Previous Article | Next Article ![]()
Molecular and Cellular Biology, February 2009, p. 919-928, Vol. 29, No. 3
0270-7306/09/$08.00+0 doi:10.1128/MCB.00907-08
Copyright © 2009, American Society for Microbiology. All Rights Reserved.
Subunits of Protein Phosphatase 2A
Koji Okamoto,
Melissa J. Peart, and
Carol Prives*
Department of Biological Sciences, Columbia University, New York, New York 10027
Received 6 June 2008/ Returned for modification 11 July 2008/ Accepted 24 October 2008
|
|
|---|
1 subunit of the serine/threonine protein phosphatase 2A, which binds to cyclin G1, can stabilize cyclin G1 under unstressed conditions and upon DNA damage, as well as inhibit the ability of cyclin G1 to be ubiquitinated. Our results thus indicate that proteasomal turnover of cyclin G1 is regulated by noncanonical processes. |
|
|---|
We previously showed that cyclin G1 binds to protein phosphatase 2A (PP2A) through its ability to interact with members of the B'
regulatory subunits (42). This interaction results in dephosphorylation of MDM2 at a minimum of two sites, T216 in mouse MDM2 and Ser166 in human MDM2 (HDM2) (43). We also showed that MDM2 phosphorylated at T216 binds less well to p53 (60). Correspondingly, MDM2 protein in cyclin G1 knockout mice is hyperphosphorylated at T216, and the levels of p53 are significantly higher than those in wild-type mouse embryonic fibroblasts (43).
Because of the complexity of its possible roles, we have investigated how the cyclin G1 protein itself is regulated. Cyclin G1 was so named because it has a typical cyclin box, although it lacks the PEST sequence that is required for degradation of the canonical cyclins. Thus, it is not clear how cyclin G1 protein turnover is controlled. Most proteins that are degraded by the proteasome need to first be conjugated to ubiquitin, a 9-kDa protein that can form polyubiquitination chains at an internal lysine residue(s) (19, 44). There are exceptions to this, and a small group of proteins are known to undergo lysineless ubiquitination and instead to have ubiquitin conjugated at the N-terminal methionine (11). Such proteins include p21 (5), the p14/19 ARF protein (29, 30), Id1 (52), Id2 (14), ERK3 (12), MyoD (6), LMP1 (1), LMP2A (21), the human papillomavirus 16 (HPV-16) oncoprotein E7 (3, 47), and HPV-58 E7 (1). Of these proteins, ARF and HPV-58 E7 are the most physiologically relevant examples because they are naturally occurring lysineless proteins that are degraded by the proteasome (29, 30), whereas for the other proteins, the mutated lysineless versions were identified as substrates for N-terminal ubiquitination.
Here we have examined the turnover of cyclin G1 and found that its degradation proceeds by lysineless ubiquitination and a proteasome-mediated degradation pathway that most likely involves its N terminus. Furthermore, the B' subunit of PP2A stabilizes cyclin G1 by inhibiting its proteasome-mediated degradation.
