anti-FLAG M2-agarose (Sigma). (B) Tec1 does not bind Dig1 or Dig2 directly. Dig1 association with Tec1-Ste12 is mediated through Ste12. Either 1 µl or 15 µl of in vitro translated product was used as input or in IP for each protein as described in panel A. (C) Tec1-Ste12 complex does not bind Dig2. Limited Dig2 is tethered to the complex through Dig1. Both 1 µl and 15 µl of in vitro translated product were used as input or in IP for each protein as described in panel A. (D) myc-Ste12 association with Tec1, Dig1, and Dig2. Either 2 µl or 30 µl of in vitro translated myc-Ste12 was loaded as input or used in IP with c-myc rabbit polyclonal immunoglobulin G(Santa Cruz Biotechnology) and protein A-Sepharose CL-4B (Amersham Biosciences). For other proteins, 1 µl or 15 µl of in vitro translated product was used as input or in IP. The percent adjusted intensity/number of methionines relative to Ste12 has been calculated for lanes 8 to 11.
|
In contrast to Dig1, Dig2 was not detected in the Tec1-FLAG immunoprecipitation even in the presence of Ste12 (Fig. 4B, lane 11). Interestingly, when both Ste12 and Dig1 were present, Tec1-FLAG could bring down a small, but detectable amount of Dig2 (Fig. 4B, lane 12 as indicated by the arrow). Because 35S-Ste12 IP also produced a faint band at the same position as Dig2 (Fig. 4B, lanes 7, 10, and 11), we repeated the Tec1-FLAG IP experiment with unlabeled Ste12 (Fig. 4C). IP of Tec1-FLAG in the presence of Ste12 could bring down Dig1 (lane 7) but not Dig2 (lane 5). In the presence of both Ste12 and Dig1, Tec1-FLAG could bring down a small amount of Dig2 (Fig. 4C, lane 6). Therefore, a small amount of Dig2 is tethered to the Tec1/Ste12/Dig1 complex through its association with Dig1.
We also investigated the ability of Ste12 to interact with Dig1 and Dig2 by using a myc-tagged Ste12 for IP (3). As shown by Bardwell et al., a small amount of Dig1 bound to myc-Ste12 (Fig. 4D, lane 9). The molar ratio of this binding is about 1 Ste12 to 0.3 Dig1. The amount of Dig2 in the myc-Ste12 IP was also very small, at about 1 Ste12 to 0.2 Dig2 (Fig. 4D, lane 10). Surprisingly, in the presence of both Dig1 and Dig2, the amount of Dig1 and Dig2 associated with myc-Ste12 reached a molar ratio of 1.4 Dig1 and 1.5 Dig2 to 1 Ste12 (Fig. 4D, lane 11). Therefore, there is synergy between Dig1 and Dig2 in binding to myc-Ste12 in vitro. Identical results, both in terms of low levels of binding with Dig1 or Dig2 and the synergy between them, were observed with an Ste12-myc in which we fused myc13 to the C terminus of Ste12 (data not shown).
Ste12-associated Dig2 can be competed off by Tec1. Because both Tec1 and Dig2 bind to the N-terminal region of Ste12 (Fig. 1C), we reasoned that they might bind to Ste12 in a competitive and, therefore, mutually exclusive manner to generate two distinct Ste12 complexes. To determine whether Tec1 can compete with Dig2 for binding to Ste12, an increasing amount of Tec1 was added to IP reaction mixtures that contained an equal amount of myc-Ste12 and 35S-labeled Dig1 and Dig2. Decreasing levels of Dig2 and Dig1 were found to be associated with myc-Ste12 in the presence of an increasing amount of Tec1 (Fig. 5A). This suggests that excess Tec1 could compete off Dig2 from Ste12. Interestingly, a significant amount of Dig1 also fell off with Dig2 from the Ste12 complex in the presence of a large excess of Tec1 (Fig. 5A, lane 8 and 9), consistent with the observed synergistic interaction of Dig1 and Dig2 with Ste12. When we carried out the Tec1 competition experiment with myc-Ste12 and Dig1, the Ste12-bound Dig1 level did not change with an increasing amount of Tec1 (data not shown). When an increasing amount of Tec1 was added to myc-Ste12 and Dig2, Ste12-bound Dig2 decreased; however, the initial amount of Ste12-bound Dig2 was very small (data not shown).