|
|
|---|
1, B'
2, and B
1 cDNAs (pCMV-F-B'
1, pCMV-F-B'
2, and pCMV-F-B
1, respectively) have been described (42, 54). A hemagglutinin (HA)-tagged cyclin G1 construct was previously described (43). Flag-tagged human cyclin G1 was kindly provided by Karen Vousden, and the V5-tagged cyclin G2 cDNA expression vector was a generous gift from Mary Horn. The PCMV-HA-ubiquitin expression construct was obtained from D. Bohmann. BamHI-NotI sites were used to clone the human cyclin G1 cDNA into a pTRE2hyg vector (Clontech). HA-tagged N-terminal (residues 1 to 137) and C-terminal (residues 136 to 294) cyclin G1 portions were generated by PCR, using full-length cyclin G1 cDNA as the template. Multiple lysine mutations were generated by subsequent site-directed mutagenesis, using full-length cyclin G1 or the N-terminal portion (residues 1 to 137) as the template (Invitrogen). All mutant constructs were confirmed by sequencing. Cells and culture conditions. NIH 3T3 cells, p53- and MDM2-null mouse 2KO cells, HeLa Tet-on cells (Clontech), and H1299 cells were cultured in Dulbecco's modified Eagle's medium with 10% fetal bovine serum at 37°C in 5% CO2. Clone 6 rat cells were cultured in Dulbecco's modified Eagle's medium with 10% fetal bovine serum at 38°C in 5% CO2. MG132 (Sigma), E64 (Calbiochem), and cycloheximide (Sigma) were dissolved in dimethyl sulfoxide. LLnL (Sigma) was dissolved in 100% ethanol. Doxycycline (Sigma) and neocarzinostatin (NCS) (500 ng/ml; Kayaku Co., Tokyo, Japan) were dissolved in H2O. Transfections were performed using Lipofectamine (Invitrogen). In each experiment, 2 µg of DNA and 10 µl of Lipofectamine were introduced into 5 x 105 cells. To generate human cell lines with inducible cyclin G1, the pTRE2-hyg human Flag-tagged cyclin G1 plasmid was transfected into HeLa Tet-on cells (Clontech), and hygromycin B (400 µg/ml; Invitrogen)-resistant clones were isolated. Doxycycline-inducible Flag-tagged human cyclin G1 clones were selected by immunoblotting with M2 antibody (Sigma). One of the clones that expressed human Flag-cyclin G1 tightly controlled by doxycycline (low-level leakage) was selected for the experiments (clone 2), and additional clones were also characterized.
Antibodies. Polyclonal rabbit anti-cyclin G1 antibody 178 was previously described (43). The following antibodies were obtained commercially: anti-HA (H11) antibody (Covance), anti-HA (3F10) antibody (Roche), M2 monoclonal antibody (Sigma), anti-green fluorescent protein (anti-GFP) antibody (Clontech), polyclonal rabbit antibody H-46 (Santa Cruz), and anti-V5 antibody (Invitrogen). The anti-mouse secondary antibody True Blot was obtained from Bioscience, and Alexa Fluor 680 or 800-conjugated goat anti-rabbit and -mouse immunoglobulin G secondary antibodies were purchased from Molecular Probes.
Immunoprecipitation and immunoblot analysis. Cells were lysed in LB buffer containing 50 mM Tris-HCl, pH 8.0, 150 mM NaCl, 1 mM EDTA, 1% NP-40, aprotinin, phenylmethylsulfonyl fluoride, 1 mM EDTA, and 1 mM MgCl2. For immunoprecipitation, cells were lysed in TEGN buffer, containing 50 mM Tris-HCl, pH 8.0, 1 mM EDTA, 10% glycerol, and 0.5% NP-40. Washing buffer contained an additional 200 mM NaCl. An Odyssey scanning system was used for quantitation of protein levels in immunoblots. Alexa Fluor 680 or 800-conjugated goat anti-rabbit or -mouse immunoglobulin G secondary antibodies were used, followed by Odyssey scanning and analysis by Odyssey software, version 2.0.
In vivo ubiquitinylation assays. Cells were lysed in buffer, followed by sonication three times for 10 s each time. Cell lysates were either subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) or immunoprecipitated with the indicated antibodies and protein G-Sepharose 4 Fast (Pharmacia).
|
|
|---|
![]() View larger version (15K): [in a new window] |
FIG. 1. Ectopically expressed murine cyclin G1 is short-lived. NIH 3T3 cells were transfected with constructs expressing mouse cyclin G1 (cycG1) tagged with an HA epitope at the C terminus, C-terminally V5-tagged cyclin G2 (cycG2), or empty pcDNA3 vector (Pc) for 20 h. Cells were then treated with 0.1 µg/ml cycloheximide (CHX) for the indicated times prior to lysis. Equivalent amounts of protein (30 µg) were separated by 10% SDS-PAGE and subjected to immunoblotting with polyclonal antibody 178 for cyclin G1 and anti-V5 monoclonal antibody for cyclin G2. Results were quantitated using an Odyssey scanning system.
|
![]() View larger version (35K): [in a new window] |
FIG. 2. Exogenously and endogenously expressed cyclin G1 protein can be stabilized by inhibitors of the 26S proteasome. (A) NIH 3T3 cells were transfected with constructs expressing murine cyclin G1 or with empty pcDNA3 vector (Pc) for 20 h, after which cells were left untreated or treated with LLnL (25 µM), E-64 (50 µM), or MG132 (50 µM) for 5 h. Equivalent amounts of cell lysates (30 µg) were separated by 10% SDS-PAGE and immunoblotted with cyclin G1 (178) or actin antibodies, as indicated. DMSO, dimethyl sulfoxide. (B) Clone 6 rat cells expressing temperature-sensitive mutant p53 (A135V) were maintained at 38°C. Cells were shifted to 32°C for 5 h and then either left untreated or treated with 5 µM (+), 10 µM (++), or 50 µM (+++) MG132 for an additional 5 h. Cells were lysed and separated by 10% SDS-PAGE followed by immunoblotting with the indicated antibodies, as in panel A. Parallel cultures maintained at 38°C were left untreated or treated with 50 µM MG132 for 5 h and then treated as described above. (C) HeLa Tet-on cells (clone 2), engineered to express tetracycline/doxycycline-inducible human cyclin G1 as described in Materials and Methods, were plated for 24 h, followed by treatment with or without doxycycline (2 ng/ml) for 20 h. Cells were then either left untreated or treated with 25 µM MG132 for an additional 5 h prior to lysis. Equivalent amounts of cell extracts (30 µg) were separated by SDS-PAGE and immunoblotted with anti-human cyclin G1 polyclonal antibody H-46 or anti-actin antibody. (D) H1299 cells were left untreated or treated with 50 µM MG132 for 4 h prior to lysis and separation of cell extracts (50 µg) by 10% SDS-PAGE followed by immunoblotting with H-46 and antiactin antibodies.
|
![]() View larger version (31K): [in a new window] |
FIG. 3. Ubiquitination of cyclin G1. (A) H1299 cells were cotransfected with Flag-tagged human cyclin G1 and HA-tagged ubiquitin expression plasmids for 20 h, followed by treatment with 50 µM MG132 for 4 h. Cell lysates were immunoprecipitated with anti-Flag antibody (M2) and subjected to SDS-PAGE and immunoblotting with M2 or HA antibodies. (B) NIH 3T3 cells were cotransfected with untagged mouse cyclin G1 and HA-tagged ubiquitin expression plasmids or with empty pcDNA3 vector (Pc) for 20 h. Cells were left untreated or treated with 50 µM MG132 for 4 h. Cell lysates were separated by 8% SDS-PAGE and immunoblotted with cyclin G1 (178) or actin antibodies. The middle panel shows a shorter exposure of the same blot, showing cyclin G1 protein levels. G1-Ub1 and G1-HA-Ub1 indicate a single endogenous and ectopic HA-tagged ubiquitin molecule conjugated to ectopic cyclin G1, respectively. G1-Ub2 and G1-HA-Ub2 indicate two endogenous and ectopic HA-ubiquitin molecules conjugated to ectopic cyclin G1 protein, respectively.