![]() View larger version (25K): [in a new window] |
FIG. 5. Tec1 competes with Dig2 for Ste12 binding both in vitro and in vivo. (A) Tec1 can compete off Dig2 from Ste12. Twenty microliters of myc-Ste12 and 10 µl of in vitro translated and 35S-labeled Dig1 and Dig2 were used in each immunoprecipitation as described in the legend of Fig. 4D, and 1 µl of Dig1 or Dig2 was loaded as input. Unlabeled in vitro translated Tec1 was added to each IP in increasing amounts: 0 µl, 5 µl, 10 µl, 20 µl, 50 µl, and 100 µl. (B) Dig2 cannot compete off Tec1 from Ste12. Twenty microliters of myc-Ste12 and 10 µl of 35S-labeled Tec1 were used in each IP as described in the legend of Fig. 4D, and 1 µl of Tec1 was loaded as input. Increasing amounts (0 µl, 5 µl, 10 µl, 20 µl, 50 µl, and 100 µl) of both Dig2 and Dig1 were added to each IP for competition. (C) Tec1 competes with Dig2 for Ste12 binding in vivo. Strain HLY3340 (STE12-HA DIG2-myc tec1) carrying either a GAL-TEC1 (27c-2A) (33) or a vector was grown in YEPD until log phase; cells were washed several times with water and resuspended into YEP +2% raffinose to grow overnight. Galactose (2%) was added, and cells were grown for an additional 4.5 h before harvest for IP with an anti-HA antibody. The lysate and IP eluate were blotted with either anti-HA (anti-Ste12) or anti-myc (anti-Dig2) antibodies. IB, immunoblot.
|
We further tested the ability of Tec1 to compete with Dig2 for Ste12 binding in vivo by an Ste12 IP in cells with and without overexpression of TEC1. When overexpressed from the GAL1 promoter, Tec1 significantly reduced the amount of Dig2 that was associated with Ste12 in yeast cells (Fig. 5C). Thus, our data show that Tec1 competes with Dig2 in binding with Ste12 both in vivo and in vitro.
The Tec1/Ste12/Dig1 complex binds to TCS of filamentation genes and PREs of mating genes. If filamentation genes are regulated by the Tec1/Ste12/Dig1 complex via the TCS and mating genes are regulated by the Ste12/Dig1/Dig2 complex via the PRE, we would expect to find Dig2 at the promoters of mating genes and Tec1 at those of filamentation genes. Ste12 and Dig1 should be present at the promoters of both groups. A study of the genome-wide location of Ste12, Dig1, and Tec1 has shown that Ste12 and Dig1 are present at both mating and filamentation genes, and Tec1 is present at filamentation genes as well as at some of the mating genes (47). The localization of Dig2 in these genes is not known. Therefore, we compared the distribution of Tec1 and Dig2 at the promoters of mating and filamentation genes using ChIP analysis. Ste12 and Dig1 were included as controls. STE12-myc, TEC1-myc, DIG1-myc, and DIG2-myc strains were grown in YEPD (yeast extract, peptone, and dextrose) medium and harvested for ChIP analysis. The immunoprecipitated DNA was analyzed by PCR using primer pairs that are located about 100 bp upstream and downstream of either the TCS elements of filamentation genes or PRE elements of mating genes. Because we wanted to determine the differences between Ste12 complexes at PREs and at TCS, promoters containing both PRE and TCS sites were excluded from the analysis. In addition, only promoters that were efficiently bound by Ste12 and Tec1 in the whole-genome ChIP experiment were used (47). Ste12, Tec1, and Dig1 were present in nearly equal amounts at the TCS of filamentation genes, whereas Dig2 was detected at a lower level (Fig. 6A). Since our in vitro binding experiments have shown that Tec1, Ste12, and Dig1 were present at a near equal ratio in the Tec1/Ste12 complex and that limited Dig2 was bound to the complex through the association with Dig1, the relative amounts of the four proteins detected at the filamentation genes are consistent with the localization of the Tec1/Ste12/Dig1 complex to the filamentation genes.