|
![]() View larger version (37K): [in a new window] |
FIG. 4. The N terminus of cyclin G1 is required for its ubiquitination and degradation. (A) NIH 3T3 cells were transfected with constructs expressing HA-tagged full-length (residues 1 to 294), C-terminal (residues 136 to 294), or N-terminal (residues 1 to 137) murine cyclin G1 or empty pcDNA3 vector (Pc) for 28 h and then were left untreated or treated with LLnL (25 µM) for 12 h. Equivalent amounts of cell lysates (30 µg) were separated by 12% SDS-PAGE and immunoblotted with anti-HA, antiactin, or anti-GFP antibodies (as a transfection control). (B) NIH 3T3 cells were transfected with constructs expressing HA-tagged full-length (residues 1 to 294) and C-terminal (residues 136 to 294) murine cyclin G1 with His-tagged ubiquitin for 24 h, followed by treatment with 25 µM MG132 for 5 h. Cell lysates were analyzed by immunoprecipitation with anti-HA antibody 3F10 and then by immunoblotting with anti-His antibody or anti-HA antibody.
|
![]() View larger version (35K): [in a new window] |
FIG. 5. All lysines in the N terminus of cyclin G1 are dispensable for its degradation and ubiquitination. (A) Positions of the eight lysine residues in the N-terminal 137 amino acids of the murine cyclin G1 protein. (B) NIH 3T3 cells were transfected with constructs expressing an N-terminal version (residues 1 to 137) of wild-type or lysine substitution (3KR, 5KR, and 7KR) mutant cyclin G1 or with empty pcDNA3 vector (Pc) for 28 h and then were left untreated (–) or treated (+) with LLnL (+) (25 µM) for 12 h. Cell extracts (30 µg) were separated by 12% SDS-PAGE and immunoblotted with anti-cyclin G1 (178), anti-GFP, or antiactin antibodies. For N-terminal (residues 1 to 137) cyclin G1 substitution mutants, 3KR represents K11R, K29R, and K34R mutations; 5KR represents K11R, K29R, K34R, K56R, and K85R mutations; and 7KR represents K11R, K29R, K34R, K56R, K85R, K87R, and K91R mutations. (C) NIH 3T3 cells were transfected with constructs expressing full-length versions of wild-type or N-terminal lysine substitution (4KR, 6KR, or 8KR) mutant cyclin G1 or with empty pcDNA3 vector (Pc) for 28 h and then were left untreated (–) or treated with LLnL (+) (25 uM) for 12 h. Cell extracts (30 µg) were separated by 10% SDS-PAGE and immunoblotted with anti-cyclin G1 (178) or antiactin antibodies. The graph shows the increase (fold change) in wild-type and mutant cyclin G1 proteins compared with untreated levels, as analyzed by an Odyssey scanning system. For full-length cyclin G1 substitution mutants, 4KR represents K11R, K29R, K34R, and K56R mutations; 6KR represents K11R, K29R, K34R, K56R, K85R, and K87R mutations; and 8KR represents K11R, K29R, K34R, K56R, K85R, K87R, K91R, and K106R mutations. (D) NIH 3T3 cells were transfected with wild-type or mutant (8KR) N-terminal (residues 1 to 137) cyclin G1 as in panel C, with or without HA-ubiquitin, for 24 h, followed by treatment with MG132 (25 µM) for 5 h. Cell lysates were separated by 12% SDS-PAGE and immunoblotted with anti-cyclin G1 (178) or antiactin antibodies. The middle panel shows a shorter exposure of the cyclin G1 portion of the blot. G1-Ub1, G1-Ub2, G1-HA-Ub, and G1-HA-Ub2 are described in the legend to Fig. 3B.
|
![]() View larger version (35K): [in a new window] |
FIG. 6. A six-Myc epitope tag at the N terminus stabilizes cyclin G11-137. (A) NIH 3T3 cells were transfected with six-Myc-tagged cyclin G11-137 or untagged cyclin G11-137 for 24 h, followed by treatment with cycloheximide (0.1 µg/ml). Cells were lysed at the indicated times posttreatment, and lysates were separated by 12% SDS-PAGE followed by immunoblotting with cyclin G1 and actin antibodies as described above. Cyclin G1 protein was quantitated using an Odyssey system. (B) NIH 3T3 cells were transfected with constructs expressing six-Myc-tagged and untagged cyclin G11-137, with or without HA-ubiquitin, for 24 h and then either left untreated or treated with 25 µM MG132 in dimethyl sulfoxide for 5 h. Cell lysates were separated by 12% SDS-PAGE and immunoblotted with anti-cyclin G1, antiactin, or anti-GFP antibodies, as indicated on the right. On the left are indicated one or two molecules of untagged endogenous ubiquitin (Ub1 and Ub2) or ectopic HA-tagged ubiquitin (HA-Ub1 and HA-Ub2) conjugated to cyclin G1. Long and short exposures of the immunoblot of cyclin G1 are indicated.
|
![]() View larger version (41K): [in a new window] |
FIG. 7. Cyclin G1 degradation by the 26S proteasome is p53 and MDM2 independent. (A) MDM2–/– p53–/– (2KO) cells were transfected with the N-terminal cyclin G11-137 construct or empty pcDNA3 vector (Pc) for 28 h and either left untreated or treated with LLnL (25 µM) for 12 h. Cell extracts (30 µg) were separated by 12% SDS-PAGE and analyzed by immunoblotting. (B) HeLa Tet-on cells expressing human cyclin G1 (clone 2) were left untreated or treated with doxycycline (2 ng/ml) and, at the same time, were transfected with increasing amounts of Flag-HDM2 for 24 h (0.5 µg, 1.0 µg, and 2.0 µg) or 42 h (0.2 µg, 0.5 µg, 1.0 µg, and 2.0 µg) or with empty pcDNA3 vector (Pc). Cell lysates were separated by 10% SDS-PAGE and analyzed by immunoblotting with anti-Flag (M2), anti-human cyclin G1 (H-46), or antiactin antibodies. (C) HeLa Tet-on cells (clone 2) without doxycycline were transfected with 0.3 µg of p53-expressing plasmid, with or without 1.5 µg of HDM2-expressing plasmid, for 24 h. Cell lysates were separated by 10% SDS-PAGE and analyzed by immunoblotting with anti-Flag (M2), anti-p53 (DO-1), or anti-GFP antibodies.
|
1 subunit of PP2A.
While free p21 and ARF can be targeted by the 26S proteasome, binding of these proteins to cdk2, cdk4 (p21), and B23 (ARF) stabilizes them (5, 29). As mentioned above, members of the B'
subfamily of PP2A phosphatase can interact with cyclin G1. The interaction between cyclin G1 and B'
1 is reasonably strong, as the cyclin G-B'
1 complexes are stable even in 2% NP-40 and 400 mM NaCl (42), and the majority of cyclin G1 protein is associated with high-molecular-weight complexes containing PP2A (42, 43). We therefore considered that members of the B'
family may regulate cyclin G1 turnover. To test this hypothesis, ectopic Flag-tagged B'
proteins were introduced into HeLa cells expressing inducible human cyclin G, and their impact on cyclin G1 protein levels was assessed. Indeed, cyclin G1 levels were markedly increased by Flag-B'
1 under both noninduced and doxcycline-induced conditions (Fig. 8A). Augmentation of cyclin G1 by B'
1 was comparable to the effect of treating cells with MG132. Furthermore, we found that B'
2 expression increased cyclin G1 levels to the same extent as B'
1 (Fig. 8B), whereas another version of the PP2A B subunit (B
) that cannot bind cyclin G1 had no such stabilizing effect. The effect of the B'
subunit was p53 and MDM2 independent, since the same results were obtained with 2KO cells (Fig. 8C). Notably, the 8KR mutant form of full-length cyclin G1, described in Fig. 5, was stabilized to the same extent as wild-type cyclin G1. Most importantly, evidence that cyclin G1 proteasomal turnover was regulated by B'
was derived from experiments showing that the half-life of cyclin G1 was greatly increased in the presence of B'
(Fig. 8D) and that association of ectopically expressed HA-ubiquitin with cyclin G1 was markedly reduced in the presence of B'
1 but not B
(Fig. 8E). Interestingly, B'
1 did not stabilize either the N-terminal (residues 1 to 137) or C-terminal (residues 136 to 294) portion of cyclin G1 (data not shown), suggesting that it requires interaction with both parts of the cyclin G1 protein. This is consistent with the observation that unlike full-length cyclin G1, neither cyclin G11-137 nor cyclin G1136-294 can form stable interactions with B'
1 (data not shown). Taken together, these data demonstrate that the B'
1 and B'
2 regulatory subunits of PP2A stabilize cyclin G1 by inhibiting its ubiquitination and degradation by the 26S proteasome.