![]() View larger version (26K): [in a new window] |
FIG. 6. Distribution and function of the Tec1/Ste12/Dig1 complex at TCS sites of filamentation genes and PREs of mating genes (A) Yeast strains HLY3320 (TEC1-myc), HLY3321 (STE12-myc), HLY3322 (DIG1-myc), HLY3323 (DIG2-myc), and 10560-4A (wild type) were grown to mid-log phase in YEPD for ChIP with an anti-myc antibody. The input and ChIP products were amplified by PCR with promoter-specific primers (sequences are listed in Table 2) and resolved on an agarose gel. Promoters of VPS75 and TRA1 were used as negative controls. (B) Yeast strains HLY3323 (DIG2-myc) and HLY3405 (DIG2-myc dig1) were grown to log phase and subjected to ChIP analysis with an anti-myc antibody. (C) ß-Galactosidase assays of PRE(FUS1)-lacZ (29) in yeast strains 10560-4A (wild type), HLY3315 (dig1), HLY3316 (dig2), HLY3317 (dig1 dig2), HLY2187 (tec1), HLY3318 (dig1 tec1), and HLY3319 (dig2 tec1). WT, wild type.
|
PCR of selected mating genes from the above ChIPs shows that Tec1 was present, but at a much lower level than Ste12, Dig1, and Dig2, at the promoters of mating genes (Fig. 6A). Because Tec1 is only present in the Tec1/Ste12/Dig1 complex, the detection of the small amount of Tec1 at the mating genes suggested that there was some Tec1/Ste12/Dig1 complex at the promoters of mating genes via Ste12 binding to PREs. We suggest that both types of Ste12 complexes are present at the promoters of mating genes. The Ste12/Dig1/Dig2 complex is the major form, while the Tec1/Ste12/Dig1 complex is the minor form.
The biological significance for the presence of the Tec1/Ste12/Dig1 complex at the PREs of mating genes is not clear. But we did find that the PRE(FUS1)-lacZ expression level was slightly elevated in tec1 and was even higher in a tec1 dig1 double mutant (Fig. 6C). The synergistic effect between tec1 and dig1 was specific, as PRE(FUS1)-lacZ expression was not increased in a tec1 dig2 mutant, suggesting that Tec1 might function together with Dig1 in inhibiting Ste12 activity at the promoters of mating genes.
|
|
|---|
![]() View larger version (14K): [in a new window] |
FIG. 7. Proposed regulation of mating and filamentation genes by Ste12/Dig1/Dig2 and Tec1/Ste12/Dig1 complexes in S. cerevisiae. Ste12 forms two distinct transcriptional complexes: Ste12/Dig1/Dig2 at the PREs of mating genes and Tec1/Ste12/Dig1 at the TCS of filamentation genes. A small amount of Tec1/Ste12/Dig1 is also present at the PREs of mating genes. The expression of filamentation genes is regulated by Tec1-associated Ste12 on TCS, which is inhibited by Dig1. A smaller amount of Dig2 is associated with the Tec1 complex through Dig1; thus, Dig2 does not regulate Ste12 activity.
|
The Tec1/Ste12/Dig1 complex regulates TCS-driven transcription. We show that TCS-driven transcription is regulated by the Tec1/Ste12/Dig1 complex. Tec1 by itself has minimal transcriptional activity. Its activity is determined by the associated Ste12 because Tec1 transcriptional activity is low in ste12 mutants, and STE12 deletion abolishes all elevated Tec1 activity in a dig1 mutant. This result is different from the reported Ste12-independent transcriptional activity of Tec1 in TCS control (24). The Ste12-independent activity of Tec1 appears to be significant only when Tec1 is highly overproduced (24), whereas we showed Ste12-dependent Tec1 transcriptional activity and TCS transcription under normal circumstances and in a dig1 strain. The Ste12-independent activation of Tec1 could be mediated through the C terminus (residues 401 to 486) of Tec1, as we found the region is not essential for Ste12 interaction but is required for Tec1 transcriptional activity. In the Tec1/Ste12/Dig1 complex, the main function of Tec1 is to associate with Ste12 through its C-terminal region to bring Ste12 and its transcriptional activity to TCS sites. Removal of the Tec1 interaction domain with Ste12 abolishes its transcriptional activity. The same C-terminal domain of Tec1 is termed the TCS-control region by Kohler et al. (24). We suggest that Ste12 acts as the transcriptional activator in the Tec1/Ste12/Dig1 complex and, thus, places the TCS control under the filamentation MAP kinase pathway. Active Kss1 removes Dig1 inhibition on Ste12 and allows transcription from a TCS. In fact, Fus3 and Kss1 have an equal and exchangeable role in activating transcription from TCS, as revealed by a stable Tec1 mutant in kss1 and fus3 (8), which is also consistent with the finding that both Fus3 and Kss1 are able to phosphorylate Dig1 (9, 43).