![]() View larger version (51K): [in a new window] |
FIG. 8. B' family subunits of PP2A stabilize human cyclin G1 protein. (A) HeLa Tet-on cells (clone 2) that were untreated or treated with doxycycline (Dox; 2 ng/ml) were transfected with empty pcDNA3 vector (Pc) or a vector expressing the Flag-tagged B' 1 subunit of PP2A (B' 1) for 42 h. Equivalent amounts of cell lysates (30 µg) were separated by 10% SDS-PAGE and immunoblotted (IB) with anti-Flag (M2), anti-human cyclin G1 (H-46), or antiactin antibodies. The final lane contained an extract of cells transfected with pcDNA3 and treated with doxycycline as described above, but MG132 (25 µM) was added for another 4 h. (B) HeLa Tet-on cells (clone 2) were left untreated or treated with 2 ng/ml doxycycline and, at the same time, were transfected with pcDNA3 (Pc), Flag-B' 1, Flag-B' 2, or Flag-B for 42 h. Equivalent amounts (30 µg) of cell lysates were separated by 10% SDS-PAGE and immunoblotted with anti-Flag (M2), anti-human cyclin G1 (H-46), or antiactin antibodies. (C) 2KO cells were transfected with empty pcDNA3 vector (Pc) or with constructs expressing wild-type (WT) or 8KR mutant full-length mouse cyclin G1, with or without the Flag-B' 1 subunit of PP2A, for 24 h. Cell lysates were separated by 10% SDS-PAGE and immunoblotted with anti-Flag (M2), anti-cyclin G1 (178), antiactin, or anti-GFP antibodies. (D) (Top) COS-1 cells were transfected with constructs expressing wild-type full-length mouse cyclin G1, with or without Flag-B' 1. Forty-eight hours after transfection, the transfected cells were labeled with [35S]methionine for 3 h and further incubated with unlabeled medium for the indicated chase periods. Subsequently, lysates prepared from the labeled cells were used for immunoprecipitation with anti-cyclin G1 antibody (178). The immunoprecipitated cyclin G1 was then separated by 10% SDS-PAGE and processed for fluorography. (Bottom) The intensity of the labeled cyclin G1 after each chase time was quantified by densitometry, and the quantified results of the pulse-chase analyses are presented on a logarithmic scale. The presented values were calculated as follows: level of labeled cyclin G1 at the indicated time for the chase period/level of cyclin G at the start of the chase period. (E) HeLa Tet-on cells (clone 2) were left untreated (–) or treated (+) with doxycycline (Dox; 2 ng/ml) as indicated and, at the same time, were transfected with constructs expressing either empty pcDNA3 vector (Pc) or HA-ubiquitin (HA-Ub), with or without either Flag-B' 1 or Flag-B , for 24 h as indicated, followed by treatment with MG132 (25 nM) for 4 h. Equivalent amounts (1 mg) of cell lysates were immunoprecipitated with anti-cyclin G1 antibody H-46. The immunoprecipitates were separated by 10% SDS-PAGE and immunoblotted with anti-HA and anti-human cyclin G1 (H-46) antibodies. Flag-B' 1 and Flag-B were immunoblotted with anti-Flag (M2) antibody from 30 µg of cell lysates.
|
subunit of PP2A.
Finally, we wanted to determine whether DNA damage affects the protein stability of cyclin G1. For this purpose, we used our HeLa cells expressing doxycycline-inducible Flag-tagged human cyclin G1. These cells were induced with doxycycline for 48 h and mock treated or treated with the radiomimetic agent NCS for 5 h, and cyclin G1 protein stability was analyzed by a cycloheximide chase. We found that the half-life of N-terminally Flag-tagged human cyclin G1 in untreated cells was approximately 50 min (Fig. 9A and B), similar to the half-life of six-Myc-tagged cyclin G11-137 (Fig. 6A). However, upon NCS treatment, the half-life of Flag-tagged human cyclin G1 was reduced to 15 min (Fig. 9A and B), showing that DNA damage destabilizes cyclin G1 protein. In addition, NCS destabilized ectopic mouse cyclin G1 in NIH 3T3 cells (data not shown). More interestingly, we found that in the presence of ectopic B'
1, NCS could not destabilize cyclin G1 compared with pcDNA3 vector (Fig. 9C). These data indicate that the B'
1 regulatory subunit of PP2A also plays a role in stabilizing cyclin G1 in the DNA damage environment.
![]() View larger version (28K): [in a new window] |
FIG. 9. The B' 1 subunit of PP2A stabilizes human cyclin G1 protein under DNA damaging conditions. (A) HeLa Tet-on cells (clone 2) expressing Flag-tagged human cyclin G1 were plated with or without 2 ng/ml of doxycycline (Dox) for 48 h. The cells were either left untreated or treated with 330 ng/ml of NCS for 5 h and then were treated with cycloheximide (CHX) (0.1 µg/ml) and harvested at the indicated time points. Cell lysates (20 µg) were separated by 10% SDS-PAGE and immunoblotted with anti-cyclin G1 polyclonal (H-46) or antiactin antibodies. (B) Cyclin G1 protein was quantitated using NIH ImageJ software. (C) HeLa Tet-on cells expressing Flag-tagged human cyclin G1 were plated with or without 2 ng/ml of doxycycline (Dox) for 16 h, followed by transfection with vector pcDNA3 (Pc) or B' 1 for 24 h. NCS (330 ng/ml) was added 5 h prior to lysis. Equivalent amounts of cell lysates (30 µg) were separated by 10% SDS-PAGE and immunoblotted with the indicated antibodies.
|
|
|
|---|
Our further investigations into the mechanisms involved in cyclin G1 degradation revealed that cyclin G1 is not degraded through the internal lysine-dependent ubiquitination pathway. Strikingly, mutation of all eight internal lysine residues in the context of the full-length or N-terminal portion of cyclin G1 did not affect the extent to which these proteins were stabilized by LLnL or ubiquitinated, indicating that the ubiquitination and degradation of cyclin G1 occur in a lysine-independent manner. As mentioned earlier, lysineless ubiquitination has been reported for other proteins. Instead, these proteins are ubiquitinated at their N termini and the addition of an N-terminal tag stabilizes them, most probably by blocking access of ubiquitin to the N-terminal residue (11). Here we show that placing an extra sequence at the N terminus of cyclin G1 stabilizes the protein and reduces its degradation by the proteasome, suggesting that cyclin G1 is also ubiquitinated at its N terminus. The physiological relevance of N-terminal ubiquitination remains to be determined. However, Sun et al. recently showed that glucocorticoids differentially regulate MyoD and Id1 degradation by N-terminal ubiquitination in myotubes, demonstrating a key role for the N terminus-dependent ubiquitination pathway in the physiology of muscle protein degradation (52). In addition to MyoD, which can be degraded by both the lysine-dependent and N-terminal ubiquitination pathways, multiple mechanisms of degradation have been reported for p21 (9, 10, 32, 49). Deciphering the functional significance of these alternate degradation pathways for cyclin G1 and other proteins remains a future challenge.