A limited amount of Dig2 is present in the Tec1/Ste12/Dig1 complex via interaction with Dig1, based on our in vitro IP (Fig. 4D) and ChIP analysis of Dig2 in dig1 cells (Fig. 6B). The lack of direct Dig2 interaction on Ste12 in the Tec1/Ste12/Dig1 complex may explain the difference in basal transcription levels of mating and filamentation genes, as filamentation genes are moderately expressed in vegetative growing cells, whereas mating genes are more stringently regulated with very low levels of basal expression. It also explains why Dig1 is the major inhibitor for the expression of filamentation genes, while Dig2 has minimal effects (6).
Transcriptional regulation of most filamentation genes is through TCS. The transcription of filamentation genes is thought to be regulated by cooperative interaction of Ste12 and Tec1 via the FRE cis elements (29). However, most filamentation genes do not have FREs in their promoters (Table 3). Many filamentation genes do not even have a PRE; rather, they all have TCS. Since a single TCS is sufficient to provide the expression pattern of filamentation genes (24), most filamentation genes are likely regulated through TCS by the Tec1/Ste12/Dig1 complex. In support of this, we show by ChIP assay that Tec1, Ste12, and Dig1 are present at the promoters of filamentation genes, while Dig2 is detected at a lower level, and the binding is Dig1 dependent. Our model of the Tec1/Ste12/Dig1 complex binding to TCS elements gives an alternative and more general explanation for why the binding of Ste12 to filamentation genes is Tec1 dependent (47).
Ste12 controls diverse transcriptional programs by association with different cofactors that are differentially regulated at the transcription and protein stability levels.
The regulation of Ste12-mediated transcriptional programs provides a prime example for us to understand how a transcription factor selectively activates distinct developmental programs in response to different stimuli. In the case of Ste12, it controls different transcriptional programs by selective partnership with different cofactors. We show that Tec1 brings Ste12 to TCS elements to activate filamentation genes. This mechanism is similar to the regulation of
-specific genes, where Ste12 is brought by
1 to the promoters of
-specific genes (46). Ste12 activation by the pheromone-responsive MAP kinase pathway is responsible for the induction of a-specific,
-specific, and haploid-specific genes. Active Ste12, therefore, is capable of activating all genes under its control through interaction with its cofactors. Thus, a key to the signaling specificity is selective regulation of the associated cofactors. Degradation of Tec1 specifically disassociates Ste12 from the promoters of filamentation genes and turns off the filamentation transcriptional program (1, 7, 8). Degradation of Tec1 may also allow maximal induction of mating genes (7). Therefore, signaling specificity for Ste12 in regulating multiple developmental pathways is achieved by its ability to associate with other transcription factors and by selective regulation of the associated factors.
Conclusion. Ste12 forms two distinctive complexes, Ste12/Dig1/Dig2 and Tec1/Ste12/Dig1, by competitive binding of Dig2 and Tec1 to the N terminus of Ste12. Most filamentation genes are regulated by the Tec1/Ste12/Dig1 complex via Tec1 binding sites.
This work is supported by National Institutes of Health Grant GM55155. S. Chou was a predoctoral fellow of a training grant from the University of California Systemwide Biotechnology Research and Education program.
Supplemental material for this article may be found at http://mcb.asm.org/. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»