The MDM2 protein, a p53 target and E3 ubiquitin ligase, is the main negative regulator of p53 (15, 16, 37). In addition to p53, MDM2 functions as a ubiquitin ligase for pRB (56, 57), Numb (59), histone 2B (36), MDMX (13), and MDM2 itself (15, 20). It was reported that p21 physically binds to MDM2, and although p21 degradation does not require MDM2 ubiquitin ligase activity, MDM2 promotes p21 degradation by facilitating binding of p21 with the proteasome C8 subunit (61). ARF also binds to MDM2, although its turnover does not require MDM2 (29). We found that cyclin G1 binds to MDM2 at both its C-terminal RING and central acidic regions (43), although whether MDM2 could target cyclin G1 for degradation was not examined. We showed here that intermediate levels of overexpressed MDM2 had a slight impact on cyclin G1 levels. Similarly, Zhao et al. showed that cyclin G1 expression was progressively reduced as Mdm2 expression was increased (62). Taken together, these data suggest that perhaps MDM2 can directly (or indirectly) impact cyclin G1 degradation under certain conditions. However, data obtained using the 2KO cell line, which lacks both the MDM2 and p53 genes, and a small interfering RNA against MDM2 indicate that MDM2 is unlikely to be the primary E3 ligase for cyclin G1. It remains to be determined whether MDMX has a role to play in the ubiquitination and degradation of cyclin G1.
Our findings strongly implicate PP2A as a major regulator of cyclin G1 stability. First, increasing the levels of the regulatory B'
subunits of PP2A promotes the accumulation of cyclin G1 by interfering with its turnover. Moreover, association of cyclin G1 with the B'
subunit of PP2A inhibited its ubiquitination. In addition, B'
1 was found to stabilize cyclin G1 under DNA damaging conditions. How might PP2A regulate the turnover of cyclin G1? PP2A regulates the stability of other proteins, including c-myc, the Pim family of protein kinases, and securin (17, 34, 58). Each of these proteins interacts with the enzymatically active PP2A and is a substrate of PP2A phosphatase. The dephosphorylation of c-myc and the Pim kinases by PP2A leads to their proteolysis, whereas PP2A stabilizes securin by removing phosphate groups that target the protein for degradation via the SCF ubiquitin ligase. We previously showed that upon p53 induction, cyclin G1 forms a complex with enzymatically active PP2A, which dephosphorylates MDM2 and thereby negatively regulates p53 function (43). It remains to be determined whether cyclin G1 itself is a substrate of PP2A and if the stability of cyclin G1 is regulated by phosphorylation.
Given the complexity of proposed functions for cyclin G1, the physiological significance of cyclin G1 stability control is not immediately obvious. Since the discovery of cyclin G1 as a target of p53, it has been described as both a positive and negative regulator of cell growth (8). Most recently, Jones et al. showed that cyclin G1 drives apoptosis of neural crest cells, which can be prevented by p53 inhibition (25). Cyclin G1 has also been associated with genomic instability and is frequently overexpressed in human tumors, such as cervical carcinoma (33) and human hepatocellular carcinoma (18). In addition to cyclin G1, other negative regulators of p53, including Mdm2 and COP1, are also found overexpressed in tumors, and their increased levels have been shown to downregulate p53 function. Similar to cyclin G1, these proteins are also rapidly turned over, and this may be important to allow full activation of p53-dependent pathways, thereby preventing tumorigenesis. Cyclin G1 is also involved in various p53-independent activities, which may not be surprising given the complexity of its roles in cells and its many interacting partners. Unraveling the mechanisms involved in cyclin G1 stability control will likely provide further insight into the role of cyclin G1 during normal differentiation and malignant transformation.
This work was supported by a C. J. Martin fellowship from the National Health and Medical Research Council of Australia to M.J.P. and by NIH grants CA58316 and CA87497.
Published ahead of print on 3 November 2008. ![]()
Present address: Center for Prostate Disease Research, Uniformed Services University of the Health Sciences, Rockville, MD 20852. ![]()
Present address: National Cancer Center Research Institute, 5-1-1 Tsukiji Bunkyo-ku, Tokyo 1040045, Japan. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»